On a bicycle, the cassette or the freewheel is the set of rear sprockets that attaches to a hub on the rear wheel. The cassette is a later development of a cogset than the freewheel. Cassettes and freewheels are not the same, but because many bicycle users do not understand the differences, the terms are often used interchangeably, incorrectly. For other uses, see Bicycle (disambiguation). ... This article does not cite its references or sources. ... A Shimano Dura-Ace freehub A freehub is a bicycle rear axle assembly that incorporates a ratcheting mechanism. ... The front wheel from a racing bicycle made using a Mavic rim A bicycle wheel is a wheel designed for a bicycle. ... Cog is a term with several meanings: A part of a gear system cog (ship), a small sailing vessel A tenon that extends all the way through another piece of wood, in joinery Cynically Ochlocratic Governments The evil robots in Toontown Online The evil robot drones of the Machine Empire...

Freewheels

Several freewheels from Shimano

A freewheel consists of the rear cogset and a ratcheting freewheel mechanism in a single replaceable assembly. Freewheels must be used with threaded hubs. The freewheel is attached to the hub by means of a right-hand thread. Traditional rear hubs had a standardized set of threads onto which a standard freewheel was screwed. This allowed many different brands of freewheels to be mounted on different brands of hubs. Unlike many cassettes, the individual sprockets in a freewheel can be removed or replaced if necessary. Most bicycles used this system of freewheels and threaded hubs until the late 1980s. [1] Image File history File links Download high resolution version (1845x1638, 652 KB) // Beschreibung Author Ralf Roletschek (User:Marcela) Description Licensing File links The following pages link to this file: Cassette (bicycle part) ... Image File history File links Download high resolution version (1845x1638, 652 KB) // Beschreibung Author Ralf Roletschek (User:Marcela) Description Licensing File links The following pages link to this file: Cassette (bicycle part) ... Shimano (OTCBB: SHMDF, FWB:SHM) is a Japanese manufacturer of cycling, fishing, snowboarding, and until 2005, golf components. ... Freewheel mechanism In mechanical or automotive engineering a freewheel is a device in a transmission that disengages the driveshaft from the driven shaft in the case that the driven shaft would rotate at a higher rpm than the driveshaft. ... A ratchet featuring a pawl (a) and a gearwheel (b) A ratchet lever hoist. ... The 1980s refers to the years of 1980 to 1989. ...

Cassettes

Over the last few years the cassette type hubs, called freehubs, have largely replaced the conventional threaded rear hub. A freehub incorporates the ratchet mechanism into the hub body. The ratchet mechanism is still replaceable on most hubs. Many users lament the loss of the brand interchangeability that existed with most freewheel systems, however, cassette systems have a major advantage in that the drive-side axle bearing can be out near the frame, rather than being back towards the center of the axle behind the freewheel. This greatly reduces the stress on the rear axle, so it does not fail as often and can be lighter. Cassettes work so well that they have become the new standard. Most quality bikes made since the late 1980s have used this greatly improved design. A Shimano Dura-Ace freehub A freehub is a bicycle rear axle assembly that incorporates a ratcheting mechanism. ... A ratchet featuring a pawl (a) and a gearwheel (b) A ratchet lever hoist. ...

Cassettes are distinguished from freewheels in that a cassette typically has a series of straight splines that form the mechanical connection between the gears and the hub. The entire cassette is retained on the hub by means of a screwdown lockring. Some cassettes systems from the late 1980s and early 1990s use a threaded small cog to hold on the larger splined cogs. Cassettes resemble freewheels, but lack a contained freewheel mechanism. Freewheel mechanism In mechanical or automotive engineering a freewheel is a device in a transmission that disengages the driveshaft from the driven shaft in the case that the driven shaft would rotate at a higher rpm than the driveshaft. ... A spline consists of a long strip of wood (a lath, not to be confused with lathe) fixed in position at a number of points. ... Spur gears found on a piece of farm equipment. ... Wikipedia does not have an article with this exact name. ...

The sprockets are commonly sold as a set, called a "cassette". The sprockets in a cassette are usually held together by three small bolts or rivets for ease of installation. These bolts or rivets are by no means necessary, they just make it easier to keep the sprockets and spacers in the correct order and position when they are removed from the ratchet body. Individual sprockets are also available. When the sprockets need to be replaced or the user wishes to replace them to change gear ratios, only the sprokets are replaced not the ratchet mechanism. This is unlike freewheels. This article does not cite its references or sources. ... Gears on a piece of farm equipment, gear ratio 1:1. ...

A 9-speed road cassette made by SRAM

Download high resolution version (768x766, 178 KB) Wikipedia does not have an article with this exact name. ... Download high resolution version (768x766, 178 KB) Wikipedia does not have an article with this exact name. ... SRAM Corporation is a bicycle component manufacturer based in Chicago, Illinois, incorporating the former bicycle division of Fichtel and Sachs, Sachs-Huret and recently acquiring Rock Shox, Avid and Truvativ, making it much more competitive against the industry giant Shimano. ...

Number and width of sprockets

Over time, the number of sprockets in a cassette has increased, to seven to eight, then nine, and now ten for racing bicycle groupsets. Up to eight speed, the spacing between sprockets was decreased and the rear spacing of the frame slightly increased to accommodate the greater number. With nine speed, the sprockets were made thinner, and thinner still for ten speed. Because of the thinner sprockets, a thinner chain should also be used. An aluminum racing bicycle made by Raleigh and built using Shimano components. ... A groupset is a bicycle component manufacturers organized collection of mechanical parts. ...

Shimano Hyperglide

In Hyperglide cassettes, the individual teeth on a sprocket are differently shaped, so that the chain can momentarily engage two gears during shifting. The exact shape of each tooth is designed by computer taking into account the position of nearby teeth on adjacent sprockets. Shifting with this system is faster and quieter.

All modern Shimano cassettes are Hyperglide, and have model names such as CS-HG50 and CS-HG70 to reflect this.

External references

• Sheldon Brown's webpage on freehubs and cassettes
• Sheldon Brown's webpage of the differences between freewheels and cassette systems
• Sheldon Brown's webpage on freewheels
• Park Tools webpage containing basic freewheel & freehub repair info
• How to change a bicycle cassette