 Petro-Canada Fuel Pump used to transfer fuel at a gas station. A fuel pump is an essential component on a car or other internal combustion engined device. Fuel has to be pumped from the fuel tank to the engine and delivered under low pressure to the carburetor or under high pressure to the fuel injection system. Some fuel injected engines have two fuel pumps for this purpose: one low pressure/high volume supply pump in the tank and one high pressure/low volume pump on or near the engine. Image File history File linksMetadata Download high resolution version (500x765, 363 KB)Fuelpump, fitted to cylinder head of a Saab H engine in a Saab 90. ...
Image File history File linksMetadata Download high resolution version (500x765, 363 KB)Fuelpump, fitted to cylinder head of a Saab H engine in a Saab 90. ...
The cylinder head from a GMC van. ...
Image File history File linksMetadata Fuelpump. ...
Image File history File linksMetadata Fuelpump. ...
Image File history File links Download high resolution version (1200x1600, 481 KB) Description: Petro-Canada Fuel Pump 11 7314 Markham Rd. ...
Image File history File links Download high resolution version (1200x1600, 481 KB) Description: Petro-Canada Fuel Pump 11 7314 Markham Rd. ...
Petro-Canada is a Canadian oil and gas firm headquartered in Calgary, Alberta. ...
This article or section does not cite its references or sources. ...
A colorized automobile engine The internal combustion engine is a heat engine in which the burning of a fuel occurs in a confined space called a combustion chamber. ...
A fuel tank is part of an engine system in which the fuel is stored and released into the engine. ...
Stromberg side-draft carburetor The carburetor, carburettor, or carburetter (see spelling differences), also called carb (in North America) or carbie (chiefly in Australia) for short, is a device that mixes air and fuel for an internal-combustion engine. ...
The examples and perspective in this article or section may not represent a worldwide view. ...
Mechanical pump In earlier cars built before the late 1970s, the pump was mechanically driven by a lobe on the engine's camshaft and therefore bolted to the engine block. It created negative pressure to "suck" the gasoline through the lines. However, the negative pressure from the pump, in combination with heat from the engine and/or hot weather, could cause the gasoline to boil. The fuel pump, designed to pump liquid, not vapor, would be unable to suck more gasoline to the engine, which would cut out. This condition is known as "vapour lock". Also a suction pump could suck in air through (difficult to diagnose) faulty hose connections. A leaking connection in a pressure line will show itself immediately. This article or section does not cite its references or sources. ...
The 1970s decade refers to the years from 1970 to 1979, inclusive. ...
Double overhead cams control the opening and closing of a cylinders valves The camshaft is an apparatus used in piston engines to operate poppet valves. ...
Gasoline, also called petrol, is a petroleum-derived liquid mixture consisting primarily of hydrocarbons and enhanced with benzenes to increase octane ratings, used as fuel in internal combustion engines. ...
An engine is something that produces some effect from a given input. ...
Vapour lock is a problem internal combustion engines can suffer. ...
Electric pump Nowadays, the fuel pump is located inside of the fuel tank and is usually electric. The pump creates positive pressure in the fuel lines, pushing the gasoline to the engine. The higher gasoline pressure raises the boiling point. Placing the pump in the tank puts the component least likely to handle gasoline vapor well (the pump itself) farthest from the engine, submersed in cool liquid. Another benefit to placing the pump inside the tank is that it is less likely to start a fire. Though electrical components (such as a fuel pump) can spark and ignite fuel vapors, liquid fuel will not explode (see explosive limit) and therefore submerging the pump in the tank is one of the safest places to put it. In most cars, the fuel pump delivers a constant flow of gasoline to the engine; fuel not used is returned to the tank. This further reduces the chance of the fuel boiling, since it is never kept close to the hot engine for too long. A fuel tank is part of an engine system in which the fuel is stored and released into the engine. ...
The explosive limit of a gas or a vapour, is the limiting concentration (in air) that is needed for the gas to ignite and explode. ...
The electric fuel pump is generally on whenever the car's ignition switch is in the "on" position. Depressing the gas pedal results in the throttle body opening on the engine (metering the air going in) rather than engaging the fuel pump. The ignition switch does not carry the power to the fuel pump, instead it activates a relay which will handle the higher current load. It is common for the fuel pump relay to become oxidized and cease functioning; this is much more common than the actual fuel pump failing. Note: This page needs to be cleaned up to be brought into conformance with the Manual of Style. ...
Automotive style miniature relay A relay is an electrical switch that opens and closes under control of another electrical circuit. ...
The most fundamental reactions in chemistry are the redox processes. ...
Some cars with an electronic control unit have safety logic that will shut the electric fuel pump off even if the ignition is "on" if there is no oil pressure, either due to engine bearing damage or a non stalled engine, e.g. in a car accident. In case of an accident this will also prevent fuel leaking from any ruptured fuel line. Other cars have an additional roll over valve, that will shut off the fuel pump in case the car rolls over. In automotive electronics, an electronic control unit (ECU) is an embedded microcomputer that controls one or more of the electrical subsystems in a vehicle. ...
Logic, from Classical Greek λόγος (logos), originally meaning the word, or what is spoken, (but coming to mean thought or reason) is most often said to be the study of criteria for the evaluation of arguments, although the exact definition of logic is a matter of controversy among philosophers. ...
A bearing is a component used to reduce friction in a machine. ...
The result of excessive speed, this cement truck rolls over into the front garden of a house. ...
The fuel sending unit assembly is the combination of the electric fuel pump, filter, and the electronic device used to measure the amount of fuel in the tank via a float attached to a sensor with sends data to the dash mounted fuel gauge. A fuel gauge (or gas gauge) is an instrument used to indicate the level of fuel contained in a tank. ...
External links
|
Feeds |
Contact