A fire-control radar is a radar which is designed specifically to provide information (mainly target azimuth, elevation, range and velocity) to a fire-control system in order to calculate a firing solution (i.e. information on how to direct weapons such that they hit the target(s)). Such radars typically emit a narrow, intense beam of radio waves to ensure accurate tracking information and to minimise the chance of losing track of the target. Some modern radars have a track-while-scan capability enabling it to function simultaneously as a fire-control radar and a search radar. This works either by having the radar switch between sweeping the search sector and sending directed pulses at the target to be tracked, or by using a phased-array antenna to generate two (or more) discrete radar beams and dividing them between both tasks. This long range radar antenna (approximately 40m (130ft) in diameter) rotates on a track to observe activities near the horizon. ... A fire-control system is a computer, often mechanical, which is designed to assist a weapon system in hitting its target. ... Radio frequency, or RF, refers to that portion of the electromagnetic spectrum in which electromagnetic waves can be generated by alternating current fed to an antenna. ... A giant phased-array radar in Alaska In telecommunication, a phased array is a group of antennas in which the relative phases of the respective signals feeding the antennas are varied in such a way that the effective radiation pattern of the array is reinforced in a desired direction and...

Fire-control radars operate in three different phases:

-Designation phase, the fire-control radar must be directed to the general location of the target due to the radar’s narrow beamwidth.

-Acquisition phase, the fire-control radar switches to the acquisition phase of operation once the radar is in the general vicinity of the target. During this phase, the radar system searches in the designated area in a predetermined search pattern until the target is located or redesignated.

-Track phase, the fire-control radar enters into the track phase when the target is located. The radar system locks onto the target during this phase.

The performance of a fire-control radar is determined by primarily by two factors, radar resolution and atmospheric conditions. Radar resolution is the ability of the radar to differentiate between two targets closely located. The first, and most problematic, is gaining high range resolution. To do this in a basic fire-control radar system, it must operate at a high pulse repetition frequency and have a high receiver sensitivity. Bearing resolution is typically ensured by using a narrow (one or two degree) beamwidth. Atmospheric conditions, such as moisture lapse, temperature inversion, and dust particles affect radar performance as well. Moisture lapse and temperature inversion often times cause ducting, in which RF energy is bent as it passes through hot and cold layers. This can either extend or reduce the radar horizon, depending on which way the RF is bent. Dust particles, as well as water droplets, cause attenuation of the RF energy, translating into a loss of effective range. In both cases, a lower pulse repetition frequency makes the radar less susceptible to atmospheric conditions.

Examples of fire-control radars currently in use by the United States Navy: The United States Navy (USN) is the branch of the United States armed forces responsible for naval operations. ...

-Mk 95 Continuous Wave Illuminator (NATO Seasparrow Surface Missile System)

-Mk 92 Combined Antenna System (Mk 75 Gun, formerly SM-1 missiles)

-SPG-62 Continuous Wave Illuminator (AEGIS)

-SPQ-9B Pulse Doppler (Mk 45 Lightweight Gun)

Information taken from: US Navy, FIRE CONTROLMAN, VOLUME 02--FIRE CONTROL RADAR FUNDAMENTALS (Revised)

See also: Fire-control system A fire-control system is a computer, often mechanical, which is designed to assist a weapon system in hitting its target. ...