Austin 10
Manufacturer:	Austin Motor Company
Production:	1932-1947 290,000 made
Predecessor:	none
Successor:	Austin A40
Body style:	4 door saloon 1932-1935 "Lichfield" saloon 1934-1937 "Sherbourne" Saloon 1936-1937 "Cambridge" saloon 1937-1947 2 seat tourer 1933-1939 4 seat tourer 1933-1939 "Ripley" sports 1934-1936 "Colwyn" cabriolet 1933-1937 "Conway" cabriolet 1937-1939 van 1933-1947
Engine:	1125 cc 4 cylinder side-valve
Transmission:	4-speed manual
Wheelbase:	93 inches

1946 Austin 10 GS 1 (saloon)

The Austin 10 was a small car made by the Austin Motor Company. It was launched in 1932 and was Austin's best selling car in the 1930's and continued in production, with upgrades, until 1947. It fitted in between the "baby" Austin 7 which had been introduced in 1922 and the Austin 12 hp which had been updated in 1931. Automakers or automobile manufacturers are companies that design and manufacture automobiles. ... The Austin Motor Company was a British manufacturer of automobiles that rose to be a major motorcar brand, the dominant partner after merger with Morris in 1952 but declining after absorption into the British Leyland Motor Corporation, and its subsequent troubles. ... A number of different automobiles of the 1950s and 1960s were marketed under the A40 name by the Austin Motor Company. ... It has been suggested that this article or section be merged into Internal combustion engine. ... Image:Gearbox. ... This article or section does not cite its references or sources. ... The Austin Motor Company was a British manufacturer of automobiles that rose to be a major motorcar brand, the dominant partner after merger with Morris in 1952 but declining after absorption into the British Leyland Motor Corporation, and its subsequent troubles. ... The Austin 7 was a vintage car produced from 1922 through 1939 in the United Kingdom. ...

The design of the car was conservative with a pressed steel body built on a cross braced chassis. The chassis was bought in and was designed to give a low overall height to the car by dipping down by 2.75 inches (70 mm) between the axles. The 1125 cc four cylinder side valve engine producing 21 bhp drove the rear wheels through a four speed gearbox and open drive shaft to a live rear axle. Suspension was by half elliptic springs all round and the brakes were cable operated. The electrical system was 6 volt. For the first year only, a four door saloon was made in two versions. The basic model cost £155 and was capable of reaching 55 mph with an economy of 34 mpg; it was rapidly followed by the Sunshine or De-Luxe with opening roof and leather upholstery at £168. The cam-in-block valvetrain layouts are ones in which the camshaft is placed within the cylinder block, usually beside and slightly above the crankshaft in a straight engine or directly above the crankshaft in the V of a V engine. ...

1933 saw the saloons joined by an open two seater or "Open Road" tourer, a "Colwyn" cabriolet and a van. A sports model, the 65 mph, 30 bhp "Ripley" joined the range in 1934. Mechanical upgrades for 1934 included a stronger chassis, synchromesh on the top two gears and 12 volt electrics. Original meaning A cabriolet was a light, two-wheeled horse-drawn carriage with a folding calash top, seating two persons behind the drivers box. ... Synchromesh is the term used to describe a manual transmission in which gears are brought to the same speed during shifting by a synchronizer. ...

The first styling change came in late 1934 with a change to the radiator when the plated surround or cowl was replaced by one painted in body colour and it was given a slight slope. Synchromesh was added to second gear and "semaphore" type indicators were standardised. The saloon was given the name "Lichfield" and got a protruding boot which enclosed the spare wheel.

A new body style was added in 1936 with the six light (three windows down each side, with one behind the rear door) "Sherbourne" but the big change came in 1937 with the almost streamlined "Cambridge" saloon and "Conway" cabriolet.. Other changes included Girling rod brakes, 16 inch steel disc wheels replaced the 19 inch wires and more room for passengers by moving the engine forwards by 4 inches (100 mm). Top speed rose to 60 mph. These changes did not appear on the open cars, which no longer included the Ripley sports, until 1938 when all cars also gained an aluminium cylinder head on the engine.

A virtually new car was lauched in 1939 with the body shell incorporating the floor to give a semi-unitary structure. The car was completely restyled by Argentine born Ricardo "Dick" Burzi who had joinjed Austin from Lancia in 1929. The bonnet was hinged at the rear replacing the side opening type on the old car and the radiator grille became rounded and there was no cabriolet. In spite of the outbreak of World War 2, production of the Austin 10 continued in large numbers but there were no tourers but their was a pick-up. In all during the war 53,000 of the saloons, pick-ups and vans, the last two unofficially known as "Tillies", were made. Lancia (Lan-cha) is an Italian automobile manufacturer founded in 1906 by Vincenzo Lancia and which became part of the Fiat group in 1969. ...

With peace in 1945 a change was immediately made to civilian production but with the post-war financial crisis they were nearly all exported with the first one arriving in the United States in July 1945. The car continued in production in saloon form only until October 1947 to be replaced by the A40. The van also re-appeared post-war with a slightly larger 1237 cc engine. A number of different automobiles of the 1950s and 1960s were marketed under the A40 name by the Austin Motor Company. ...

References

• "Austin's Top Ten". Jonathan Wood. The Automobile May 1999.
• The Austin 10 Drivers club