In telecommunication, a Hamming code is a linear error-correcting code named after its inventor, Richard Hamming. Hamming codes can detect and correct single-bit errors. In other words, the Hamming distance between the transmitted and received code-words must be zero or one for reliable communication. Alternatively, it can detect (but not correct) up to two simultaneous bit errors. Copy of the original phone of Alexander Graham Bell at the Musée des Arts et Métiers in Paris Telecommunication is the assisted transmission of signals over a distance for the purpose of communication. ... In mathematics, a (binary) linear code of length and rank is a linear subspace with dimension of the vector space . Aside: is the field of two elements and is the set of all n-tuples of length over . ... In information theory and coding, an error-correcting code or ECC is a code in which each data signal conforms to specific rules of construction so that departures from this construction in the received signal can generally be automatically detected and corrected. ... Richard Wesley Hamming (February 11, 1915 – January 7, 1998) was a mathematician whose work had many implications for computer science and telecommunications. ... In information theory, the Hamming distance between two strings of equal length is the number of positions for which the corresponding symbols are different. ...

In contrast, the simple parity code cannot correct errors, nor can it be used to detect more than one error (such as where two bits are transposed). Look up Parity in Wiktionary, the free dictionary Parity is a concept of equality of status or functional equivalence. ...

In mathematical terms, Hamming codes are a class of binary linear codes. For each integer m > 1 there is a code with parameters: [2^m − 1,2^m − m − 1,3]. The parity-check matrix of a Hamming code is constructed by listing all columns of length m that are pair-wise independent. For other meanings of mathematics or uses of math and maths, see Mathematics (disambiguation) and Math (disambiguation). ... In coding theory, a parity-check matrix of a linear block code C is a generator matrix of the dual of the code. ...

Because of the simplicity of Hamming codes, they are widely used in computer memory (RAM). In particular, a single-error-correcting and double-error-detecting variant commonly referred to as SECDED. Look up RAM, Ram, ram in Wiktionary, the free dictionary. ...

History

Hamming worked at Bell Labs in the 1940s on the Bell Model V computer, an electromechanical relay-based machine with cycle times in seconds. Input was fed in on punch cards, which would invariably have read errors. During weekdays, special code would find errors and flash lights so the operators could correct the problem. During after-hours periods and on weekends, when there were no operators, the machine simply moved on to the next job. Bell Laboratories (also known as Bell Labs and formerly known as AT&T Bell Laboratories and Bell Telephone Laboratories) was the main research and development arm of the United States Bell System. ... In engineering, electromechanics combines electromagnetism and mechanics. ... Punched cards (or Hollerith cards, or IBM cards), are pieces of stiff paper that contain digital information represented by the presence or absence of holes in predefined positions. ...

Hamming worked on weekends, and grew increasingly frustrated with having to restart his programs from scratch due to the unreliability of the card reader. Over the next few years he worked on the problem of error-correction, developing an increasingly powerful array of algorithms. In 1950 he published what is now known as Hamming Code, which remains in use in some applications today.

Codes predating Hamming

A number of simple error-detecting codes were used before Hamming codes, but none were as effective as Hamming codes in the same overhead of space.

Parity

Main article: Parity bit

Parity adds a single bit that indicates whether the number of 1 bits in the preceding data was even or odd. If a single bit is changed in transmission, the message will change parity and the error can be detected at this point. (Note that the bit that changed may have been the parity bit itself!) The most common convention is that a parity value of 1 indicates that there is an odd number of ones in the data, and a parity value of 0 indicates that there is an even number of ones in the data. In other words: The data and the parity bit together should contain an even number of 1s. A parity bit is a binary digit that indicates whether the number of bits with value of one in a given set of bits is even or odd. ... This article is about the unit of information, see Bit (disambiguation) for other meanings. ... This article is about the number one. ... In mathematics, any integer (whole number) is either even or odd. ... In mathematics, any integer (whole number) is either even or odd. ...

Parity checking is not very robust, since if the number of bits changed is even, the check bit will be valid and the error will not be detected. Moreover, parity does not indicate which bit contained the error, even when it can detect it. The data must be discarded entirely and re-transmitted from scratch. On a noisy transmission medium, a successful transmission could take a long time or may never occur. However, while the quality of parity checking is poor, since it uses only a single bit, this method results in the least overhead. Furthermore, parity checking does allow for the restoration of a missing bit when the missing bit is known.

