Qinshan Phase III Units 1 & 2, located in Zhejiang China: Two CANDU 6 reactors, designed by Atomic Energy of Canada Limited (AECL), owned and operated by the Third Qinshan Nuclear Power Company Limited. Photo courtesy of AECL. The CANDU reactor is a pressurized heavy water reactor developed initially in the late 1950s and 1960s by a partnership between Atomic Energy of Canada Limited (AECL), the Hydro-Electric Power Commission of Ontario (now known as Ontario Power Generation), Canadian General Electric (now known as GE Canada), as well as several private industry participants. The acronym "CANDU", a registered trademark of Atomic Energy of Canada Limited, stands for "CANada Deuterium Uranium". This is a reference to its deuterium-oxide (heavy water) moderator and its use of natural uranium fuel. All current power reactors in Canada are of the CANDU type. Canada markets this power reactor abroad. Image File history File links No higher resolution available. ...
Image File history File links No higher resolution available. ...
Atomic Energy of Canada Limited or AECL is a Canadian federal Crown corporation with the responsibility of managing Canadas national nuclear energy research and development program, including the advancement and support of CANDU reactor technology which was developed at AECL starting in the 1950s. ...
A pressurised heavy water reactor is a nuclear power reactor that uses unenriched natural uranium as its fuel and heavy water as a moderator (deuterium oxide D2O). ...
Atomic Energy of Canada Limited or AECL is a Canadian federal Crown corporation with the responsibility of managing Canadas national nuclear energy research and development program, including the advancement and support of CANDU reactor technology which was developed at AECL starting in the 1950s. ...
The Hydro-Electric Power Commission of Ontario was established in 1906 by the provincial Power Commission Act to build transmission lines to supply municipal utilities with electricity generated by private companies already operating at Niagara Falls. ...
Ontario Power Generation (OPG) is a public company whose shares are wholly owned by the Government of Ontario. ...
âGEâ redirects here. ...
Atomic Energy of Canada Limited or AECL is a Canadian federal Crown corporation with the responsibility of managing Canadas national nuclear energy research and development program, including the advancement and support of CANDU reactor technology which was developed at AECL starting in the 1950s. ...
Heavy water is dideuterium oxide, or D2O or 2H2O. It is chemically the same as normal water, H2O, but the hydrogen atoms are of the heavy isotope deuterium, in which the nucleus contains a neutron in addition to the proton found in the nucleus of any hydrogen atom. ...
This does not cite any references or sources. ...
Natural uranium (NU) refers to refined uranium with the same isotopic ratios as found in nature. ...
Design features
Schematic Diagram of a CANDU reactor: The primary loop is in yellow and orange, the secondary in blue and red. The cool heavy water in the calandria can be seen in pink, along with partially-inserted control rods. The CANDU reactor is conceptually similar to most other commercial reactors, although it differs in the details. Image File history File links CANDU_Reactor_Schematic. ...
Image File history File links CANDU_Reactor_Schematic. ...
A light water reactor or LWR is a thermal nuclear reactor that uses ordinary water, also called light water, as its neutron moderator. ...
Fission reactions in the reactor core heat a fluid, in this case heavy water (see below). This coolant is kept under high pressure to raise its boiling point and avoid significant steam formation in the core. The hot heavy water generated in this primary cooling loop is passed into a heat exchanger heating light water in the less-pressurized secondary cooling loop. This water turns to steam and powers a conventional turbine with a generator attached to it. Any excess heat energy in the steam after flowing through the turbine is rejected into the environment in a variety of ways, most typically into a large body of cool water, such as a lake, river or ocean. More recently-built CANDU plants, such as the Darlington Nuclear Generating Station near Toronto, Ontario, use a discharge-diffuser system that limits the thermal effects in the environment to within natural variations. A heat exchanger is a device built for efficient heat transfer from one fluid to another, whether the fluids are separated by a solid wall so that they never mix, or the fluids are directly contacted. ...
Light water, in the terminology of nuclear reactors, is ordinary water. ...
A Siemens steam turbine with the case opened. ...
Darlington Nuclear Generating Station is a Canadian electrical generating station located in Bowmanville, Ontario. ...
Template:Hide = Motto: Template:Unhide = Diversity Our Strength Image:Toronto, Ontario Location. ...
The CANDU concept incorporates a number of novel design features. At the time of its design, Canada lacked the heavy industry to cast and machine the large, heavy steel pressure vessel used in most light-water reactors. Instead, the pressure is contained in much smaller zircaloy tubes (10 cm diameter) that contain the fuel bundles. These smaller tubes are easier to fabricate than a large pressure vessel. Zircaloy, also incorrectly called zircalloy, is a group of of high-zirconium alloys. ...
