|
An anode is an electrode through which (positive) electric current flows into a polarized electrical device. Mnemonic: ACID (Anode Current Into Device). Image File history File links File links The following pages link to this file: Anode ...
Image File history File links File links The following pages link to this file: Anode ...
General Name, symbol, number zinc, Zn, 30 Chemical series transition metals Group, period, block 12, 4, d Appearance bluish pale gray Standard atomic weight 65. ...
The Galvanic cell, named after Luigi Galvani, consists of two different metals connected by a salt bridge or a porous disk between the individual half-cells. ...
For other uses, see Electrode (disambiguation). ...
This box: Electric current is the flow (movement) of electric charge. ...
To dispel a common misconception, often incorrectly inferred from the correct fact that in all electrochemical devices negatively charged anions move towards the anode and/or positively charged cations move away from it, anode polarity is not always positive but depends on the device type, and sometimes even in which mode it operates, as determined by the above current direction-based universal definition. Examples:
- In a discharging battery or galvanic cell (drawing) the anode is the negative terminal, where conventional current flows in. This inwards current is carried externally by electrons moving outwards, negative charge moving one way amounting to positive current flowing the other way. It is continued internally by positive ions moving into the electrolyte, i.e. surprisingly away from the more negative electrode and towards the more positive one (chemical energy is responsible for this "uphill" motion).
- In a recharging battery, or an electrolytic cell, the anode is the positive terminal, which receives current from an external generator.
- In a diode, it is the positive terminal at the tail of the arrow symbol, where current flows into the device. Note electrode naming for diodes is always based on the direction of the forward current (that of the arrow, in which the current flows "most easily"), even for types such as zener diodes or solar cells where the current of interest is the reverse current.
- In a cathode ray tube, it is the positive terminal where electrons flow out, i.e. where current flows in.
An electrode through which current flows the other way (out) is a cathode. The Galvanic cell, named after Luigi Galvani, consists of two different metals connected by a salt bridge or a porous disk between the individual half-cells. ...
In electricity, current is the rate of flow of charges, usually through a metal wire or some other electrical conductor. ...
An electrolyte is a substance containing free ions that behaves as an electrically conductive medium. ...
// Electrolytic cells are composed of a vessel used to do electrolysis, containing electrolyte, usually a solution of water or other solvents capable of dissolving various ions into solution, and a cathode and anode. ...
Closeup of the image below, showing the square shaped semiconductor crystal various semiconductor diodes, below a bridge rectifier Structure of a vacuum tube diode In electronics, a diode is a two-terminal component, almost always one that has electrical properties which vary depending on the direction of flow of charge...
Cathode ray tube employing electromagnetic focus and deflection Cutaway rendering of a color CRT: 1. ...
Diagram of a copper cathode in a Daniells cell. ...
Etymology
The word was coined in 1834 from the Greek ἄνοδος (anodos), 'way up', by William Whewell, who had been consulted[1] by Michael Faraday over some new names needed to complete a paper on the recently discovered process of electrolysis. In that paper Faraday explained that when an electrolytic cell is oriented so that electric current traverses the "decomposing body" (electrolyte) in a direction "from East to West, or, which will strengthen this help to the memory, that in which the sun appears to move", the anode is where the current enters the electrolyte, on the East side: "ano upwards, odos a way ; the way which the sun rises" ([2], reprinted in [3]). Year 1834 (MDCCCXXXIV) was a common year starting on Wednesday (link will display the full calendar) of the Gregorian Calendar (or a common year starting on Monday of the 12-day slower Julian calendar). ...
William Whewell In later life William Whewell (May 24, 1794 – March 6, 1866) was an English polymath, scientist, Anglican priest, philosopher, theologian, and historian of science. ...
Michael Faraday, FRS (September 22, 1791 – August 25, 1867) was an English chemist and physicist (or natural philosopher, in the terminology of that time) who contributed to the fields of electromagnetism and electrochemistry. ...
The use of 'East' to mean the 'in' direction (actually 'in' → 'East' → 'sunrise' → 'up') may appear unnecessarily contrived. Previously, as related in the first reference cited above, Faraday had used the more straightforward term "eisode" (the doorway where the current enters). His motivation for changing it to something meaning 'the East electrode' (other candidates had been "eastode", "oriode" and "anatolode") was to make it immune to a possible later change in the direction convention for current, whose exact nature was not known at the time. The reference he used to this effect was the Earth's magnetic field direction, which at that time was believed to be invariant. He fundamentally defined his arbitrary orientation for the cell as being that in which the internal current would run parallel to and in the same direction as a hypothetical magnetizing current loop around the local line of latitude which would induce a magnetic dipole field oriented like the Earth's. This made the internal current East to West as previously mentioned, but in the event of a later convention change it would have become West to East, so that the East electrode would not have been the 'way in' any more. Therefore "eisode" would have become inappropriate, whereas "anode" meaning 'East electrode' would have remained correct with respect to the unchanged direction of the actual phenomenon underlying the current, then unknown but, he thought, unambiguously defined by the magnetic reference. In retrospect the name change was unfortunate, not only because the Greek roots alone do not reveal the anode's function any more, but more importantly because, as we now know, the Earth's magnetic field direction on which the "anode" term is based is subject to reversals whereas the current direction convention on which the "eisode" term was based has no reason to change in the future. This box: Electric current is the flow (movement) of electric charge. ...