Two-out-of-five code

Main article: Two-out-of-five code

In the 1940s Bell used a slightly more sophisticated m of n code known as the two-out-of-five code. This code ensured that every block of five bits (known as a 5-block) had exactly two 1s. The computer could tell if there was an error if in its input there were not exactly two 1s in each block. Two-of-five was still only able to detect single bit errors; if one bit flipped to a 1 and another to a 0 in the same block, the two-of-five rule remained true and the error would go undiscovered. In telecommunication, a two-out-of-five code is an m of n code thet provides exactly ten possible combinations, so is popular for representing decimal digits using five binary bits. ... An m of n code is a separable error detection code with a code word length of n bits, where each code word contains exactly m instances of a one. ...

Repetition

Main article: triple modular redundancy

Another code in use at the time repeated every data bit several times in order to ensure that it got through. For instance, if the data bit to be sent was a 1, an n=3 repetition code would send "111". If the three bits received were not identical, an error occurred. If the channel is clean enough, most of the time only one bit will change in each triple. Therefore, 001, 010, and 100 each correspond to a 0 bit, while 110, 101, and 011 correspond to a 1 bit, as though the bits counted as "votes" towards what the original bit was. A code with this ability to reconstruct the original message in the presence of errors is known as an error-correcting code. In computing, triple modular redundancy (TMR) is a fault tolerant form of N-modular redundancy, in which three systems perform a process and that result is processed by a voting system to produce a single output. ...

Such codes cannot correctly repair all errors, however. In our example, if the channel flipped two bits and the receiver got "001", the system would detect the error, but conclude that the original bit was 0, which is incorrect. If we increase the number of times we duplicate each bit to four, we can detect all two-bit errors but can't correct them (the votes "tie"); at five, we can correct all two-bit errors, but not all three-bit errors.

Moreover, the repetition code is extremely inefficient, reducing throughput by three times in our original case, and the efficiency drops drastically as we increase the number of times each bit is duplicated in order to detect and correct more errors.

Hamming codes

If more error-correcting bits are included with a message, and if those bits can be arranged such that different incorrect bits produce different error results, then bad bits could be identified. In a 7-bit message, there are seven possible single bit errors, so three error control bits could potentially specify not only that an error occurred but also which bit caused the error.

Hamming studied the existing coding schemes, including two-of-five, and generalized their concepts. To start with he developed a nomenclature to describe the system, including the number of data bits and error-correction bits in a block. For instance, parity includes a single bit for any data word, so assuming ASCII words with 7-bits, Hamming described this as an (8,7) code, with eight bits in total, of which 7 are data. The repetition example would be (3,1), following the same logic. The information rate is the second number divided by the first, for our repetition example, 1/3. Image:ASCII fullsvg There are 95 printable ASCII characters, numbered 32 to 126. ...

Hamming also noticed the problems with flipping two or more bits, and described this as the "distance" (it is now called the Hamming distance, after him). Parity has a distance of 2, as any two bit flips will be invisible. The (3,1) repetition has a distance of 3, as three bits need to be flipped in the same triple to obtain another code word with no visible errors. A (4,1) repetition (each bit is repeated four times) has a distance of 4, so flipping two bits can be detected, but not corrected. When three bits flip in the same group there can be situations where the code corrects towards the wrong code word. In information theory, the Hamming distance between two strings of equal length is the number of positions for which the corresponding symbols are different. ...

Hamming was interested in two problems at once; increasing the distance as much as possible, while at the same time increasing the information rate as much as possible. During the 1940s he developed several encoding schemes that were dramatic improvements on existing codes. The key to all of his systems was to have the parity bits overlap, such that they managed to check each other as well as the data.

General algorithm

Although any number of algorithms can be created, the following general algorithm positions the parity bits at powers of two to ease calculation of which bit was flipped upon detection of incorrect parity.

1. All bit positions that are powers of two are used as parity bits. (positions 1, 2, 4, 8, 16, 32, 64, etc.), see A000079 at the On-Line Encyclopedia of Integer Sequences.
2. All other bit positions are for the data to be encoded. (positions 3, 5, 6, 7, 9, 10, 11, 12, 13, 14, 15, 17, etc.), see A057716 at the On-Line Encyclopedia of Integer Sequences.
3. Each parity bit calculates the parity for some of the bits in the code word. The position of the parity bit determines the sequence of bits that it alternately checks and skips.
   • Position 1 (n=1): skip 0 bit (0=n−1), check 1 bit (n), skip 1 bit (n), check 1 bit (n), skip 1 bit (n), etc. (1,3,5,7,9,11,13,15,...)
   • Position 2 (n=2): skip 1 bit (1=n−1), check 2 bits (n), skip 2 bits (n), check 2 bits (n), skip 2 bits (n), etc. (2,3,6,7,10,11,14,15,...)
   • Position 4 (n=4): skip 3 bits (3=n−1), check 4 bits (n), skip 4 bits (n), check 4 bits (n), skip 4 bits (n), etc. (4,5,6,7,12,13,14,15,20,21,22,23,...)
   • Position 8 (n=8): skip 7 bits (7=n−1), check 8 bits (n), skip 8 bits (n), check 8 bits (n), skip 8 bits (n), etc. (8-15,24-31,40-47,...)
   • Position 16 (n=16): skip 15 bits (15=n−1), check 16 bits (n), skip 16 bits (n), check 16 bits (n), skip 16 bits (n), etc. (16-31,48-63,80-95,...)
   • Position 32 (n=32): skip 31 bits (31=n−1), check 32 bits (n), skip 32 bits (n), check 32 bits (n), skip 32 bits (n), etc. (32-63,96-127,160-191,...)
   • General rule for position n: skip n−1 bits, check n bits, skip n bits, check n bits...
   • And so on.