Zircaloy is highly transparent to neutrons, allowing efficient transmission of fission neutrons to the moderator that surrounds the fuel channels. The moderator is a large, low-pressure, low-temperature tank of heavy water, the "calandria." The zircaloy pressure tubes, filled with fuel bundles, pass through this tank. The calandria can be made from conventional welded sheet metal. Heavy water is dideuterium oxide, or D2O or 2H2O. It is chemically the same as normal water, H2O, but the hydrogen atoms are of the heavy isotope deuterium, in which the nucleus contains a neutron in addition to the proton found in the nucleus of any hydrogen atom. ...
Calandria is the reactor core of the CANDU reactor. ...
When it was designed, Canada lacked access to uranium enrichment facilities, which were then extremely expensive to construct. The CANDU was therefore designed to use natural uranium. The CANDU design is thus popular with countries that lack enrichment plants, and are concerned that other countries might restrict the supply of enriched Uranium. Enriched uranium is uranium whose uranium-235 content has been increased through the process of isotope separation. ...
The use of natural uranium fuel is why heavy water was used as a moderator. Heavy water "wastes" (absorbs) the fewest neutrons of any moderator. Also, the low temperature of the moderator (below the boiling point of water) reduces changes in the neutrons' speeds from collisions with the moving particles of the moderator ("neutron scattering"). The neutrons therefore are easier to keep near the optimium speed to cause fissioning; they have good "spectral purity." At the same time, they are still somewhat scattered, giving an efficient range of neutron energies. The large thermal mass of the moderator provides a significant heat sink that acts as an additional safety feature. If a fuel assembly were to overheat and deform within its fuel channel, the resulting change of geometry permits high heat transfer to the cool moderator, thus preventing the breach of the fuel channel, and the possibility of a meltdown. Furthermore, because of the use of natural uranium as fuel, this reactor cannot sustain a chain reaction if its original fuel channel geometry is altered in any significant manner. CPU heat sink with fan attached A heat sink (or heatsink) is an environment or object that absorbs and dissipates heat from another object using thermal contact (either direct or radiant). ...
This diagram demonstrates the defense in depth quality of nuclear power plants. ...
Three Mile Island Nuclear Generating Station consisted of two pressurized water reactors manufactured by Babcock & Wilcox each inside its own containment building and connected cooling towers. ...
In a traditional light water reactor (LWR) design, the entire reactor core is a single large pressure vessel containing the moderator/coolant (as one fluid) and the fuel arranged in a series of long bundles running the length of the core. To refuel such a reactor, it must be shut down, the pressure dropped, the "lid" removed, and a significant fraction of the core inventory replaced in a batch procedure. A light water reactor or LWR is a thermal nuclear reactor that uses ordinary water, also called light water, as its neutron moderator. ...
To make refueling easier, the calandria-based design allows individual fuel bundles to be removed without taking the reactor off-line, improving overall duty cycle or "capacity factor". Also, the calandria is mounted horizontally. A pair of remotely-controlled fueling machines visit each end of an individual fuel string. One machine inserts new fuel while the other receives discharged fuel. In telecommunication and electronics, the term duty cycle has the following meanings: The duty cycle D is defined as the ratio between the pulse duration () and the period (T) of a rectangular waveform In a periodic phenomenon, the ratio of the duration of the phenomenon in a given period to...
The capacity factor of a power plant is the amount of electricity that it produces over a period of time, divided by the amount of electricity it could have produced if it had run at full power over that time period. ...
A lower 235U density also generally implies that less of the fuel will be "burned" before the fission rate drops too low to sustain criticality (due primarily to the relative depletion of 235U compared with the build-up of parasitic fission products). However, by avoiding the uranium enrichment process, overall utilization of mined uranium in CANDU reactors is significantly less than in light-water reactors (about 30-40% less, using current designs). Fission products are the residues of fission processes. ...
Two CANDU fuel bundles: Each about 50 cm in length and 10 cm in diameter, and generating about 1 million kWh of electricity during its time in the reactor. Photo courtesy of Atomic Energy of Canada Limited. A CANDU fuel assembly consists of a bundle of 28 or 37 half-meter long fuel rods (depending on the design): Ceramic fuel pellets in zircaloy tubes plus a support structure, with 12 bundles lying end to end in a fuel channel. The relatively new CANFLEX bundle has 43 fuel elements, with two element sizes. It is about 10 cm (four inches) in diameter, 0.5 m (20 inches) long and weighs about 20 kg (44 lb) and replaces the 37-pin standard bundle. It has been designed specifically to increase fuel performance by utilizing two different pin diameters. Image File history File links No higher resolution available. ...
Image File history File links No higher resolution available. ...
Atomic Energy of Canada Limited or AECL is a Canadian federal Crown corporation with the responsibility of managing Canadas national nuclear energy research and development program, including the advancement and support of CANDU reactor technology which was developed at AECL starting in the 1950s. ...
Nuclear power station at Leibstadt, Switzerland. ...
Fixed Partial Denture, or Bridge The word ceramic is derived from the Greek word κεÏαμικÏÏ (keramikos). ...
