Close coupled cistern type flushing toilet.

A flush toilet or Water Closet (WC) is a toilet that disposes of human waste by using water to flush it through a drainpipe to another location. Modern toilets incorporate an 'S' bend; this 'trap' creates a water seal which remains filled the 'S' bend also provides siphon action which helps accelerate the flushing process. Water filling up the bowl creates a high pressure area which forces the water past the S bend. At the S bend when water starts to move it creates a vacuum that pulls the water and waste out of the toilet. When no more water is left then the air stops the siphon or vacuum process. At that point the water that is going into the bowl continues to fill up the bowl to equalize the bowl and the S bend. This ends the cycle of one flush. However, since this type of toilet does not generally handle waste on site, separate waste treatment systems must be built. Image File history File links Emblem-important. ... Image File history File links Image of a commode poo File history Legend: (cur) = this is the current file, (del) = delete this old version, (rev) = revert to this old version. ... Image File history File links Image of a commode poo File history Legend: (cur) = this is the current file, (del) = delete this old version, (rev) = revert to this old version. ... // Getting water out of a cistern A cistern (Middle English cisterne, from Latin cisterna, from cista, box, from Greek kistê, basket) is a receptacle for holding liquids, usually water. ... For other uses, see Toilet (disambiguation). ... Not to be confused with Psiphon. ... Waste treatment refers to the activities required to ensure that waste has the least practicable impact on the environment. ...

Invention timeline

Further information: History of toilets

Toilet with elevated cistern and chain attached to lever of discharge valve.

As with many inventions, the flush toilet did not suddenly spring into existence, but was the result of a long chain of minor improvements. Therefore, instead of a single name and date, there follows a list of significant contributors to the history of the device. Image File history File linksMetadata Download high-resolution version (1200x1600, 225 KB) Author: Gregorydavid 20:13, 10 January 2007 (UTC) I, the creator of this work, hereby grant the permission to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1. ... Image File history File linksMetadata Download high-resolution version (1200x1600, 225 KB) Author: Gregorydavid 20:13, 10 January 2007 (UTC) I, the creator of this work, hereby grant the permission to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1. ... // Getting water out of a cistern A cistern (Middle English cisterne, from Latin cisterna, from cista, box, from Greek kistê, basket) is a receptacle for holding liquids, usually water. ... A broad metal chain made of torus-shaped links. ...

• circa 30th century BC: A primitive dual channel, fresh water and waste, toilet system was in use in the houses at Skara Brae, Orkney, Scotland
• circa 26th century BC: Flush toilets were first used in the Indus Valley Civilization. The cities of Harappa and Mohenjo-daro had a flush toilet in almost every house, attached to a sophisticated sewage system. ^[1]
• circa 18th century BC: Flush toilet constructed at Knossos on Minoan Crete^[2]
• circa 15th century BC: Flush toilets used in the Minoan city of Akrotiri.
• 1st to 5th centuries AD: Flush toilets were used throughout the Roman Empire. Some examples include those at Vindolanda on Hadrian's Wall in Britain. With the fall of the Roman Empire, the technology was lost in the West.
• 1596: Sir John Harington is said to have invented 'The Ajax', a forerunner to the modern flush toilet, for Elizabeth I of England, who wouldn't use the contraption because it made too much noise. His design was ridiculed in England, but was adopted in France under the name Angrez. The design had a flush valve to let water out of the tank, and a wash-down design to empty the bowl.
• 1738: A valve-type flush toilet was invented by J. F. Brondel.
• 1775: Alexander Cummings invented the S-trap (British patent no. 814?), still in use today, which uses standing water to seal the outlet of the bowl, preventing the escape of foul air from the sewer. His design had a sliding valve in the bowl outlet above the trap.
• 1777: Samuel Prosser invented and patented the 'plunger closet'.
• 1778: Joseph Bramah invented a hinged valve or 'crank valve' that sealed the bottom of the bowl, and a float valve system for the flush tank. His design was used mainly on boats.
• 1819: Albert Giblin received British patent 4990 for the "Silent Valveless Water Waste Preventer", a siphon discharge system.
• 1852: J. G. Jennings invented a wash-out design with a shallow pan emptying into an S-trap.
• 1857: The first American patent for a toilet, the 'plunger closet', was granted.
• 1860: The first watercloset installed on the European continent was imported from England. It was installed in the rooms of Queen Victoria in castle Ehrenburg (Coburg, Germany); she was the only one who was allowed to use it.
• The first popularized water closets were exhibited at The Crystal Palace and these became the first public toilets. They had attendants dressed in white and customers were charged a penny for use. This is the origin of the phrase "To spend a penny".
• 1880s: Thomas Crapper's plumbing company built flush toilets of Giblin's design. After the company received a royal warrant, Crapper's name became synonymous with flush toilets. Although he was not the original inventor, Crapper popularized the siphon system for emptying the tank, replacing the earlier floating valve system which was prone to leaks. Some of Crapper's designs were made by Thomas Twyford. The similarity between Crapper's name and the much older word crap is merely a coincidence.
• 1885: Thomas Twyford built the first one-piece china toilet using the flush-out siphon design by J. G. Jennings.
• 1886: An early jet flush toilet was manufactured by the Beaufort Works in Chelsea, England.
• 1906: William Elvis Sloan invents the Flushometer, which uses pressurized water directly from the supply line for faster recycle time between flushes. The original Royal Flushometer is still in use today in public restrooms worldwide.
• 1980: Bruce Thompson, working for Caroma in Australia, developed the Duoset cistern with two buttons and two flush volumes as a water-saving measure. Modern versions of the Duoset are now available in more than 30 countries worldwide, and save the average household 67% of their normal water usage.^[3]

