A Brace or Brace and bit is a hand tool used to drill holes. Pressure is applied to the top and the tool is rotated with a U-shaped grip. Bit and brace photographed by me. ... // Hand tools A bit and brace, a hand-powered drill. ...

The U-shaped part is a kind of crankshaft. Crankshaft Continental engine marine crankshafts, 1942 Crankshaft is also the name of a comic strip about an old, curmudgeonly bus driver. ...

The brace is a wood removing tool

The front part of the brace consists of a chuck spindle with v-shaped brackets or clamps inside. Turning the spindle of the chuck in a clockwise direction tightens the drill bit in the chuck and turning in a counter-clockwise direction loosens the bit for removal.

Immediately behind the chuck is a three position gear release which allows ratcheting of the handle when in tight spots. Turning the gear release from the center position allows you to ratchet the brace in the direction needed. Turning the gear release fully clockwise lets it remove wood in a clockwise direction with the ratchet action going counter-clockwise. Placing the gear release fully counter-clockwise then allows you to turn the brace and bit in a counter-clockwise direction. The center position of the gear release prohibits the ratcheting effect.

The U-shaped crank has a wooden spindle on it and, along with the top spindle, is allowed to freely turn under the hands without producing wear and tear on the hands (thus, no blisters).