CANFLEX; the name is derived from its function: CANDU FLEXible fuelling, is an advanced fuel bundle design developed by Atomic Energy of Canada Ltd. ...
A number of distributed light-water compartments (Liquid Zone Controllers) help control the rate of fission. The Liquid Zone Controllers absorb excess neutrons and slow the fission reaction in their regions of the reactor core. CANDU reactors employ two independent, fast-acting safety shutdown systems. Control rods penetrate the calandria vertically and lower into the core in the case of a safety-system trip. A secondary shutdown system involves injecting high-pressure gadolinium nitrate solution directly into the low-pressure moderator.[1] A control rod is a rod made of a chemical element capable of absorbing many neutrons without decaying themselves. ...
Gadolinium nitrate is an inorganic compound of gadolinium. ...
For more information on CANDU technical details, see the CANTEACH web site
Purpose of using heavy water - See nuclear reactor physics and nuclear fission and heavy water for complete details.
The key to maintaining a nuclear reaction within a nuclear reactor is to use the neutrons being released during fission to stimulate fission in other nuclei. With careful control over the geometry and reaction rates, this can lead to a self-sustaining chain reaction, a state known as "criticality". Most nuclear reactors use a chain reaction to induce a controlled rate of nuclear fission in fissile material, releasing both energy and free neutrons. ...
An induced nuclear fission event. ...
Heavy water is dideuterium oxide, or D2O or 2H2O. It is chemically the same as normal water, H2O, but the hydrogen atoms are of the heavy isotope deuterium, in which the nucleus contains a neutron in addition to the proton found in the nucleus of any hydrogen atom. ...
In nuclear physics, a nuclear reaction is a process in which two nuclei or nuclear particles collide to produce products different from the initial particles. ...
Core of a small nuclear reactor used for research. ...
An induced nuclear fission event. ...
A schematic nuclear fission chain reaction. ...
Supercritical redirects here. ...
Natural uranium consists of a mixture of various isotopes, primarily 238U and a much smaller amount (about 0.72% by weight) of 235U. 238U can only be fissioned by neutrons that are fairly energetic, about 1 MeV or above. No amount of 238U can be made "critical", however, since it will tend to parasitically absorb more neutrons than it releases by the fission process. 235U, on the other hand, can support a self-sustained chain reaction, but due to the low natural abundance of 235U, natural uranium cannot achieve criticality by itself. For other uses, see Isotope (disambiguation). ...
There are two objects with this name: Unterseeboot 238 Uranium-238, the most common isotope of uranium This is a disambiguation page — a navigational aid which lists other pages that might otherwise share the same title. ...
Uranium-235 is an isotope of uranium that differs from the elements other common isotope, uranium-238, by its ability to cause a rapidly expanding fission chain reaction. ...
An electronvolt (symbol: eV) is the amount of energy gained by a single unbound electron when it falls through an electrostatic potential difference of one volt. ...
The "trick" to making a working reactor is to slow some of the neutrons to the point where their probability of causing nuclear fission in 235U increases to a level that permits a sustained chain reaction in the uranium as a whole. This requires the use of a neutron moderator, which absorbs some of the neutrons' kinetic energy, slowing them down to an energy comparable to the thermal energy of the moderator nuclei themselves (leading to the terminology of "thermal neutrons" and "thermal reactors"). During this slowing-down process it is beneficial to physically separate the neutrons from the uranium, since 238U nuclei have an enormous parasitic affinity for neutrons in this intermediate energy range (a reaction known as "resonance" absorption). This is a fundamental reason for designing reactors with discrete solid fuel separated by moderator, rather than employing a more homogeneous mixture of the two materials. This does not cite any references or sources. ...
The kinetic energy of an object is the extra energy which it possesses due to its motion. ...
This article does not cite its references or sources. ...
Water makes an excellent moderator. The hydrogen atoms in the water molecules are very close in mass to a single neutron and thus have a potential for high energy transfer, similar conceptually to the collision of two billiard balls. However, in addition to being a good moderator, water is also fairly effective at absorbing neutrons. Using water as a moderator will absorb enough neutrons that there will be too few left over to react with the small amount of 235U in the fuel, again precluding criticality in natural uranium. So, light water reactors require fuel with an enhanced amount of 235U in the uranium, that is, enriched uranium which generally contains between 3% and 5% 235U by weight (the waste from this process is known as depleted uranium, consisting primarily of 238U). In this enriched form there is enough 235U to react with the water-moderated neutrons to maintain criticality. A light water reactor or LWR is a thermal nuclear reactor that uses ordinary water, also called light water, as its neutron moderator. ...
These pie-graphs showing the relative proportions of uranium-238 (blue) and uranium-235 (red) at different levels of enrichment. ...
Depleted uranium storage yard. ...
