The United States chemical mortar battalions were army units attached to U.S. Infantry divisions, and it was their responsibility to service the 4.2 in (107 mm) chemical mortar during World War II. For this reason they were also called the "Four-deucers". This article needs to be cleaned up to conform to a higher standard of quality. ... A division is a large military unit or formation usually consisting of around ten to fifteen thousand soldiers. ... World War II was a truly global conflict with many facets: Immense human sacrifice, fierce indoctrinations, and the use of new, extremely devastating weapons - the atom bomb being the ultimate. ...

Chemical mortar battalions

A typical chemical mortar battalion had an establishment of 37 officers, 138 NCOs, and 481 junior enlisted men. It consisted of:

• 1 chemical mortar battalion HQ company
  • 1 company HQ section
  • 1 battalion HQ section
  • 1 maintenance section
  • 3 ammo sections
• 3 chemical mortar companies.

A chemical mortar company usually had an establishment of 9 officers, 40 NCOs, and 118 junior enlisted men. It consisted of:

• 1 mortar company HQ section
• 3 mortar platoons

A mortar platoon consisted of:

• 1 platoon HQ
• 4 squads each of which had 1 Squad leader (Sgt), 1 Gunner (Cpl), 3 Ammo Bearers (Jr. EM), 2 Truck drivers (Jr. EM), 1 Asst. Gunner (Jr. EM)

The numbers of the battalions

During World War II, there were a total of 25 chemical mortar battalions:

• the 2nd and 3rd Battalions
• the 71st and 72nd Battalions
• the 80th through the 100th Battalions.

The 443rd, 483rd, 534th, 537th, 560th, 781st, and 782nd Battalions, although formed during the war, were activated too late to serve overseas. Most battalions, however, were active during the Korean War. The Korean War (Korean: 한국전쟁/韓國戰爭), from June 25, 1950 to July 27, 1953, was a conflict between North Korea and South Korea. ...

After the war, the U. S. War Department transferred the operations and development of chemical mortars to the Ordnance Department, in this way making the mortar an actual infantry weapon. War Department may refer to the military establishments of several different countries: British War Department Confederate War Department United States Department of War, under the leadership of the United States Secretary of War (until 1947) See also: defense minister This is a disambiguation page — a navigational aid which lists other...

What are chemical mortars?

Chemical mortars are so named because of their capability of firing not only high explosive, but also chemical, gas, incendiary, and smoke marker shells. Chemical shells were on stand-by during World War II, to be used if enemy first-strike employment of chemical weapons demanded their application as a retaliatory means of action. This article is concerned solely with chemical explosives. ... A chemical substance is any material substance used in or obtained by a process in chemistry: A chemical compound is a substance consisting of two or more chemical elements that are chemically combined in fixed proportions. ... Gas (actually, as), the GNU assembler, is the default GCC back-end. ... An incendiary device is a device or weapon designed to create a fire. ... Smoke is a suspension in air of small particles resulting from incomplete combustion of a fuel. ... A shell is a projectile, which, as opposed to a bullet, is not solid but contains an explosive or other filling, though modern usage includes large projectiles without a filling. ... Dressing the wounded during a gas attack by Austin O. Spare, 1918. ...

These same mortars, using high-explosive shells, came to be acknowledged by the U.S. Army command and army personnel as being one of the most effective means of striking at stationary targets, such as machine gun nests, prepared strong points, pillboxes, or even the powerful German 88 mm guns. Another advantage chemical mortars offered, was their manoeuvrability, easy assembly, disassembly and reassembly from one location to another. The mortars were able to fire high-explosive shells from behind relatively concealed positions, such as natural escarpments on hillsides, or from woods. As their reputation of their devastating accuracy was spreading, the fluttering sound of a shell in transit, followed immediately by the huge thump of the explosion, tended to create panic among enemy forces who were subjected to their firepower. Soldier Firing the M224 60mm Mortar. ... A machine gun is a fully-automatic firearm that is capable of firing bullets in rapid succession. ... A bunker is a defensive warfare fortification to protect oneself. ... German 8. ...

The development and capabilities of the chemical mortar

The 4.2 in (107 mm) chemical mortar was developed from the British World War 1 Stokes mortar that in its turn had evolved to prevail against the random effect of the gas clouds that in adverse weather would affect friend and foe alike with sometimes disastrous results in the trench-warfare conditions at the time. Ypres, 1917, in the vicinity of the Battle of Passchendaele. ...

A Stokes mortar could fire twenty shells a minute and had a range of 1100 yards (1001 m) and in this way was capable of overwhelming enemy trenches. The 4.2 in (107 mm) mortar, that had by then a rifled barrel installed, and was firing shells with fins attached, had a range of 2300 yards by 1924. After modifying the bore, improving the two-legged support and the recoil mechanism, and producing barrels made of seamless nickel, the M1A1 model was capable of sending shells 2400 yards (2195 m) during the 1930s.
By 1942, after authorization had been sought and granted to use high explosive shells, again stronger barrels were being built into the new M2 model.
1924 was a leap year starting on Tuesday (link will take you to calendar). ... General Name, Symbol, Number nickel, Ni, 28 Chemical series transition metals Group, Period, Block 10, 4, d Appearance lustrous, metallic Atomic mass 58. ... 1930 is a common year starting on Wednesday. ... This article is about the year. ...

When the mortar was adopted by the battalions

In 1943, the mortar was adopted by the chemical mortar battalions. Later, it was developed to be capable of instantly firing shells from a mere 565 yards (517 m) at minimum propellant charge, to a range of 4400 yards (4023 m) by having propellant-charge disks of powder added that by then were being manufactured as square disks with a hole in the middle, strung together, fitted into cartridges, and sewn together into bundles of various thickness. Its rate of fire was 40 rounds in the first two minutes, 100 rounds in the first 20 minutes, and at sustained fire 80 rounds per hour. These variations were caused by the stresses and strains on barrels and the rest of firing mechanisms, that were being imposed by different firing conditions. 1943 is a common year starting on Friday. ... Rimmed, centerfire . ...

The mortars were transported in mortar carts, jeeps, in island engagements in the Pacific by boat, and in difficult terrain by mule. Jeep is an automobile marque of DaimlerChrysler. ... For other meanings of Pacific, see Pacific (disambiguation). ... In its common modern meaning, a mule is the offspring of a male donkey and a female horse. ...

During the Allied attack on Sicily in the summer of 1943 - the first time the mortar had been used in war-time - 35,000 rounds of HE shells were fired in 38 days. In general, allies are people or groups that have joined an alliance and are working together to achieve some common purpose. ... Sicily (Sicilia in Italian) is an autonomous region of Italy and the largest island in the Mediterranean Sea, with an area of 25,700 sq. ...

See also

• Mortar (weapon)

Soldier Firing the M224 60mm Mortar. ...

External links

• Chemical mortar battalion organization

• M2 4.2 in (107 mm) mortar specification

• The history of the battalions