| Bristol Type 167 Brabazon |
 Some sense of scale can be gained by looking at the size of the cockpit area and seemingly small propellers (which are in fact huge) compared to the aircraft as a whole. Note the small number of windows, and the nose probe for gust alleviation. | | Description | | Role | Airliner | | Crew | | | Passengers | 50 to 80 | | First Flight | 4 September 1949 | | Manufacturer | Bristol Aeroplane Company | | Dimensions | | Length | 177 ft | 53.95 m | | Wingspan | 230 ft | 70.1 m | | Height | 50 ft | 15.24 m | | Wing area | 5,317 ft² | 493.95 m² | | Weights | | Empty | 145,100 lb | 65,816 kg | | Maximum takeoff | 290,000 lb | 131,542 kg | | Powerplant | | Engine | 8 Bristol Centaurus | | Power | 2,650 hp | 1,864 kW | | Performance | | Maximum speed | | 483 km/h | | Cruise speed | | 402 km/h | | Range | 5,500 miles | 8,850 km | | Ceiling | | 7,620 m | The Bristol Type 167 Brabazon was a huge airliner designed by the Bristol Aeroplane Company to fly transatlantic routes from the UK to the United States. The prototype was delivered in 1949, only to prove a complete commercial failure when airlines felt the plane was too large and expensive to be useful. Despite its huge size , comparable to a Boeing 747, it was designed to carry only 60 to 80 passengers, albeit in roomy conditions not generally found on modern aircraft. In the end only one example would be built and that was broken up in 1953 for scrap, along with an uncompleted second fuselage. Bristol Brabazon File history Legend: (cur) = this is the current file, (del) = delete this old version, (rev) = revert to this old version. ...
September 4 is the 247th day of the year (248th in leap years). ...
1949 (MCMXLIX) is a common year starting on Saturday. ...
Bristol Centaurus engine The Centaurus was the ultimate development of Bristol Engine Companys series of sleeve valve radial aircraft engines, a massive 18_cylinder two_row design that eventually delivered over 3,000 hp (2. ...
An airliner is a large fixed-wing aircraft (an aeroplane/airplane) initially designed for the transport of paying passengers, and usually operated by an airline company (which owns or leases the aircraft). ...
Bristol Aeroplane Company logo The Bristol Aeroplane Company (formerly British and Colonial Aeroplane Company) was a major British aircraft company which, in 1959, merged with several major British aircraft companies, to become the British Aircraft Corporation and later still part of British Aerospace, now BAE Systems. ...
For the similarly named rock band, see TransAtlantic. ...
Singapore Airlines Boeing 747-412 The Boeing 747, commonly called the Jumbo Jet, is one of the most recognizable modern airliners and is the largest airliner currently in airline service. ...
In 1942, during World War II, the US and UK agreed to split responsibility for aircraft construction; the US would concentrate on transport aircraft while the UK would concentrate on their heavy bombers. This would leave the UK with little experience in transport construction at the end of the war, so in 1943 a committee met under the leadership of Lord Brabazon of Tara in order to investigate the future needs of the British civilian airliner market. Combatants Allies: ⢠Soviet Union, ⢠UK & Commonwealth, ⢠USA, ⢠France/Free France, ⢠China, ⢠Poland, ⢠...and others Axis: ⢠Germany, ⢠Japan, ⢠Italy, ⢠...and others Commanders Strength Casualties Full list Full list World War II, also known as the Second World War, was a large scale military conflict that took place between 1939 and 1945. ...
John Moore-Brabazon in a Voisin in 1909 John Cuthbert Moore-Brabazon, 1st Baron Brabazon of Tara (8 February 1884 - 17 May 1964) was a British aviation pioneer. ...
The Brabazon Committee delivered a report, later known as the "Brabazon Report", calling for the construction of four of five general designs they had studied. Type I was a large transatlantic airliner, Type III a smaller airliner for the empire air routes, and Type IV a jet powered 500 mph (800 km/h) airliner. The Type I and IV were considered to be very important to the industry, notably the jet powered Type IV which would give the UK a commanding lead in jet transports. In 1942, during World War II, the United States and the United Kingdom agreed to split responsibility for aircraft construction; the US would concentrate on transport aircraft while the UK would concentrate on their heavy bombers. ...
Bristol had already studied a large bomber design starting as early as 1937, and then the Air Ministry published a tender for a new super-heavy bomber design. In 1942 they dusted off their original work and updated it for their newer and much more powerful Bristol Centaurus engines. This led to a design with a range of 5,000 miles (8,000 km), 225 foot (69 m) wing span, and eight engines buried in the wings driving four pusher propellers, and enough fuel for transatlantic range. This "100 ton bomber" was in many ways the British analog to the US's Convair B-36. However the Air Ministry later changed their mind and decided to continue to pursue versions of the Avro Lancaster (leading to the Avro Lincoln) instead. The Air Ministry was formerly a department of the United Kingdom Government, established in 1918 with the responsibility of managing the affairs of the (then newly formed) Royal Air Force. ...