One complication of this approach is the requirement to build uranium enrichment facilities which are generally expensive to build and operate. They also present a nuclear proliferation concern since the same systems used to enrich the 235U can also be used to produce much more "pure" weapons-grade material (90% or more 235U), suitable for making a nuclear bomb. Operators could reduce these issues by purchasing ready-made fuel assemblies from the reactor supplier and have the latter reprocess the spent fuel. Enriched uranium is uranium whose uranium-235 content has been increased through the process of isotope separation. ...
World map with nuclear weapons development status represented by color. ...
Weapons-grade means that a substance is pure enough to be used to make a weapon or has properties that make it suitable for weapons use. ...
The mushroom cloud of the atomic bombing of Nagasaki, Japan, in 1945 lifted nuclear fallout some 18 km (60,000 feet) above the epicenter. ...
An alternative solution to the problem is to use a moderator that does not absorb neutrons as readily as water. In this case potentially all of the neutrons being released can be moderated and used in reactions with the 235U, in which case there is enough 235U in natural uranium to sustain criticality. One such moderator is heavy water, or deuterium-oxide. Although it reacts dynamically with the neutrons in a similar fashion to light water (albeit with less energy transfer on average, given that heavy hydrogen, or deuterium, is about twice the mass of hydrogen), it already has the extra neutron that light water would normally tend to absorb. Heavy water is dideuterium oxide, or D2O or 2H2O. It is chemically the same as normal water, H2O, but the hydrogen atoms are of the heavy isotope deuterium, in which the nucleus contains a neutron in addition to the proton found in the nucleus of any hydrogen atom. ...
Deuterium, also called heavy hydrogen, is a stable isotope of hydrogen with a natural abundance in the oceans of Earth of approximately one atom in 6500 of hydrogen (~154 PPM). ...
The use of heavy water moderator is the key to the CANDU system, enabling the use of natural uranium as fuel (in the form of ceramic UO2), which means that it can be operated without expensive uranium enrichment facilities. Additionally, the mechanical arrangement of the CANDU, which places most of the moderator at lower temperatures, is particularly efficient because the resulting thermal neutrons are "more thermal" than in traditional designs, where the moderator normally runs hot. This means that the CANDU is not only able to "burn" natural uranium and other fuels, but tends to do so more effectively as well.
Fuel cycles
Range of possible CANDU fuel cycles: CANDU reactors can accept a variety of fuel types, including the used fuel from light-water reactors. Courtesy of Atomic Energy of Canada Limited. Compared with light water reactors, a heavy water design is "neutron rich". This makes the CANDU design suitable for "burning" a number of alternative nuclear fuels. To date, the fuel to gain the most attention is mixed oxide fuel (MOX). MOX is a mixture of natural uranium and plutonium, such as that extracted from former nuclear weapons. Currently there is a worldwide surplus of plutonium due to the various United States and Soviet agreements to dismantle many of their warheads, and the security of these supplies is a cause for concern. By burning this plutonium in a CANDU it is removed from use, turning it into energy. Image File history File links No higher resolution available. ...
Image File history File links No higher resolution available. ...
Atomic Energy of Canada Limited or AECL is a Canadian federal Crown corporation with the responsibility of managing Canadas national nuclear energy research and development program, including the advancement and support of CANDU reactor technology which was developed at AECL starting in the 1950s. ...
Nuclear reprocessing ...
General Name, Symbol, Number plutonium, Pu, 94 Chemical series actinides Group, Period, Block n/a, 7, f Appearance silvery white Standard atomic weight (244) g·molâ1 Electron configuration [Rn] 5f6 7s2 Electrons per shell 2, 8, 18, 32, 24, 8, 2 Physical properties Phase solid Density (near r. ...
The mushroom cloud of the atomic bombing of Nagasaki, Japan, 1945, rose some 18 kilometers (11 mi) above the hypocenter A nuclear weapon derives its destructive force from nuclear reactions of fusion or fission. ...
Plutonium can also be extracted from spent nuclear fuel reprocessing. While this consists usually of a mixture of isotopes that is not attractive for use in weapons, it can be used in a MOX formulation reducing the net amount of nuclear waste that has to be disposed of. Plutonium isn't the only fissile material in spent nuclear fuel that CANDU reactors can utilize. Because the CANDU reactor was designed to work with natural uranium, CANDU fuel can be manufactured from the used (depleted) uranium found in light water reactor (LWR) spent fuel. Typically this "Recovered Uranium" (RU) has a U-235 enrichment of around 0.9%, which makes it unusable to an LWR, but a rich source of fuel to a CANDU (natural uranium has a U-235 abundance of roughly 0.7%). It is estimated that a CANDU reactor can extract a further 30-40% energy from LWR fuel by recycling it in a CANDU reactor. A light water reactor or LWR is a thermal nuclear reactor that uses ordinary water, also called light water, as its neutron moderator. ...