For the music group, see Skara Brae (music). ... Location Geography Area Ranked 16th  - Total 990 km²  - % Water  ? Admin HQ Kirkwall ISO 3166-2 GB-ORK ONS code 00RA Demographics Population Ranked 32nd  - Total (2006) 19,800  - Density 20 / km² Scottish Gaelic  - Total () {{{Scottish council Gaelic Speakers}}} Politics Orkney Islands Council http://www. ... This article is about the country. ... Excavated ruins of Mohenjo-daro. ... Location of Harappa in the Indus Valley. ... Mohenjo-daro (literally, mound of the dead), like Harappa, was a city of the Indus Valley civilization. ... Urban areas require some method for collection and disposal of sewage. ... A portion of Arthur Evans reconstruction of the Minoan palace at Knossos. ... Minoan may refer to the following: The Minoan civilization The (undeciphered) Eteocretan language The (undeciphered) Minoan language The script known as Linear A An old name for the Mycenean language before it was deciphered and discovered to be a form of Greek. ... For other uses, see Crete (disambiguation). ... Minoan may refer to the following: The Minoan civilization The (undeciphered) Eteocretan language The (undeciphered) Minoan language The script known as Linear A An old name for the Mycenean language before it was deciphered and discovered to be a form of Greek. ... Map of Akrotiri (Western) SBA Akrotiri (also known as the Western Sovereign Base Area or WSBA) and Dhekelia (also known as the Eastern Sovereign Base Area or ESBA) are UK Sovereign Base Areas (SBAs) in Cyprus, a former British Crown Colony. ... For other uses, see Roman Empire (disambiguation). ... Vindolanda was a Roman auxiliary fort located at Chesterholm, just south of Hadrians Wall in northern England, near the border with Scotland, guarding the Roman road from the River Tyne, to the Solway Firth, now known as the Stanegate. ... Hadrians Wall is a stone and turf fortification built by the Roman Empire across the width of modern-day England. ... Sir John Harington, 2nd Baron Harington of Exton Sir John Harington (1561 – November 20, 1612) was known as Queen Elizabeth Is saucy Godson. He was born in Kelston, Somerset, England. ... Elizabeth I redirects here. ... Alexander Cumming invented the flush toilet under English patent number 814 in 1775. ... Joseph Bramah (1748 - December 9, 1814), born Stainborough, Yorkshire, England. ... Queen Victoria redirects here. ... For other uses, see Crystal Palace. ... // Development and commercial production of electric lighting Development and commercial production of gasoline-powered automobile by Karl Benz, Gottlieb Daimler and Maybach First commercial production and sales of phonographs and phonograph recordings. ... Thomas Crapper (baptized September 28, 1836; d. ... Thomas William Twyford (1849-1921) was a Pottery manufacturer in England. ... 1885 (MDCCCLXXXV) is a common year starting on Thursday of the Gregorian calendar (or a common year starting on Saturday of the 12-day slower Julian calendar). ... Thomas William Twyford (1849-1921) was a Pottery manufacturer in England. ... Year 1886 (MDCCCLXXXVI) was a common year starting on Friday (link will display the full calendar) of the Gregorian calendar (or a common year starting on Wednesday of the 12-day slower Julian calendar). ... Statue of Thomas More on Cheyne Walk. ... For other uses, see England (disambiguation). ... 1906 (MCMVI) was a common year starting on Monday (see link for calendar). ... Year 1980 (MCMLXXX) was a leap year starting on Tuesday (link displays the 1980 Gregorian calendar). ...

