Flutter: In electronics, rapid variation of signal parameters, such as amplitude, phase, and frequency. In structures, rapid periodic motion caused by interaction of structural mass, stiffness, and aerodynamic forces.

Note: Examples of flutter are;

• rapid variations in received signal levels, such as variations that may be caused by atmospheric disturbances, antenna movements in a high wind, or interaction with other signals,
• in radio propagation, a phenomenon in which nearly all radio signals that are usually reflected by ionospheric layers in or above the E-region experience partial or complete absorption,
• in radio transmission, rapidly changing signal levels, together with variable multipath time delays, caused by reflection and possible partial absorption of the signal by aircraft flying through the radio beam or common scatter volume,
• the variation in the transmission characteristics of a loaded telephone circuit caused by the action of telegraph direct currents on the loading coils,
• in recording and reproducing equipment, the deviation of frequency caused by irregular mechanical motion, e.g., that of capstan angular velocity in a tape transport mechanism, during operation.

Source: from Federal Standard 1037C and from MIL-STD-188

Also:

• in aircraft structures or control surfaces, a rapid resonant motion, potentially destructive, usually present above some limiting aircraft speed. See Aeroelasticity for a full discussion.
• In aeronautics is, in a few words, an unstability of the aircraft's structural vibration modes due to aerodynamic forces presents.
• in suspended fabric such as flags or clothing, rapid motion due to wind.