Recycling of LWR fuel does not necessarily need to involve a reprocessing step. Fuel cycle tests have also included the DUPIC fuel cycle, or direct use of spent PWR fuel in CANDU, where used fuel from a pressurized water reactor is packaged into a CANDU fuel bundle with only physical reprocessing (cut into pieces) but no chemical reprocessing. Again, where light-water reactors require the reactivity associated with enriched fuel, the DUPIC fuel cycle is possible in a CANDU reactor due to the neutron economy which allows for the low reactivity of natural uranium and used enriched fuel. Pressurized water reactors (PWRs) (also VVER if of Russian design) are generation II nuclear power reactors that use ordinary water under high pressure as coolant and neutron moderator. ...
Neutron economy is defined as the ratio of an adjoint weighted average of the excess neutron production divided by an adjoint weighted average of the fission production. ...
Several Inert-Matrix Fuels have been proposed for the CANDU design, which have the ability to "burn" plutonium and other actinides from spent nuclear fuel, much more efficiently than in MOX fuel. This is due to the "inert" nature of the fuel, so-called because it lacks uranium and thus does not create plutonium at the same time as it is being consumed. The actinide series encompasses the 15 chemical elements that lie between actinium and lawrencium on the periodic table, with atomic numbers 89 - 103[1]. The actinide series is named after actinium. ...
CANDU reactors can also breed fuel from natural thorium, if uranium is unavailable. General Name, Symbol, Number thorium, Th, 90 Chemical series Actinides Group, Period, Block n/a, 7, f Appearance silvery white Standard atomic weight 232. ...
Chronology The first CANDU-type reactor was Nuclear Power Demonstration (NPD), in Rolphton, Ontario. It was intended as a proof-of-concept design, and was rated for only 22 MWe, a very low power for a commercial power reactor. It produced the first nuclear-generated electricity in Canada, and ran successfully from 1962 to 1987.[1], [2] The Nuclear Power Demonstration (or NPD) was the prototype CANDU reactor. ...
MWe and MWt are units for measuring the output of a power plant. ...
The second CANDU was the Douglas Point reactor, a more powerful version rated at roughly 200 MWe and located near Kincardine, Ontario. Douglas Point went into service in 1968, and ran until 1984. Uniquely among CANDU stations, Douglas Point incorporated an oil-filled window which offered a view of the east reactor face, even when the reactor was operating. The Douglas Point type was exported to India, and was the basis for India's fleet of domestically-designed and built 'CANDU-derivatives'. Douglas Point was originally planned to be a two-unit station, but the second unit was cancelled because of the success of the larger 515 MWe units at Pickering.[3], [4] Douglas Point was the second CANDU PHWR built, after the successful Nuclear Power Demonstrator(NPD). ...
MWe and MWt are units for measuring the output of a power plant. ...
The Municipality of Kincardine is located on the shores of Lake Huron in the County of Bruce in the province of Ontario, Canada. ...
Pickering Nuclear Generating Station is a Canadian nuclear power station located in Pickering, Ontario. ...
In parallel to the development of the classic CANDU heavy-water design, experimental CANDU variants were developed. WR-1, located at the AECL's Whiteshell Laboratories in Pinawa, Manitoba, used vertical pressure tubes and organic oil as the primary coolant. The oil used has a higher boiling point than water, allowing the reactor to operate at higher temperatures and lower pressures than a conventional reactor. This reactor operated successfully for many years, and promised a significantly higher thermal efficiency than water-cooled versions. Gentilly-1, near Trois-Rivières, Québec, was also an experimental version of CANDU, using a boiling light-water coolant and vertical pressure tubes, but was not considered successful and was closed after 7 years of fitful operation. The WR-1 reactor was a research reactor located at AECLs Whiteshell Laboratories, located near Pinawa, Manitoba. ...
Atomic Energy of Canada Limited or AECL is a Canadian federal Crown corporation with the responsibility of managing Canadas national nuclear energy research and development program, including the advancement and support of CANDU reactor technology which was developed at AECL starting in the 1950s. ...
In 1963, the Government of Canada established a AECL research laboratory in Pinawa, Manitoba, the Whiteshell Nuclear Research Establishment, now Whiteshell Laboratories. ...
Pinawa is a small Canadian community located in southeastern Manitoba, east of Winnipeg. ...
Pumpjack pumping an oil well near Lubbock, Texas Ignacy Åukasiewicz - inventor of the refining of kerosene from crude oil. ...
Gentilly Nuclear Generating Station is a Canadian nuclear power station located in Becancour, Quebec. ...
Des Forges boulevard at night. ...
The successes at NPD and Douglas Point led to the decision to construct the first multi-unit station in Pickering, Ontario. Pickering A, consisting of units 1 to 4, went into service in 1971. Pickering B, consisting of units 5 to 8, went into service in 1983, giving a full-station capacity of 4,120 MWe. The station is placed very close to the city of Toronto, in order to reduce transmission costs. Power line redirects here. ...