The bowl

The bowl, or pan, of a WC is the receptacle into which body waste is excreted; the pan is usually made of vitreous china, but sometimes made of stainless steel or composite plastics. WC bowls may be pedestal (free-standing), cantilever (wall-hung), or squat in design. There are several types of pans in common use: washdown, washout, and siphon. In less common use is the valve closet. There are "male" and "female" bowls also. Males prefer the larger, elongated (or oval) bowls for "penis clearance" while sitting for defecation. The outer edge of a toilet bowl is termed the "rim". Look up Bowl in Wiktionary, the free dictionary. ... A statue of Henry IV of France on a pedestal Pedestal (from French piedestal, Italian piedestallo, foot of a stall) is a term generally applied to the support of a statue or a vase. ... A schematic image of two cantilevers. ... A brick wall A wall is a usually solid structure that defines and sometimes protects an area. ... French Squatter toilet A squat toilet is a toilet used by squatting, rather than sitting. ... Not to be confused with Psiphon. ... Close coupled cistern type flush toilet. ...

Washout WC pans

Washout pans have a shallow pool of water into which waste is excreted. Waste is cleared from the pan by being swept over a weir and into a drain by water from the flush. Washout pans are popular in several countries in Europe, notably Germany and The Netherlands. The bridge and weir mechanism at Sturminster Newton on the River Stour, Dorset. ...

The bowl siphon

The bowl of a flush toilet is a porcelain vessel; in North America and Great Britain this often has a built-in siphon, usually visible as a curved pipe protruding from the back (the "S-bend"). Normally, the bowl contains a small amount of water which is enough to form an air trap inside the siphon pipe, preventing foul air escaping from the sewer. When the toilet is used, liquid flows slowly through the siphon pipe as waste matter is added, but the flow volume is too small to fill the siphon. To flush the toilet, the user activates a flushing mechanism (see below) which pours a large quantity of water quickly into the bowl. This creates a flow large enough to fill the siphon tube, causing the bowl to empty rapidly due to the weight of liquid in the tube. The flow stops when the liquid level in the bowl drops below the first bend of the siphon, allowing air to enter which breaks the column of liquid. “Fine China” redirects here. ... North American redirects here. ... Not to be confused with Psiphon. ... A sewer is an artificial conduit or system of conduits used to remove sewage (human liquid waste) and to provide drainage. ...

Valve closet

The earliest type of WC, the valve closet is now scarce. More complicated in design than other water closets, reliability is lower and maintenance more difficult. The most common use for valve closets is now in portable closets for caravans and camping.

The valve closet has a valve or flap at the exit of the bowl with a water-tight seal to retain a pool of water in the pan. When the WC is flushed, the valve is opened and the water in the pan flows rapidly out of the bowl into the drains, carrying the waste with it.

Cultural variations

In Germany and elsewhere in Europe it is not uncommon for the toilet bowl to allow feces to rest on a ledge before being washed away by the flush.^{[citation needed]} The design of many German lavatory bowls is the reverse of that in most other Western countries, with the sewer outlet towards the front of the bowl rather than at the rear. One theory for this is that it allows the stools to be visually checked more easily for conditions such as presence of worms, or for its color, which vary depending on diet and health. For other uses, see Europe (disambiguation). ... Human Feces (also faeces — see spelling differences), also known as stools, is the waste product of the human digestive system and varies significantly in appearance, depending on the state of the whole digestive system, influenced by diet and health. ...

