A bus turnout, bus pullout, or bus bay is a special zone on the side of the main roadway for primarily buses to stop for a designated bus stop in order to pick up and drop off passengers. The purpose of the bus turnout is avoid blocking a lane of traffic and to improve passenger safety during boarding and deboarding. The Bus, established by Mayor Frank Fasi, is Honolulus only public transit system. ... For other meanings, see Bus stop (disambiguation). ...
Bus turnouts are most often lacking in cities with little or no usuable right-of-way for their construction. In younger cities, particularly in the United States, where there is sufficient right-of-way bus turnouts are installed on roads either as part of upgrading the road or installed by requirement of the local government during development of the lot. Right-of-way is a legal term which may have any of several meanings: priority at a crossing, or in traffic. ...
In some jurisdictions, bus turnouts can be used as an emergency turnout for the general public to prevent blocking a lane of traffic. However, should a bus attempt to enter the turnout often those using the turnout must make way.
The Bus, established by Mayor Frank Fasi, is Honolulus only public transit system. ... A lane is the area of a street or road marked by white or yellow lines, in which motorists maintain a consistent direction of travel. ... For other meanings, see Bus stop (disambiguation). ...
A busturnout may be placed on the far side or near side of an intersection, or at mid-block.
When a far side busturnout is to be provided, the alternate far side busturnout should be considered at intersections where there is a high volume of traffic making right turns that may use the busturnout as an auxiliary lane.
The bus stopping areas shall be a minimum of 50 feet in length for each standard 40 feet bus and 70 feet for every 60 feet bus expected to use the busturnout.
A location with a large number of bus stops is called a bus station, bus interchange, bus depot, or transportation center; in the case of an end destination it may be called a terminal station.
Bus stop consolidation is the process of evaluating the bus stop pattern along an established bus route and developing a new pattern for optimal bus stop placement.
Bus stop consolidation involves evaluating each bus stop and identifying critical stops, stops that could be removed or combined, and stops that could be moved for better service.
Feeds |
Contact