Pickering A was placed into voluntary lay-up in 1997, as a part of Ontario Hydro's Nuclear Improvement plan. Units 1 and 4 have since been returned to service, although not without considerable controversy regarding significant cost-overruns, especially on Unit 4. (The refurbishment of Unit 1 was essentially on-time and on-budget, accounting for delays in project startup imposed by the Ontario provincial government.) The Hydro-Electric Power Commission of Ontario was established in 1906 by the provincial Power Commission Act to build transmission lines to supply municipal utilities with electricity generated by private companies already operating at Niagara Falls. ...
In 2005, Ontario Power Generation announced that refurbishment of Units 2 and 3 at Pickering A would not be pursued, contrary to expectations. The reason for this change in plan was economic: the material condition of these units was much poorer than had existed for Units 1 and 4, particularly the condition of the steam generators, and thus the refurbishment costs would be much higher. This rendered a return-to-service of Units 2 and 3 uneconomical. A project to decommission these units is currently in the early stages of planning. Ontario Power Generation (OPG) is a public company whose shares are wholly owned by the Government of Ontario. ...
Economics The "whole idea" of the CANDU design is that the uranium does not have to be enriched, but simply formed into ceramic uranium-dioxide rods. This saves on the construction of an enrichment plant, and on the costs of processing the fuel. However, some of this potential savings is offset by the initial, one time cost of the heavy water. The heavy water required must be more than 99.75% pure[2] and tonnes of this are required to fill the calandria and the heat transfer system. The next generation reactor (the Advanced CANDU Reactor, also called the "ACR") mitigates this disadvantage by having a smaller moderator size and by using light water as a coolant. The Advanced CANDU Reactor (ACR) is an AECL Technologiesâ design and is the evolutionary development of existing CANDU reactors. ...
Since heavy water is less efficient at transferring energy from neutrons, the moderator volume (relative to fuel volume) is larger in CANDU reactors compared with light-water designs, making a CANDU reactor core generally larger than a light water reactor of the same power output. In turn, this implies higher building costs for standard features like the containment building. This is offset to some degree by the calandria-based construction, but even considering this, the CANDU tends to have higher capital costs compared with other designs. In fact, CANDU plant costs are dominated by construction costs, the price of fuel representing perhaps 10% of the cost of the power it delivers. This is true in general of nuclear plants, where the plant cost and cost of operations represent about 65% of overall lifetime cost. A containment building, in its most common usage, is a steel or concrete structure enclosing a nuclear reactor. ...
When first being offered, CANDUs offered much better "running" time statistics, the capacity factor, than light-water reactors of a similar generation. At the time, light-water (LWR) designs spent, on average, about half of their time in maintenance or refueling outages. However, since the 1980s dramatic improvements in LWR outage management have narrowed the gap between LWR and CANDU, with several LWR units achieving capacity factors in the 90% and higher range, with an overall fleet performance of 89.5% in 2005[3]. The latest-generation CANDU 6 reactors have demonstrated an 88% capacity factor, but overall fleet performance is dominated by the older Canadian units which generally report capacity factors on the order of 80%[4]. The capacity factor of a power plant is the amount of electricity that it produces over a period of time, divided by the amount of electricity it could have produced if it had run at full power over that time period. ...
Some CANDU plants suffered from cost overruns during construction, primarily due to external factors. For instance, a number of imposed construction delays led to roughly a doubling of the projected cost of the Darlington Nuclear Generating Station near Toronto, Ontario. Technical problems and redesigns added about another billion to the resulting $14.4 billion price[5] [6]. In contrast, the two CANDU 6 reactors more recently installed in China at the Qinshan site were completed on-schedule and on-budget, an achievement attributed to tight control over scope and schedule[7].
Nuclear nonproliferation In terms of safeguards against nuclear proliferation, CANDU reactors meet a similar level of international certification as other reactor designs. However, there is a common misconception that the plutonium for India's Operation Smiling Buddha nuclear test was produced in a CANDU design. In fact, the plutonium was produced in the unsafeguarded CIRUS reactor that is based on the NRX design, a Canadian research reactor design. In addition to its two CANDU reactors, India has some unsafeguarded pressurised heavy water reactors (PHWRs) based on the CANDU design, and two safeguarded light-water reactors supplied by the US. Plutonium has been extracted from the spent fuel from all of these sources in the PREFRE reprocessing facility[5]. While all of these reactors could in principle be used for plutonium production, India has a locally-designed military plutonium production reactor called Dhruva which is a scaled-up version of the CIRUS designed for plutonium production. It is this reactor which is thought to have produced the plutonium for India's more recent Operation Shakti nuclear tests.[8] World map with nuclear weapons development status represented by color. ...
The so-called Smiling Buddha was the first test fission explosion by India on May 18, 1974. ...
CIRUS (Canadian-Indian-U.S.) reactor. ...
NRX was a heavy water moderated, light water cooled, nuclear research reactor at the Canadian Chalk River Laboratories, which experienced one of the worlds first major reactor accidents 12 December 1952. ...