For a review of Japanese toilet usage and history, see Toilets in Japan. A cleansing jet of water designed to wash the anus of the user of this bidet-style toilet. ...

Parts

• Cover

Look up lid in Wiktionary, the free dictionary. ...

Flushing mechanisms

Retrofit direct flush installation in which the flushometer has been replaced with a sensor-operated system that automatically flushes the fixture when a user departs. The system uses an infrared proximity sensor to detect a user approaching the fixture, then it waits until the user departs. A solenoid is used to actuate the flush from a 6 volt battery inside the unit that also powers the sensor circuit.

The bowl siphon described above is triggered by a large flow of water into the bowl, which is provided by the flushing mechanism. This is usually of one of the following designs: Download high resolution version (1091x1024, 92 KB)Lightvector painting entitled Seen Through the Glass, Darkly This is a lightvector painting that I made of one of the plumbing fixtures thats in the mens room about halfway down MITs infinite corridor (third longest corridor in the world), which... Download high resolution version (1091x1024, 92 KB)Lightvector painting entitled Seen Through the Glass, Darkly This is a lightvector painting that I made of one of the plumbing fixtures thats in the mens room about halfway down MITs infinite corridor (third longest corridor in the world), which...

Direct flush (flushometer)

In the old-style manual flush systems, the user presses a button, which opens a flush valve allowing mains-pressure water to flow into the bowl, or sometimes the user presses directly on a flush lever (a handle connected directly to a flushometer). The valve contains a pneumatic mechanism that closes it after a preset time. This system requires no storage tank, but requires high volume water for a very brief time period. Thus a 3/4 inch (19 mm) pipe at minimum, and preferably a 1 inch (25 mm) pipe, must be used, but the high volume is used only for a short duration so very little water is used for the amount of flushing efficacy delivered. Direct valves are regulated by a device called a "flushometer" that meters out a certain controlled amount of water per flush. Direct flush makes the most efficient use of water, because it uses the water at full pressure and volume. The ability of water to perform the work in removing waste matter from the toilet bowl is given by pressure times volume. Typical pressure in an urban commercial building where flushometers are usually used is around 60 pounds per square inch (400 kPa) which is enough pressure to raise the water 137 feet (42 m) above the toilet bowl. Thus, in some sense, the effectiveness of direct flush is like having the tank 137 feet (42 m) above the bowl (lots of "flush energy"). // These water valves are operated by handles. ...

Flush valves are not permitted on fixed WCs in Britain, although they are sometimes used in railway carriages.

Valve tank type

A storage tank, or cistern, collects between 6 and 17 litres of water over a period of time. This system is suitable for locations plumbed with smaller diameter pipes. The actual water inlet is a 1/2" threaded connector in the UK and 3/8" on the Continent (an unusual example of an imperial standard surviving). The storage tank is kept full by a float valve or ball cock. An outlet in the bottom of the tank is covered by a buoyant plastic cover (the flush valve) which is held in place by water pressure. To flush the toilet, the user pushes a lever, which lifts the flush valve from the outlet. The valve then floats clear of the outlet, allowing the tank to empty quickly into the bowl. As the water level drops, the floating flush valve descends back to the bottom of the tank and covers the outlet pipe again. This system is common in homes in the USA. Tank type toilets waste the energy in the water by converting the potential energy of 137 feet (42 m) (the "head" of pressure in typical North American city water mains) times acceleration due to gravity, into around 18 inches (460 mm) above the bowl. Some older style toilets mitigate this waste of energy to some degree by having the tank be as high as possible (up near the bathroom ceiling), but modern tank-type toilets waste the energy in the water, and therefore either use more water than necessary for a given flushing job, or for the same amount of water, flush less effectively than direct flush. A float valve is a mechanical feedback mechanism that regulates fluid level by using a float to drive an inlet valve such that a higher fluid level will force the valve closed whilst a lower fluid level will force the valve open. ... A ballcock is a mechanism for filling water tanks, such as those found in flush toilets, while avoiding overflow. ...