Bristol Centaurus engine The Centaurus was the ultimate development of Bristol Engine Companys series of sleeve valve radial aircraft engines, a massive 18_cylinder two_row design that eventually delivered over 3,000 hp (2. ...
A Convair B-36D in flight The Convair (Consolidated Vultee) B-36 was a strategic bomber operated solely by the United States Air Force. ...
The Avro Lancaster was a four-engine World War II bomber aircraft made initially by Avro for the Royal Air Force (RAF). ...
Image:Avrolincoln. ...
Only a year later the Brabazon Report was published and Bristol was able to respond with a slightly modified version of their bomber to fill the needs for the Type I requirement. Their earlier work was exactly the sort of performance the Brabazon committee was looking for, and they were given a contract for two prototype aircraft. After further work on the design a final concept was published in November 1944. It was for a 177 ft (53.9 m) fuselage with 230 ft (70.1 m) wingspan (35 ft (11 m) more than a Boeing 747) powered by eight Bristol Centaurus 18-cylinder radial engines nested in pairs in the wing. These drove eight paired counter-rotating propellors on four forward-facing nacelles. Bristol Centaurus engine The Centaurus was the ultimate development of Bristol Engine Companys series of sleeve valve radial aircraft engines, a massive 18_cylinder two_row design that eventually delivered over 3,000 hp (2. ...
Radial engine of a biplane. ...
The Brabazon Report was backward-thinking in one aspect however. When considering the people who would fly in the aircraft they designed, they thought in the context of wealthy people who were the only ones able to afford it at that point. The idea that a larger aircraft would make flying less expensive never appears to have occurred to them. Instead they assumed that the wealthy flying the plane would consider a long trip by air to be uncomfortable, and they designed the Type I for luxury, demanding 6 m³ (200 ft³) of room for every passenger, and 8 m³ (270 ft³) for luxury. This is about three times the interior room of a small car. In order to meet these requirements the Type 167 initially specified a huge 25 foot (7.6 m) diameter fuselage, which is about 5 ft (1.5 m) greater than a Boeing 747, with upper and lower decks. This enclosed sleeping berths for 80 passengers, a dining room, 37 seat movie theatre, promenade and bar; or day seats for 150 people. The Committee recommended a narrower fuselage designed for 50 passengers. BOAC agreed, but preferred a design for only 25 passengers. An agreement with the airline eventually led to an interior layout housing a forward area with six compartments, each for six passengers and a seventh for just three; a mid-section above the wing with 38 seats arranged around tables in groups of four with a pantry and galley; and a rear area with 23 seats in an aft-facing movie theatre with a cocktail bar and lounge. After technical problems with the Comet, BOAC resumed jet service with imported Boeing 707s. ...
A tremendous amount of effort was put into weight savings. The Type 167 used a number of non-standard gauges of skinning in order to tailor every panel to the strength required, thereby saving several tonnes of metal. The large span and mounting of the engines close inboard, together with structural weight economies, demanded some new measure to prevent bending of wing surfaces in turbulence. A system of gust alleviation was developed for the Brabazon, using servos triggered from a probe in the aircraft's nose. Hydraulic power units were also designed to operate the giant control surfaces. The Brabazon was the first aircraft with 100% powered flying controls, the first with electric engine controls, the first with high-pressure hydraulics, and the first with AC electrics. city lights viewed in a motion blurred exposure. ...
Building the aircraft was a challenge in itself. Bristol's factory in Filton was far too small to handle what was one of the largest aircraft in the world, and the local 2,000 ft (610 m) runway was too short to launch it. Construction of the first prototype's fuselage started in October 1945 in another hanger while a considerably larger assembly hall was built for final assembly and the runway was lengthened to 8,000 ft (2,440 m). Filton is a town in South Gloucestershire, England, on the northern outskirts of Bristol. ...
In 1946 it was decided to make the second prototype based on the Bristol Coupled Proteus turboprop engines instead of the less powerful Centaurus, increasing cruising speed from 260 to 330 mph (420 to 530 km/h) while reducing the empty weight by about 10,000 lb (4.5 t). This would be known as the Brabazon Mark II, which would be able to cross the Atlantic in a reduced time of 12 hours. Bristol Proteus engine The Proteus was the Bristol Aeroplane Companys first successful gas-turbine engine design, a turboprop that delivered just over 4,000 hp (3,000 kW). ...
A schematic diagram showing the operation of a turboprop engine. ...
The Atlantic Ocean is Earths second-largest ocean, covering approximately one_fifth of its surface. ...