A pressurised heavy water reactor is a nuclear power reactor that uses unenriched natural uranium as its fuel and heavy water as a moderator (deuterium oxide D2O). ...
Dhruva in Hindu mythology was the prince blessed to eternal existence and glory as the Pole Star (Dhruva Nakshatra in Sanskrit) by Lord Vishnu. ...
Operation Shakti refers to the second round of nuclear tests conducted by India on May 11 and May 13, 1998. ...
Another concern is tritium production. Although heavy water is relatively immune to neutron capture, a small amount of the deuterium turns into tritium via this process. Tritium, when mixed with deuterium, undergoes nuclear fusion more easily than any other elemental mixture. Small amounts of tritium can be used in both the "trigger" of an A-bomb and the "fusion boost" of a boosted fission weapon. Tritium can also be used in the main fusion process of an H-bomb, but in this application it is typically generated in situ by neutron irradiation of lithium-6. Tritium (symbol T or 3H) is a radioactive isotope of hydrogen. ...
The deuterium-tritium (D-T) fusion reaction is considered the most promising for producing fusion power. ...
The mushroom cloud of the atomic bombing of Nagasaki, Japan, in 1945 lifted nuclear fallout some 18km (60,000 feet) above the epicenter. ...
Boosted fission weapons are a type of nuclear bomb that uses a small amount of fusion fuel to increase the rate, and thus yield, of a fission reaction. ...
The mushroom cloud of the atomic bombing of Nagasaki, Japan, 1945, rose some 18 km (11 mi) above the epicenter. ...
General Name, Symbol, Number lithium, Li, 3 Chemical series alkali metals Group, Period, Block 1, 2, s Appearance silvery white/gray Atomic mass 6. ...
Tritium is extracted from the CANDU plants in operation in Canada, primarily to improve safety in case of heavy-water leakage. The gas is stockpiled and used in a variety of commercial products, notably "powerless" lighting systems and medical devices. In 1985 what was then Ontario Hydro sparked controversy in Ontario due to its plans to sell tritium to the US. The plan, by law, involved sales to non-military applications only, but some speculated that even this minor penetration of the market would aid the U.S. nuclear weapon program. Demands for this supply in the future appear to outstrip production; in particular the needs of future generations of experimental fusion reactors like ITER will use up a significant amount of any potential stockpile. Currently between 1.5 and 2.1 kg of tritium are recovered yearly at the Darlington separation facility, of which a minor fraction is sold.[6]. Also try: fusion power This article is about a fictional warship in the game Halo. ...
ITER is an international tokamak (magnetic confinement fusion) research/engineering project designed to prove the scientific and technological feasibility of a full-scale fusion power reactor. ...
The 1998 Operation Shakti test series in India included one bomb of about 45 kT yield that India has publicly claimed was a hydrogen bomb. An offhand comment in the BARC publication Heavy Water - Properties, Production and Analysis appears to suggest that the tritium was extracted from the heavy water in the CANDU and PHWR reactors in commercial operation. Janes Intelligence Review quotes the Chairman of the Indian Atomic Energy Commission as admitting to the tritium extraction plant, but refusing to comment on its use [7]. It is known, however, that India possesses the indigenous technology to create tritium from the neutron-irradiation of lithium-6 in reactors, a process that is several orders of magnitude more efficient than the extraction of tritium from irradiated heavy water. Operation Shakti refers to the second round of nuclear tests conducted by India on May 11 and May 13, 1998. ...
BARC could mean In India, Bhabha Atomic Research Centre British Automobile Racing Club Brooklyn Animal Resource Coalition Birmingham Amateur Radio Club In Boston, MA, Boston Amateur Radio Club In Beltsville, MD, Beltsville Agricultural Research Center This is a disambiguation page â a navigational aid which lists pages that might otherwise share...
Active CANDU reactors Today there are 30 CANDU reactors in use around the world, and a further 13 "CANDU-derivatives" in use in India (these reactors were developed from the CANDU design after India detonated a nuclear bomb and Canada stopped nuclear dealings with India). The countries the reactors are located in are: New plants Interest continues to be expressed in new CANDU construction around the world, and CANDU technology is typically involved in open bidding processes alongside LWR technology. CANDU reactors have been proposed as the main vehicle for planned supply replacement and growth in Ontario, Canada, a province that currently generates over 50% of its electricity from CANDU reactors. Interest has also been expressed in Western Canada, where CANDU reactors are being considered as heat and electricity sources for the energy-intensive oil sands extraction process, which currently uses natural gas. Energy Alberta Corporation, headquartered in Calgary, announced August 27, 2007 that they had filed application for a license to build a new nuclear plant at Lac Cardinal (30 km west of the town of Peace River (Alberta). The application would see an initial twin AECL ACR-1000 plant go online in 2017, producing 2.2 gigawatt (electric). [9] [10] Motto: Ut Incepit Fidelis Sic Permanet (Latin: Loyal she began, loyal she remains) Capital Toronto Largest city Toronto Official languages English (de facto) Government - Lieutenant-Governor David C. Onley - Premier Dalton McGuinty (Liberal) Federal representation in Canadian Parliament - House seats 106 - Senate seats 24 Confederation July 1, 1867 (1st) Area...