Tanks near the ceiling are flushed by means of a dangling pull chain, often with a large ornate handle, connected to a flush lever on the cistern itself. "Pulling the chain" remains a British euphemism for flushing the toilet, although this type of cistern is now relatively uncommon.

13L Versus 6L

In the United States, 13 litre-per-flush toilets (still commonplace in Canada) have been banned in favor of 6L toilets. While conservation of water is an admirable goal, even the best 6 litre close-coupled (tank mounted directly on the bowl) toilets have a tendency to either become clogged themselves, or have the drain pipes beyond them become clogged due to insufficient velocity of the waste matter^{[citation needed]}.

Many manufacturers speak of "grams of tofu" and other "ratings"; it must be noted, however, that the toilet manufacturers have no vested interest in discussing the inevitable clogging further down the plumbing system. For optimum conservation of water, systems other than close-coupled tank-type toilets are preferable.

American Standard Timed Cup Flush Valve

The flush valve is responsible for quickly emptying the tank (cistern) and driving the waste from the bowl. It is sometimes referred to as the American Standard Tilting Flush Valve.

In 1958 (citation: patent date), American Standard introduced a unique flush valve which differed from the conventional "flapper". Though no longer used in new toilets, this valve design remains an extremely popular upgrade when repairing an existing toilet. American Standard is a leading United States manufacturer of bathroom equiptment. ...

The American Standard timed cup flush valve incorporates two cylinders mounted orthogonally, attached to a flushing disk. In mathematics, orthogonal is synonymous with perpendicular when used as a simple adjective that is not part of any longer phrase with a standard definition. ...

Operation is best understood as follows:

1. Prior to flushing, the tank (cistern) is full of water. Both cylinders are submerged, and the flushing disk remains tightly shut due to the weight of the water pushing it against its seat.
2. With a flush, the disk is pulled away from the seat. Water escapes to the bowl. The horizontal cylinder provides buoyancy to hold the disk away from the valve seat. The vertical cylinder remains full of water.
3. As the tank empties, the buoyancy of the horizontal cylinder is compromised, but the vertical cylinder remains full of water which provides sufficient counterbalance to the flushing disk, holding it open.
4. After the tank has emptied, the water in the vertical cylinder drains through a 3/16" hole in the bottom of the cylinder. At some point after the tank has emptied, the mass of the flushing disk and horizontal cylinder exceeds the mass of the vertical (timing cup) cylinder, causing the flushing disk to fall back onto its seat.
5. The fill valve refills the tank for the next flush cycle. In physics, buoyancy is the upward force on an object produced by the surrounding fluid (i. ...

A stellar benefit of the American Standard Timed Cup flush valve is that an incomplete flush is virtually impossible. Repairs are easy, generally requiring only a flushing disk.

One-Piece Fill Valve

The fill valve is responsible for refilling the tank (cistern) with water.

Toilets manufactured prior to 1990 are likely to include a "Hoover-style" ballcock, which is a fill valve employing a ball-type float mounted on an arm. As the float rises, so does the arm. The arm is connected to a linkage which blocks the water flow into the toilet tank, and thus maintains a stable level in the tank.

A one-piece fill valve consists of a tower which is encircled by a plastic float assembly. Operation is otherwise the same as a conventional Hoover ballcock, though the geometry is different. By virtue of the more compact layout, interference between the float and other obstacles (tank insulation, flush valve) is greatly minimized, thus reducing reliability issues (stuck floats, etc).

Many modern toilets use a Fluidmaster brand fill valve (ref. open any new high-end Kohler or American Standard toilet, look for the Fluidmaster name on the float); cheaper brands and models tend to use a similar concept replica. Kohler is a family name of German origin and can refer to: Kohler, Wisconsin Kohler Company Kohler Glacier Kohler Range People Alan Kohler, Australian journalist Kaufmann Kohler, reform rabbi Herbert Kohler, Jr. ... American Standard is a leading United States manufacturer of bathroom equiptment. ...