In other words, the parity bit at position 2^k checks bits in positions having bit k set in their binary representation. Conversely, for instance, bit 13, i.e. 1101₍₂₎, is checked by bits 1000₍₂₎ = 8, 0100₍₂₎=4 and 0001₍₂₎ = 1. The On-Line Encyclopedia of Integer Sequences (OEIS) is an extensive searchable database of integer sequences, freely available on the Web. ... The On-Line Encyclopedia of Integer Sequences (OEIS) is an extensive searchable database of integer sequences, freely available on the Web. ...

This general rule can be shown visually:

Bit position		1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	...
Encoded data bits		p1	p2	d1	p3	d2	d3	d4	p4	d5	d6	d7	d8	d9	d10	d11	p5	d12	d13	d14	d15
Parity bit coverage	p1	X		X		X		X		X		X		X		X		X		X
	p2		X	X			X	X			X	X			X	X			X	X
	p3				X	X	X	X					X	X	X	X					X
	p4								X	X	X	X	X	X	X	X
	p5																X	X	X	X	X

Shown is only 20 encoded bits (5 parity, 15 data) but the pattern continues indefinitely. The key thing about Hamming Codes that can easily be seen from visual inspection is that any given bit has a unique parity bit coverage. For example, the only bit covered by p3 and p4 only is bit 12 (d8). It is this unique bit coverage that lets a Hamming Code correct any single bit error.

It is also how a two-bit error can be detected but not corrected. For example, if bits 1 (p1) & 2 (p2) were flipped then this would be confused with bit 3 (d1) being flipped since the parity bit coverage of bit 3 is the same as bits 1 & 2.

Hamming codes with additional parity (SECDED)

Hamming codes have a minimum distance of 3, which means that the code can detect and correct a single error, but a double bit error is indistinguishable from a different code with a single bit error. Thus, they can detect double-bit errors only if correction is not attempted.

By including an extra parity bit, then it is possible to increase the minimum distance of the Hamming code to 4. This gives the code the ability to detect and correct a single error and at the same time detect (but not correct) a double error. (It could also be used to detect up to 3 errors but not correct any.)

This code system is popular in computer memory systems, where it is known as SECDED ("single error correction, double error detection"). Particularly popular is the (72,64) code, a truncated (127,120) Hamming code plus an additional parity bit, which has the same space overhead as a (9,8) parity code.

Hamming(7,4) code

Graphical depiction of the 4 data bits and 3 parity bits and which parity bits apply to which data bits

Main article: Hamming(7,4)

In 1950, Hamming introduced the (7,4) code. It encodes 4 data bits into 7 bits by adding three parity bits. Hamming(7,4) can detect and correct single-bit errors but can only detect double-bit errors. Year 1950 (MCML) was a common year starting on Sunday (link will display the full calendar) of the Gregorian calendar. ...

The code generator matrix and the parity-check matrix are: In coding theory, a generator matrix is a matrix whose rows generate all elements of a linear code. ... In coding theory, a parity-check matrix of a linear block code C is a generator matrix of the dual of the code. ...

and

For example, 1011 is encoded into 0110011 where blue digits are data and red digits are parity.

Hamming(8,4) code

The same (7,4) example from above with an extra parity bit

The Hamming(7,4) can easily be extended to an (8,4) code by adding an extra parity bit on top of the (7,4) encoded word (see above section). This can be summed up with the revised matrices:

The addition of the fourth row computes the sum of all bits (data and parity) as the fourth parity bit.

For example, 1011 is encoded into 01100110 where blue digits are data; red digits are parity from the Hamming(7,4) code; and the green digit is the parity added by Hamming(8,4). The green digit makes the parity of the (7,4) code even.

