|
Constant false alarm rate (CFAR) detection refers to a common form of adaptive algorithm used in radar systems to detect target returns against a background of noise, clutter and interference. This long range RADAR antenna, known as ALTAIR, is used to detect and track space objects in conjunction with ABM testing at the Ronald Reagan Test Site on the Kwajalein atoll[1]. RADAR is a system that uses radio waves to detect, determine the direction and distance and/or speed...
Radio noise If there was no noise picked up with radio signals, then tiny transmitters could be received at any distance just by making a radio receiver that was sensitive enough. ...
Cluttering is a communicative disorder that involves short attention span, inability to listen, and difficulties with syntax. ...
Principle In a radar detector, the system must determine a power threshold above which any return is considered to be from a target. If this threshold is low, then more targets will be detected at the expense of increased numbers of false alarms. Conversely, if the threshold is high, then fewer targets will be detected, but the number of false alarms will also be low. In most radar detectors, the threshold is set in order to achieve a certain level of false alarm.
If the background against which targets are to be detected is constant with time and space, then a fixed threshold level can be chosen that provides a specified probability of false alarm, governed by the probability density function of the noise, which is usually assumed to be Gaussian. The probability of detection is then a function of the signal-to-noise ratio of the target return. However, in most fielded systems, unwanted clutter and interference sources mean that the noise level changes both spatially and temporally. In this case, a changing threshold can be used, where the threshold level is raised and lowered to maintain a constant probability of false alarm. This is known as constant false alarm rate (CFAR) detection. In mathematics, a probability density function (pdf) serves to represent a probability distribution in terms of integrals. ...
In communications, the additive white Gaussian noise (AWGN) channel model is one in which the only impairment is the linear addition of wideband or white noise with a constant spectral density (expressed as watts per hertz of bandwidth) and a Gaussian distribution of amplitude. ...
Signal-to-noise ratio (often abbreviated SNR or S/N) is meaningful both in the context of Electrical engineering and, informally, for Usenet or other newsgroup-like services. ...
Cell averaging CFAR In most simple CFAR detection schemes, the threshold level is calculated by estimating the level of the noise floor around the cell under test (CUT). This can be found by taking a block of cells around the CUT and calculating the average power level. To avoid corrupting this estimate with power from the CUT itself, cells immediately adjacent to the CUT are normally ignored (and referred to as "guard cells"). A target is declared present in the CUT if it is both greater than all its adjacent cells and greater than the local average power level. The estimate of the local power level may sometimes be increased slightly to allow for the limited sample size. This simple approach is called a cell-averaging CFAR (CA-CFAR).
Other related approaches calculate separate averages for the cells to the left and right of the CUT, and then use the greatest-of or least-of these two power levels to define the local power level. These are referred to as greatest-of CFAR (GO-CFAR) and least-of CFAR (LO-CFAR) respectively, and can improve detection when immediately adjacent to areas of clutter.
Sophisticated CFAR approaches More sophisticated CFAR algorithms can adaptively select a threshold level by taking a rigorous account of the statistics of the background in which targets are to be detected. This is particularly common in maritime surveillance applications, where the background of sea clutter is particularly spikey and not well approximated by additive white Gaussian noise. This is a difficult detection problem, as it is difficult to differentiate between spikes due to the sea surface returns and spikes due to valid returns from, for example, submarine periscopes. The K distribution is a popular distribution for modelling sea clutter characteristics. In communications, the additive white Gaussian noise (AWGN) channel model is one in which the only impairment is the linear addition of wideband or white noise with a constant spectral density (expressed as watts per hertz of bandwidth) and a Gaussian distribution of amplitude. ...
German UC-1 class World War I submarine A model of Gunter Priens Unterseeboot 47 (U-47), German WWII Type VII diesel-electric hunter-killer (SSK) submarine Inside of the Argonaute, showing the typical obstructed, tiny space of a post-WWII diesel attack submarine. ...
Diagram of periscope. ...
See also |
Feeds |
Contact