The Mk.I aircraft rolled out for engine runs in December 1948, and flew for the first time on 4 September 1949. Four days later it was presented at the Farnborough Air Show before starting testing in earnest. During June 1950 she visited London's Heathrow Airport, making a number of successful takeoffs and landings, and was demonstrated at the 1951 Paris Air Show. By this point BOAC had lost any interest in the design, if it ever had any, and although some interest was shown by BEA on flying the prototype itself, various problems that would be expected of a prototype meant it never received an airworthiness certificate. September 4 is the 247th day of the year (248th in leap years). ...
This is a list of aviation-related events from 1949: Events Aerolíneas Argentinas established. ...
An Airbus A340 at Farnborough The Red Arrows in formation at Farnborough The Farnborough International Exhibition and Flying Display is an international trade fair for the aerospace business. ...
London Heathrow Airport (IATA airport code: LHR, ICAO airport code: EGLL, and often simply Heathrow) is the United Kingdoms busiest and best-connected airport. ...
The Paris Air Show (Salon International de lAéronautique et de lEspace, Paris-Le Bourget) is an international trade fair for the aerospace business. ...
For alternate usages of BEA see Bea (disambiguation) Hawker-Siddeley Trident 1C (G-ARPC), built 1962 and destroyed in a fire at London (Heathrow) Airport in 1975. ...
Wheel of Mk.II prototype in Bristol Industrial Museum By 1952 about £3.4m had been spent on development and it showed no signs of being purchased by any airline. In March the British government announced that work on the second prototype had been postponed. In October 1953, after less than 400 hours flying time, the first prototype was broken up, along with the uncompleted Mk.II prototype. All that remains are a few parts at the Bristol Industrial Museum and Scotland's Museum of Flight. File history Legend: (cur) = this is the current file, (del) = delete this old version, (rev) = revert to this old version. ...
Categories: United Kingdom-related stubs | Museum stubs | Bristol | Museums in the UK ...
The Museum of Flight is an aerospace musuem in East Lothian, Scotland, and part of the National Museums of Scotland. ...
Although considered a failure and a white elephant, the record on the Brabazon is not at all unfavourable. At least half of the money spent on the project was put into infrastructure, including the massive hangars and runway at Filton. This meant that Bristol was now in an excellent position to continue production of other designs. In addition many of the techniques developed as a part of the Brabazon project were applicable to any aircraft, not just airliners. A commercial failure is a product that does not reach expectations of success, failing to come even close. ...
A white elephant is a valuable possession whose upkeep is excessively expensive, and may be useless apart from its value to the gifter and giftee. ...
All of this was put to good use. Bristol had also won the contract for the "unimportant" Type III aircraft, which they delivered as the Bristol Britannia. Using all of the advancements of the Brabazon meant it had the best payload fraction of any aircraft up to that point, and kept that record for a number of years. Although the Britannia was delayed for a lengthy period after problems with the Type IV, the De Havilland Comet, it would go on to be a workhorse for many airlines into the 1970s. The Britannia is still considered by many to be the ultimate propeller driven airliner. The Bristol Type 175 Britannia was a medium/long-range airliner built by the Bristol Aeroplane Company in 1952 to fly a number of air routes across the British Empire. ...
In aerospace engineering, payload fraction is a common term used to characterize the efficiency of a particular design. ...
This article deals with the de Havilland Comet jet airliner. ...
External links
- The Bristol Brabazon - Engineering masterpiece or Great White Elephant
- Bristol Brabazon profile at unrealaircraft.com
| Lists of Aircraft | Aircraft manufacturers | Aircraft engines | Aircraft engine manufacturers This list of aircraft is sorted alphabetically, beginning with the name of the manufacturer (or, in certain cases, designer). ...
This is a list of aircraft manufacturers (in alphabetic order). ...
List of aircraft engines: // Piston engines Allison V-1710 Alvis Leonides Armstrong-Siddeley Puma Armstrong-Siddeley Cheetah Armstrong-Siddeley Nimbus Bentley BR1 Rotary BMW 801 Bristol Aquila Bristol Centaurus Bristol Hercules Bristol Jupiter Bristol Pegasus Bristol Perseus Bristol Phoenix Bristol Taurus Bristol Titan Bristol Hydra Bristol Mercury Clerget rotary Continental...
This is a list of aircraft engine manufacturers both past and present. ...
Airports | Airlines | Air forces | Aircraft weapons | Missiles | Timeline of aviation This is a list of airlines in operation (by continents and country). ...
This is a list of Air Forces, sorted alphabetically by country. ...
This is a list of aircraft weapons, past and present. ...
Below is a list of (links to pages on) missiles, sorted alphabetically by name. ...
This is a timeline of aviation history. ...
| |