Hamming(11,7) code

Graphical depiction of the 7 data bits and 4 parity bits and which parity bits apply to which data bits

Bit position of the data and parity bits

Mapping in the example data value. The parity of the red, yellow, green, and blue circles are even.

A bit error on bit 11 causes bad parity in the red, yellow, and green circles

Consider the 7-bit data word "0110101". To demonstrate how Hamming codes are calculated and used to detect an error, see the tables below. They use d to signify data bits and p to signify parity bits. A parity bit is a binary digit that indicates whether the number of bits with value of one in a given set of bits is even or odd. ...

Firstly the data bits are inserted into their appropriate positions and the parity bits calculated in each case using even parity. The diagram to the right shows which of the four parity bits cover which data bits.

Calculation of Hamming code parity bits

	p1	p2	d1	p3	d2	d3	d4	p4	d5	d6	d7
Data word (without parity):			0		1	1	0		1	0	1
p1	1		0		1		0		1		1
p2		0	0			1	0			0	1
p3				0	1	1	0
p4								0	1	0	1
Data word (with parity):	1	0	0	0	1	1	0	0	1	0	1

The new data word (with parity bits) is now "10001100101". We now assume the final bit gets corrupted and turned from 1 to 0. Our new data word is "10001100100"; and this time when we analyse how the Hamming codes were created we flag each parity bit as 1 when the even parity check fails.

Checking of parity bits (switched bit highlighted)

	p1	p2	d1	p3	d2	d3	d4	p4	d5	d6	d7	Parity check	Parity bit
Received data word:	1	0	0	0	1	1	0	0	1	0	0
p1	1		0		1		0		1		0	Fail	1
p2		0	0			1	0			0	0	Fail	1
p3				0	1	1	0					Pass	0
p4								0	1	0	0	Fail	1

The final step is to evaluate the value of the parity bits (remembering the bit with lowest index is the least significant bit, i.e., it goes furthest to the right). The integer value of the parity bits is 11, signifying that the 11th bit in the data word (including parity bits) is wrong and needs to be flipped. The binary representation of decimal 149, with the lsb highlighted. ...

	p4	p3	p2	p1
Binary	1	0	1	1
Decimal	8		2	1	Σ = 11

Flipping the 11th bit changes 10001100100 back into 10001100101. Removing the Hamming codes gives the original data word of 0110101.

Note that as parity bits do not check each other, if a single parity bit check fails and all others succeed, then it is the parity bit in question that is wrong and not any bit it checks.

Finally, suppose two bits change, at positions x and y. If x and y have the same bit at the 2^k position in their binary representations, then the parity bit corresponding to that position checks them both, and so will remain the same. However, some parity bit must be altered, because x ≠ y, and so some two corresponding bits differ in x and y. Thus, the Hamming code detects all two bit errors — however, it cannot distinguish them from 1-bit errors.

References

• MacKay, David J.C. (September 2003). Information Theory, Inference and Learning Algorithms. Cambridge: Cambridge University Press. ISBN 0-521-64298-1. 
• D.K. Bhattacharryya, S. Nandi. "An efficient class of SEC-DED-AUED codes". 1997 International Symposium on Parallel Architectures, Algorithms and Networks (ISPAN '97): 410–415. DOI:10.1109/ISPAN.1997.645128. 

This article needs to be cleaned up to conform to a higher standard of quality. ... This article is about the city in England. ... The headquarters of the Cambridge University Press, in Trumpington Street, Cambridge. ... A digital object identifier (or DOI) is a standard for persistently identifying a piece of intellectual property on a digital network and associating it with related data, the metadata, in a structured extensible way. ...

See also

• Hamming distance
• Golay code
• Reed-Muller code
• Reed-Solomon code
• Turbo code
• Low-density parity-check code

In information theory, the Hamming distance between two strings of equal length is the number of positions for which the corresponding symbols are different. ... A Golay code can be binary or ternary. ... The Reed-Muller codes are a family of linear error-correcting codes used in communications. ... Reed-Solomon error correction is a coding scheme which works by first constructing a polynomial from the data symbols to be transmitted and then sending an over-sampled plot of the polynomial instead of the original symbols themselves. ... In electrical engineering and digital communications, turbo codes are a class of recently-developed high-performance error correction codes finding use in deep space satellite communications and other applications where designers seek to achieve maximal information transfer over a limited-bandwidth communication link in the presence of data-corrupting noise. ... A low-density parity-check code (LDPC code) is an error correcting code, a method of transmitting message over a noisy transmission channel. ...

External links

• CGI script for calculating Hamming distances (from R. Tervo, UNB, Canada)