In telecommunications, connectionless describes communication between two network end points in which a message can be sent from one end point to another without prior arrangement. The device at one end of the communication transmits data to the other, without first ensuring that the recipient is available and ready to receive the data. The device sending a message simply sends it addressed to the intended recipient. If there are problems with the transmission, it may be necessary to resend the data several times. The Internet Protocol (IP) and User Datagram Protocol (UDP) are connectionless protocols. BlackBerry 7100t Telecommunication refers to communication over long distances. ... The Internet Protocol (IP) is a data-oriented protocol used by source and destination hosts for communicating data across a packet-switched internetwork. ... The User Datagram Protocol (UDP) is one of the core protocols of the Internet protocol suite. ...
Connectionless protocols are usually described as stateless because the endpoints have no protocol-defined way to remember where they are in a "conversation" of message exchanges. The alternative to the connectionless approach uses connection-oriented protocols, which are sometimes described as stateful because they can keep track of a conversation.
See also
Connection-oriented protocol
vffdvbfgv bd In telecommunications, connection-oriented describes a means of transmitting data in which the devices at the end points use a preliminary protocol to establish an end-to-end connection before any data is sent. ...
RFC 926 December 1984 During the composition of the PDU, a value of the total length of the PDU is determined by the originator and placed in the Total Length field of the PDU header.
The address of the originator of the Data Protocol Data Unit is RFC 926 December 1984 conveyed as both the destination address of the Error Report PDU as well as the source address of the original Data PDU; the latter is contained in the Data field of the Error Report PDU.
In particular, the first inserted octet is interpreted as the network layer protocol identifier, probably eliminating any knowledge that the data unit is related to the RFC 926 December 1984 ISO 8473 Protocol, and thereby eliminating any attempt to perform the checksum calculation or invoking a different form of checksum calculation.