Brake linings are the consumable surfaces in braking systems, especially those used in vehicles. A brake is a device for slowing or stopping the motion of a machine, and to keep it from starting to move. ...

Structure and function

Brake linings are composed of a relatively soft but tough and heat-resistant material with a high coefficient of dynamic friction (and ideally an identical coefficient of static friction) typically mounted to a solid metal backing using high-temperature adhesives or rivets. The complete assembly (including lining and backing) is then often called a brake pad or brake shoe. In mathematics, a coefficient is a multiplicative factor of a certain object such as a variable (for example, the coefficients of a polynomial), a basis vector, a basis function and so on. ... Determining the Coefficient of Friction. ... An adhesive is a compound that adheres or bonds two items together. ...

In this view of an automobile disc brake, the brake pad is the black material held by the red metal component (the brake caliper). The brake lining is that part of the brake pad which actually contacts the metal rotor when the brake is engaged.

Using a typical bicycle brake as an example, the backing would be the metal shell which provides mechanical support, and the lining would be the rubbery portion which contacts the rims when the brakes are applied. In most modern vehicular applications the system is conceptually identical, except the rims would be replaced with solid steel (or sometimes exotic metal) rotors. Furthermore, a metal tang is usually incorporated into the pad assembly. The tang contacts the rotors when the linings are worn out, causing an annoying noise designed to alert the motorist that brake servicing is required. Image File history File links Download high resolution version (2260x1896, 1727 KB) Disk brake Photo on a Renault hollowed-out car at the Salon Européen de la Recherche et de lInnovation, June 5 2005 Copyright © 2005 David Monniaux File links The following pages link to this file: Disc... Image File history File links Download high resolution version (2260x1896, 1727 KB) Disk brake Photo on a Renault hollowed-out car at the Salon Européen de la Recherche et de lInnovation, June 5 2005 Copyright © 2005 David Monniaux File links The following pages link to this file: Disc... A helicopter twin-bladed main rotor, mounted on a pylon (Robinson R44) A rotor is a rotating part of a machine, as in a motor, a pump or a helicopter. ...

Since the lining is the portion of the braking system which converts the vehicle's kinetic energy into heat, the lining must be capable of surviving high temperatures without excessive wear (leading to frequent replacement) or outgassing (which causes brake fade, a decrease in the stopping power of the brake). Due to its suitability, asbestos was often a component in brake linings; as a result, brake dust should never be inhaled. Most major vehicle manufacturers have banned the use of asbestos in brake linings. Kinetic energy is energy that a body has as a result of its speed. ... In automobiles, fade, or brake fade is the reduction in stopping power caused by a buildup of heat in the brake pads and rotors. ... Fibrous asbestos on muscovite Asbestos Asbestos Asbestos (a misapplication of Latin: asbestos quicklime from Greek ἄσβεστος: a-, not; sbestos, extinguishable) describes any of a group of fibrous metamorphic minerals of the hydrous magnesium silicate variety. ...

Maintenance

When the lining is worn out, the backing or rivets will contact the rotors or drums during braking, often causing damage requiring remachining or replacement of the drums or rotors. An annoying squeal caused by the warning tang is the typical alert that the pads need to be replaced; if the squeal is ignored for too long, drum or rotor damage (usually accompanied by an unpleasant grinding sound or sensation) will be the typical result.

The lining may also become contaminated by oil or leaked brake fluid. Typical symptoms will be brake chatter, where the pads vibrate as the lining grabs and releases the rotor's surface. The solution is to repair the source of the contamination and replace the damaged pads.

In the automotive repair industry, many consumers purchase brake pads with a lifetime warranty. These pads use a much harder lining than traditional brake pads and tend to cause excessive wear of the much more expensive rotors or drums. For that reason, consumers should ensure that the new brake pads installed are those specified or supplied by the vehicle's manufacturer. Relined brake pads are usually inexpensive and perfectly acceptable, with new lining material attached to reconditioned (cleaned, inspected and painted) backing assemblies.

Brake pads must always be replaced simultaneously on both ends of a vehicle's axle, as the different lining thicknesses (and possibly material types) will cause uneven braking, making the vehicle pull in the direction of the more effective brake. For most vehicles, replacing pads (and therefore linings) is very easy, requiring a minimum of tools and time — the linings are designed to be consumable and should therefore be easy to service.

Brake linings can also be found just about everywhere there are braking systems, from elevator safety brakes to spindle brakes inside a VCR. The form and materials are frequently different, but the principle is the same.

See also: Disc brakes On automobiles, disc brakes are located within the wheel The disc brake is a device for slowing or stopping the rotation of a wheel. ...