For other uses, see Solenoid (disambiguation). ...
The Earths magnetic field, which is approximately a dipole. ...
Recent geomagnetic reversals. ...
This box: Electric current is the flow (movement) of electric charge. ...
Since the later discovery of the electron an easier to remember, and more durably correct technically although historically false etymology has been suggested: anode, from the Greek anodos, 'way up', 'the way (up) out of the cell (or other device) for electrons'. For other uses, see Electron (disambiguation). ...
Flow of electrons The flow of electrons is always from anode–to–cathode outside of the cell or device, regardless of the cell or device type and operating mode, with the exception of diodes where electrode naming always assumes current flows in the forward direction (that of the arrow symbol), i.e. electrons flow in the opposite direction, even when the diode reverse-conducts either by accident (breakdown of a normal diode) or by design (breakdown of a Zener diode, photo-current of a photodiode or solar cell).
Electrolytic anode In electrochemistry, the anode is where oxidation occurs, and is the positive polarity contact in an electrolytic cell. At the anode, anions (negative ions) are forced by the electrical potential to react chemically and give off electrons (oxidation) which then flow up and into the driving circuit. English chemists John Daniell (left) and Michael Faraday (right), both credited to be founders of electrochemistry as known today. ...
The most fundamental reactions in chemistry are the redox processes. ...
// Electrolytic cells are composed of a vessel used to do electrolysis, containing electrolyte, usually a solution of water or other solvents capable of dissolving various ions into solution, and a cathode and anode. ...
...
Battery or galvanic cell anode In a battery or galvanic cell, the anode is the negative electrode from which electrons flow out towards the external part of the circuit. Internally the positively charged cations are flowing away from the anode (even though it is negative and therefore would be expected to attract them, this is due to electrode potential relative to the electrolyte solution being different for the anode and cathode metal/electrolyte systems); but, external to the cell in the circuit, electrons are being pushed out through the negative contact and thus through the circuit by the voltage potential as would be expected. Note: in a galvanic cell, contrary to what occurs in an electrolytic cell, no anions flow to the anode, the internal current being entirely accounted for by the cations flowing away from it (cf drawing). A battery is of one or more electrochemical cells, which store chemical energy and make it available in an electrical form. ...
The Galvanic cell, named after Luigi Galvani, consists of two different metals connected by a salt bridge or a porous disk between the individual half-cells. ...
This article may be too technical for most readers to understand. ...
In the United States, many battery manufacturers regard the positive electrode as the anode, particularly in their technical literature. Though technically incorrect, it does resolve the problem of which electrode is the anode in a secondary (or rechargeable) cell. Using the traditional definition, the anode switches ends between charge and discharge cycles.
Vacuum tube anode In electronic vacuum devices such as a cathode ray tube, the anode is the positively charged electron collector. In a tube, the anode is a charged positive plate that collects the electrons emitted by the cathode through electric attraction. Cathode ray tube employing electromagnetic focus and deflection Cutaway rendering of a color CRT: 1. ...
Diode anode In a semiconductor diode, the anode is the P-doped layer which initially supplies holes to the junction. In the junction region, the holes supplied by the anode combine with electrons supplied from the N-doped region, creating a depleted zone. As the P-doped layer supplies holes to the depleted region, negative dope ions are left behind in the P-doped layer ('P' for positive charge-carrier ions). This creates a base negative charge on the anode. When a positive voltage is applied to anode of the diode from the circuit, more holes are able to be transferred to the depleted region, and this causes the diode to become conductive, allowing current to flow through the circuit. The terms anode and cathode should not be applied to a zener diode, since it allows flow in either direction, depending on the polarity of the applied potential (i.e. voltage). A semiconductor is a solid whose electrical conductivity is in between that of a conductor and that of an insulator, and can be controlled over a wide range, either permanently or dynamically. ...
Closeup of the image below, showing the square shaped semiconductor crystal various semiconductor diodes, below a bridge rectifier Structure of a vacuum tube diode In electronics, a diode is a two-terminal component, almost always one that has electrical properties which vary depending on the direction of flow of charge...
