Embedded microprocessors are essentially microprocessors that are used in everyday electronic devices, such as cellular telephones, household appliances, automobiles, or virtually any electronic device you could think of. Unlike microprocessors, which are usually used in computer systems, embedded microprocessors are usually designed to perform a certain task and the user seldom has to interact with it. Wikipedia does not have an article with this exact name. ... It has been suggested that this article or section be merged with embedded microprocessor. ... Microprocessors, including an Intel 80486DX2 and an Intel 80386 A microprocessor (abbreviated as µP or uP) is an electronic computer central processing unit (CPU) made from miniaturized transistors and other circuit elements on a single semiconductor integrated circuit (IC) (aka microchip or just chip). ... Microprocessors, including an Intel 80486DX2 and an Intel 80386 A microprocessor (abbreviated as µP or uP) is an electronic computer central processing unit (CPU) made from miniaturized transistors and other circuit elements on a single semiconductor integrated circuit (IC) (aka microchip or just chip). ... A computer system is a set of hardware and software which processes data in a meaningful way. ...

Although not seen, embedded microprocessors are all around us. It is estimated that in 1997, there were about 30 million microprocessor chips built for personal computer use, while there were around 3 billion built for embedded purposes.[1]

Characteristics of Embedded Microprocessors

Embedded microprocessors, although similar to normal microprocessors, require little to no human interaction. This eliminates the need for a human "supervisor." The embedded microprocessor relies on the stored programs and data being sent to and from the microprocessor to control it's behavior. Microprocessors, including an Intel 80486DX2 and an Intel 80386 A microprocessor (abbreviated as µP or uP) is an electronic computer central processing unit (CPU) made from miniaturized transistors and other circuit elements on a single semiconductor integrated circuit (IC) (aka microchip or just chip). ... A microprocessor is a programmable digital electronic component that incorporates the functions of a central processing unit (CPU) on a single semiconducting integrated circuit (IC). ...

Interrupts

Embedded microprocessors interact with their environments through an interrupt system. Interrupts are electronic signals sent from external devices that let the processor know that they are done retrieving some data, or converting a signal, or whenever they need to use the processor. The processor then enters its interrupt handler (which is usually just another program) and decodes the source of the interrupt to take the correct action. In computing, an interrupt is an asynchronous signal from hardware or software indicating the need for attention. ...

Programs

Like any computer, the programs are stored in memory. Since we are dealing with an embedded system, memory is an important issue. Keeping in trend with the miniaturization of electronics, this leaves the embedded microprocessor without large amounts of available memory. This isn't too big an issue, however, since the programs run by embedded microprocessors are usually fairly short and straightforward. So these small programs can fit onto memory built onto the chip that the processor is on. A BlueGene supercomputer cabinet. ... It has been suggested that Embedded System Design in an FPGA be merged into this article or section. ...

Other Common Microprocessor Features

Aside from the memory and interrupt system, embedded processors also use a variety of other devices which are built onto the chip as well. Since embedded processors are usually used to control devices, they sometimes need to accept input from the device they are controlling. This is the purpose of the analog to digital converter. Since processors are built to interpret and process digital data, i.e. 1's and 0's, they won't be able to do anything with the analog signals that may be being sent to it by a device. So the analog to digital converter is used to convert the incoming data into a form that the processor can recognize. There is also a digital to analog converter that allows the processor to send data to the device it is controlling. This article or section should include material from AD converters In electronics, an analog-to-digital converter (abbreviated ADC, A/D, or A to D) is a device that converts continuous signals to discrete digital numbers. ... This article or section should include material from AD converters In electronics, an analog-to-digital converter (abbreviated ADC, A/D, or A to D) is a device that converts continuous signals to discrete digital numbers. ... In electronics, a digital-to-analog converter (DAC or D-to-A) is a device for converting a digital (usually binary) code to an analogue signal (current, voltage or charges). ...

In addition to the converters, many embedded microprocessors include a variety of timers as well. One of the most common types of timers is the Programmable Interval Timer, or PIT for short. A PIT just counts down from some value to zero. Once it reaches zero, it sends an interrupt to the processor indicating that it has finished counting. This is useful for things such as thermostats, which periodically test the temperature around them to see if they need to turn the air conditioner on, the heater on, etc. A Programmable Interval Timer (PIT) provides one or more counters which trigger an interrupt when they reach their programmed count. ...

Another feature is the time processing unit or TPU for short. It is essentially just another timer, but more sophisticated. In addition to counting down, the TPU can detect input events, generate output events, and other useful operations that are beyond the scope of this discussion.

Embedded Microprocessors vs. General Microprocessors

Although embedded microprocessors are similar to regular processors used in computers, there are some differences that will be discussed below. The tower of a personal computer. ...

Speed Issues

Computers need to be very fast. Well, they don't "need" to be, but computer users don't want to sit there and wait for the computer to finish. It should be instantaneous to the user. With embedded processors, speed isn't so much of an issue (unless it's controlling something like anti-lock brakes on a car, or anything where people could get hurt). Since the embedded processor usually never interacts with people, it doesn't need to be lightning fast. The tower of a personal computer. ... A BlueGene supercomputer cabinet. ... A BlueGene supercomputer cabinet. ...

Instruction Sets

Computers generally have rather large instruction sets (the instructions that the processor actually executes). They are very general instructions, such as load data from memory to a register, or perform additions, logical operations, or save data from a register to memory. For embedded systems, the instruction set isn't so large, so they generally have instructions that are only useful to the application it is designed for. Including all the other unnecessary instructions would lead to increased size and cost. The tower of a personal computer. ... It has been suggested that some sections of this article be split into a new article entitled instruction set architecture. ... Register or registration may mean: Registration (or licensing) is required of a number of occupations and professions where maintenance of standards is required to protect public safety. ... Register or registration may mean: Registration (or licensing) is required of a number of occupations and professions where maintenance of standards is required to protect public safety. ...

References

• http://www.cheshirehenbury.com/embedded