This article is about the region in Canada. ...
Athabasca Oil Sands Tar sands, also referred to as oil sands, bituminous sands, or (in Venezuela) extra-heavy oil, are a mixture of sand or clay, water, and extremely heavy crude oil. ...
For other uses, see Natural gas (disambiguation). ...
Energy Alberta Corporation was created in 2005 to provide nuclear power to the energy-intensive development of the oil sands resources in northern Alberta. ...
is the 239th day of the year (240th in leap years) in the Gregorian calendar. ...
Year 2007 (MMVII) is the current year, a common year starting on Monday of the Gregorian calendar and the AD/CE era in the 21st Century. ...
The Peace River is a river in Canada which originates in the Rocky Mountains of northern British Columbia and flows through northern Alberta. ...
AECL Initialism Advanced Electronics Company Limited Association for the Elimination of Child Labour Atomic Energy of Canada Limited Australian Egg Corporation Limited This is a disambiguation page — a navigational aid which lists other pages that might otherwise share the same title. ...
2017 (MMXVII) will be a common year starting on Sunday of the Gregorian calendar. ...
The gigawatt (symbol: GW) is a unit for measuring power corresponding to one billion (109) watts. ...
Romania is in discussions for the completion of its multi-unit nuclear plant at Cernavoda, now consisting of one operating CANDU reactor and a second CANDU reactor that sustained a fission reaction for the first time on Sunday, May 6, 2007. Three more partially-completed CANDU reactors exist on the same site, part of a project discontinued at the close of the Nicolae Ceauşescu regime. Cernavodă is a city in Constanţa county, Dobruja, Romania with a population of 20,514. ...
Nicolae CeauÅescu (IPA , in English, sometimes (and erroneously) ) (January 26, 1918âDecember 25, 1989) was the leader of Romania from 1965 until December 1989. ...
Turkey has repeatedly shown interest in the CANDU reactor, but so far has chosen not to pursue nuclear energy. In the summer of 2006, Turks protested against plans for building nuclear reactors, erroneously believing that all designs are as dangerous as the RBMK (involved in the Chernobyl accident), when in fact other commercial reactor designs include fail safe features and better control giving them much better, almost perfect, safety records. [citation needed] RBMK is an acronym for the Russian reaktor bolshoy moshchnosti kanalniy (Russian: РеакÑÐ¾Ñ ÐолÑÑой ÐоÑноÑÑи ÐаналÑнÑй) which means reactor (of) high power (of the) channel (type), and describes a now obsolete class of graphite-moderated nuclear power reactor which was built only in the Soviet Union. ...
The nuclear power plant at Chernobyl prior to the completion of the sarcophagus. ...
References - ^ Canadian Nuclear FAQ. The Canadian Nuclear FAQ by Dr. Jeremy Whitlock. Retrieved on March 5, 2005. A. CANDU Nuclear Power Technology A.12 How are CANDU reactors controlled? Shutdown System 2 (SDS 2), in most CANDU designs, works by high-pressure injection of a liquid poison (gadolinium nitrate) into the low-pressure moderator.
- ^ Canadian Nuclear FAQ. The Canadian Nuclear FAQ by Dr. Jeremy Whitlock. Retrieved on March 5, 2005. A. CANDU Nuclear Power Technology A.3 What is "heavy water"? "reactor-grade" heavy water, nominally 99.75 wt% deuterium content.
- ^ US Fleet Performance
- ^ CANDU Lifetime Performance to November 30, 2001
- ^ Team CANDU, Debunking Darlington
- ^ "Can CANDU estimates be trusted?" by J.A.L. Robertson (2004)
- ^ The company SNC-Lavalin has had the best record in constructing a power plant of this size.Team CANDU, "On Budget, On Time"
- ^ Albright, David; and Mark Hibbs (September 1992). "India's Silent Bomb". Bulletin of the Atomic Scientist 48 (7): pp. 27-31.
- ^ Lac Cardinal (Alberta Index)
- ^ Lac Cardinal (CBC)
This article is about the day. ...
Year 2005 (MMV) was a common year starting on Saturday (link displays full calendar) of the Gregorian calendar. ...
This article is about the day. ...
Year 2005 (MMV) was a common year starting on Saturday (link displays full calendar) of the Gregorian calendar. ...
See also There are 18 electricity producing nuclear reactors in Canada, and another two undergoing refurbishment. ...
List of nuclear reactors is a comprehensive annotated list of all the nuclear reactors of the world, sorted by country. ...
External links |