A dripperline refers to a type of drip irrigationtubing with emitters pre-installed at the factory. A dripper Drip irrigation, invented and first used in Israel, is an irrigation method that applies water slowly to the roots of plants, by depositing the water either on the soil surface or directly to the root zone. ... Tubing refers to a flexible hose or pipe used in plumbing, irrigation, and other industries. ... An emitter is any device used to emit any signal, beacon, light, odor, liquid, fragrance, or the like. ...
If the dripperline lengths of run are long (over 600 feet), higher than operational inlet pressures may be required to achieve adequate flushing velocities (between 1.25 and 2.0 feet per second (fps) is usually adequate).
In many areas, dripperline applications are operated with hot water due to the temperature of the water source, or heating of the water for surface laid dripperline.
In dripperline applications, it is especially bothersome when seamed tapes leak at the fitting, which often occurs due to the non-regular shape of the inner and outer diameter.
Drip tape is a type of thin walled dripperline used in drip irrigation.
The first drip tape, a product known as "Dew Hose", was developed in Watertown, New York, in the 1960's by Richard D. Chapin.
Some of these manufacturers claim that their product is not a tape, but a thin walled dripperline, but in popular parlance, both types of products are called tapes.
Feeds |
Contact