The one-piece fill valve offers several advantages:
- Close-positioned float is less likely to become entangled in obstacles
- Close-positioned float will work in the vast majority of toilet tanks
- Design of valve assembly affords itself to quiet fills and shut-offs (no loud noises as the toilet refills)
- Geometry of valve and float design adapts well to anti-leak latching mechanisms, potentially saving the owner considerable expense refilling a leaky toilet tank (http://www.fluidmaster.com/fill_products_400ls.html)

Valveless siphon tank type

This system, invented by Albert Giblin and common in the UK, uses a storage tank similar to that used in the flush valve system above. The user pushes a lever or button, forcing the water up into a siphon (not to be confused with the bowl siphon, "S-bend") which empties the entire tank into the bowl. The advantage of a siphon over the flush valve is that is has no sealing washers that can wear out and cause leaks, so it is favoured in places where there is a need to conserve water. Until recently, the use of siphon-type cisterns was mandatory in the UK to avoid the potential waste of water by millions of leaking toilets. Assorted washers: flat, split, star and insulated A washer is a thin disk with a hole, usually in the middle. ...

Older installations used a high-level cistern, or high suite, fitted above head height, that was operated by pulling a chain hanging down from a lever attached to the cistern. Some people still refer to the act of flushing a toilet (even a new low-cistern, or low suite, type) as "pulling the chain" or "flushing the chain". Modern versions have a neater-looking low-level cistern with a lever that the user can reach directly, or a 'close-coupled' cistern that is even lower down and integrated with the bowl. This lower level results in loss of potential energy in the water, as the potential energy of water pressure is converted to the potential energy of height in a less advantageous manner, due to very little height, as described above. Consequently modern toilets usually do not flush as effectively.^{[citation needed]}

Pressure assist

Not uncommon in the United States, this system (invented by R. Bruce Martin) uses the water pressure within a structure to compress air within a closed vessel located within the vitreous enclosure. When flushed, the compressed air pushes into the bowl at a velocity (flow rate in gallons per minute or liters per second) significantly higher than gravity flow. This system is more water efficient than a tank type and can be installed into the same fittings as the latter. It also costs 10% less than the new 3" (75 mm) gravity flapper equipped tank-type toilets. Pressure assist toilets are used in both private (single and multiple and lodging) bathrooms as well as light commercial installations (offices, etc.) They hardly ever clog and so require less maintenance, but tend to be noisier - a concern for residential settings. The inner bowl is thought to stay cleaner (in appearance) than gravity counterparts because of the pressure assisted flush.

Automatic flush

"Automatic flush" refers to a triggering mechanism, rather than a water propulsion mechanism, although is usually implemented together with direct flush systems. Autoflush systems, as the name suggests, flush automatically once the user has left. Typically, an override button is provided if the user wishes to trigger flushing earlier or, when the system has true mechanical manual override, it can be pushed if the power source to the flush valve has failed. In retrofit installations, a self-contained battery-powered or hardwired unit can be added to an existing manual flushometer, which can automatically flush when a user departs.

There are two main kinds of machine vision systems used for sensor operated flush: passive and active. Passive systems such as passive infrared (PIR) see the body of the user by electromagnetic energy that is received by the sensor. Active vision systems provide a source of electromagnetic energy (radar, infrared, or the like) and see reflected energy from the target (the user of the fixture). Although units usually ship with a factory-set sensor range, installers can adjust the setting to accommodate special needs or circumstances, such as for restrooms primarily used by children.

Automatic flushing cisterns may also be of the siphonic pattern, where a siphon is activated once water fills the tank and begins to run through the siphon tube; this is the most common form of automatic operation in the UK.

Manual operation

If the flush mechanism should fail in any of these systems, the bowl siphon can be activated by emptying a large bucket of water into the bowl. A domestic hose pipe will not work, as it cannot supply water fast enough to fill the siphon tube. A larger hose, or small firehose, even a 3/4 inch (2 cm) garden hose thread (GHT) firehose, provides sufficient water to flush without a bucket. 150. ...

Flush Repair

For North American Valve Tank type toilets, if the handle should have be held down to achieve a complete flush an adjustment might need to be made in the handle-float-stopper mechanism. The handle of a toilet is typically attached to a stopper via a chain. A float is attached to the chain between the handle lever and the stopper. The float acts as a counter-balance to allow a certain amount of water to escape through the flush hole in the tank. The float mechanism on the chain should be some distance under the water level of the tank so it can keep the stopper open during a flush until the tank level reaches a certain level. At a certain level the float will pop to the top of the water and the stopper will close. The float should be at a position on the chain where it is under water and does not have so much buoyancy to allow water to leak through the stopper.