For the following two reasons the electron hole was introduced into calculations: If an electron is excited into higher state it leaves a hole in its old state. ...
For the following two reasons the electron hole was introduced into calculations: If an electron is excited into higher state it leaves a hole in its old state. ...
Sacrificial anode In cathodic protection, a metal anode that is more reactive to the corrosive environment of the system to be protected is electrically linked to the protected system, and partially corrodes or dissolves, which protects the metal of the system it is connected to. As an example, an iron or steel ship's hull may be protected by a zinc sacrificial anode, which will dissolve into the seawater and prevent the hull from being corroded. Sacrificial anodes are particularly needed for systems where a static charge is generated by the action of flowing liquids, such as pipelines and watercraft. Aluminium anodes mounted on a steel jacket structure Cathodic protection (CP) is a technique to control the corrosion of a metal surface by making that surface the cathode of an electrochemical cell. ...
For the hazard, see corrosive. ...
For other uses, see Iron (disambiguation). ...
For other uses, see Steel (disambiguation). ...
A hull is the body or frame of a ship or boat. ...
A sacrificial anode, or sacrificial rod, is a metallic anode used in an electrochemical process where it is intended to be dissolved to protect other metallic components. ...
Electrostatics (also known as static electricity) is the branch of physics that deals with the phenomena arising from what seem to be stationary electric charges. ...
At least one anode is found in tank-type hot water heaters. The anode should be removed and checked after 5 years(sooner if there is a sodium based water softner inline), and replaced if 6 inches (15 cm) or more of bare wire is showing. This will greatly extend the life of the tank.
Water heater anode information
Related antonym The opposite of an anode is a cathode. When the current through the device is reversed, the electrodes switch functions, so anode becomes cathode, while cathode becomes anode, as long as the reversed current is applied, with the exception of diodes where electrode naming is always based on the forward current direction. Diagram of a copper cathode in a Daniells cell. ...
Alternative meanings: There is also an Electric-type Pokémon named Electrode. ...
Diagram of a copper cathode in a Daniells cell. ...
Diagram of a copper cathode in a Daniells cell. ...
See also Diagram of a copper cathode in a Daniells cell. ...
These inexpensive carabiners have an anodised aluminium surface that has been dyed and are made in many colors. ...
Aluminum redirects here. ...
A battery is of one or more electrochemical cells, which store chemical energy and make it available in an electrical form. ...
Closeup of the image below, showing the square shaped semiconductor crystal various semiconductor diodes, below a bridge rectifier Structure of a vacuum tube diode In electronics, a diode is a two-terminal component, almost always one that has electrical properties which vary depending on the direction of flow of charge...
Aluminium anodes mounted on a steel jacket structure Cathodic protection (CP) is a technique to control the corrosion of a metal surface by making that surface the cathode of an electrochemical cell. ...
Electron tube can be used to describe either of two things: vacuum tube gas filled tube This is a disambiguation page — a navigational aid which lists other pages that might otherwise share the same title. ...
In chemistry and manufacturing, electrolysis is a method of separating chemically bonded elements and compounds by passing an electric current through them. ...
The Galvanic cell, named after Luigi Galvani, consists of two different metals connected by a salt bridge or a porous disk between the individual half-cells. ...
ed|other uses|reduction}} Illustration of a redox reaction Redox (shorthand for reduction/oxidation reaction) describes all chemical reactions in which atoms have their oxidation number (oxidation state) changed. ...
Primary cell terminology offers much scope for confusion. ...
References - ^ Ross, S, Faraday Consults the Scholars: The Origins of the Terms of Electrochemistry in Notes and Records of the Royal Society of London (1938-1996), Volume 16, Number 2 / 1961, Pages: 187 - 220, [1] consulted 2006-12-22
- ^ Faraday, Michael, Experimental Researches in Electricity. Seventh Series, Philosophical Transactions of the Royal Society of London (1776-1886), Volume 124, 01 Jan 1834, Page 77, [2] consulted 2006-12-27 (in which Faraday introduces the words electrode, anode, cathode, anion, cation, electrolyte, electrolyze)
- ^ Faraday, Michael, Experimental Researches in Electricity, Volume 1, 1849, reprint of series 1 to 14, freely accessible Gutenberg.org transcript [3] consulted 2007-01-11
For other uses, see Electrode (disambiguation). ...
Diagram of a copper cathode in a Daniells cell. ...
An anion is an ion with negative charge. ...
A cation is an ion with positive charge. ...
An electrolyte is a substance containing free ions that behaves as an electrically conductive medium. ...
In chemistry and manufacturing, electrolysis is a method of separating bonded elements and compounds by passing an electric current through them. ...
External links |
Feeds |
Contact