For British toilets, the siphon's hidden, oblong, plastic diaphragm will tend to split after around 10 years. The effectiveness of the flush can deteriorate suddenly or gradually as the number and size of splits increase. This will often prompt owners to replace much of the system. However, the diaphragms are of a standard design and are cheap (50p) and simple to replace. Inside the cistern, unhooking the flush-handle's s-link allows the plunger and diaphragm to be removed, once the lower part of the siphon is unscrewed (it is not necessary to remove the whole assembly -- the main outlet pipe can be left in place. There is also a small rubber diaphragm in the ballcock inlet assembly, which can deteriorate over a period of around 10 years -- if adjusting the water level becomes problematic, it is worth changing this inexpensive item (50p).

"The Flush"

Flushometer type toilets are much more common in commercial installations (at least in the US); they're almost never seen in residential installations, except for dormitory and barracks areas. The installation of large numbers of toilets in buildings like sports stadiums has led to a test which is commonly performed before the final release of such a project, which is called "The Flush". It entails stationing individuals in each restroom in the facility -- in large installations this can amount to 100-400 people -- and cueing them all by radio to flush their toilets as close to simultaneously as possible. Barrack may refer to: Barracks, a type of military housing. ...

The purpose of the test is twofold: it checks that the plumbing design engineers got their sums right on the sizes of both the main water supply to the building, and also the size of the drain piping. The test is commonly not made public before it happens, so as to avoid embarrassment in the event of a failure.

Water closet (WC)

The water closet was the original term for a room with a toilet, since the bathroom was where one was to take a bath. This term is still used today in some places, but might be a room that has both toilet and bath. Plumbing manufacturers often use the term to delineate toilets from urinals. A urinal is a specialized toilet designed to be used only for urination, not defecation, and almost always by a standing male. ...

Flushing direction

It is a commonly held misconception that when flushed, the water in a toilet bowl swirls one way if the toilet is north of the equator and the other way if south of the equator, due to the Coriolis effect. In reality, the direction that the water will take is determined by the geometry of the bowl and other factors, not the Coriolis effect. In the inertial frame of reference (upper part of the picture), the black object moves in a straight line. ...

References

1. ^ Rodda, J. C. and Ubertini, Lucio (2004). The Basis of Civilization - Water Science? pg 161. International Association of Hydrological Sciences (International Association of Hydrological Sciences Press 2004).
2. ^ C. Michael Hogan, Knossos Fieldnotes, The Modern Antiquarian (2007)
3. ^ 100 Years of Australian Innovation - Dual flush technology

See also

• Ecological sanitation
• Low flush toilet
• Plumbing
• Plumbing fixtures
• Squat toilet
• Toilet
• Toilet rim block
• Toilets in Japan
• Urinal
• Washroom

Ecological sanitation, also known as ecosan, is a modern alternative to conventional sanitation techniques. ... A plumber wrench for working on pipes and fittings A complex arrangement of rigid steel piping, stop valves regulate flow to various parts of the building. ... A plumbing fixture is a device which is part of a system to deliver and drain away water, but which is also configured to enable a particular use. ... French Squatter toilet A squat toilet is a toilet used by squatting, rather than sitting. ... For other uses, see Toilet (disambiguation). ... Location and close-up of Toilet rim block in its holder A Toilet rim block is a disinfectant block used in flush toilets which slowly dissolves in water. ... A cleansing jet of water designed to wash the anus of the user of this bidet-style toilet. ... A urinal is any specialized toilet or container designed for urinating, generally by men and boys. ... “Public toilet” redirects here. ...

External links

• Intelligent Bathroom Fixtures and Systems (comparison between passive and active vision systems for use with plumbing fixtures, as published in Leonardo, 36(3), pp 199–120, June 2003)
• A Brief history of Wells and Toilets, 2005 book (link to pdf-file)
• Did Thomas Crapper invent the flush toilet? - at Snopes
• "Superflushing their way to the Super Bowl" - PM Engineer
• Toilet, its history and reality.