NationMaster - Encyclopedia: Jib

A jib is a triangular staysail set ahead of the foremost mast of a sailing boat. Its tack is fixed to the bowsprit, to the bow, or to the deck between the bowsprit and the foremost mast. Jibs and spinnakers are the two main types of headsails on a modern boat. Look up Jib in Wiktionary, the free dictionary. ... Image File history File links Jib_vs_genoa. ... Image File history File links Jib_vs_genoa. ... A genoa (pronounced like the city, or as jenny) is a type of large headsail used on bermuda rigged craft, commonly the single-masted sloop and twin-masted boats such as yawl and ketch. ... A staysail is a fore-and-aft rigged sail whose luff is affixed to a stay running forward (and most often but not always downwards) from a mast to the deck, the bowsprit or to another mast. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... Tack is a term used in sailing that has different meanings in different contexts. ... Bowsprit of the Falls of Clyde, showing the dolphin striker, the use of chain for the bobstays, and three furled jibs. ... Bow of the Cruise ship Spirit of Endeavour The bows of lifeboat 17-31 (Severn class) in Poole Harbour, Dorset, England The bow (pronounced to rhyme with how) is a nautical term that refers to the forward part of the hull of a ship or boat, the point that is... Look up deck in Wiktionary, the free dictionary. ... For other uses, see Spinnaker (disambiguation). ... A headsail is any sail set forward of the foremost mast of a sailing vessel. ...

On a boat with two staysails the inner sail is called the staysail, and the outer (foremost) is called the jib. This combination of two staysails is called a cutter rig (or a yankee pair) and a boat with one mast rigged with two staysails and a mainsail is called a cutter. A staysail is a fore-and-aft rigged sail whose luff is affixed to a stay running forward (and most often but not always downwards) from a mast to the deck, the bowsprit or to another mast. ... For other uses see cutter (disambiguation) An American-looking gaff cutter with a genoa jib set This French yawl has a gaff topsail set. ...

A fully rigged schooner has three jibs. The foremost one sets on the topmast forestay and is called the jib topsail, a second on the main forestay is called the jib, and the innermost is called the staysail. Actually, all three sails are both jibs and staysails in the generic sense. Two-masted fishing schooner A schooner (IPA: ) is a type of sailing vessel characterized by the use of fore-and-aft sails on two or more masts. ... On a sailing vessel, a forestay is a piece of standing rigging which keeps a mast from falling backwards. ...

A square-rigged ship typically has four jibs (though vessels with more or fewer exist). Starting from the inside, these sails are called: Main-mast of a square-rigged ship, with all square sails set except the course. ...

On boats with only one jib, it is common for the clew of the jib to be further aft than the mast, meaning the jib and mainsail overlap. An overlapping jib is called a genoa jib or simply a genoa (see illustration). A traditional ships mast, consisting of lower (ie Main-, Fore- or Mizzen-) mast, topmast and topgallant/royal mast. ... In sailing, the clew is the lower aft corner of the sail. ... A genoa (pronounced like the city, or as jenny) is a type of large headsail used on bermuda rigged craft, commonly the single-masted sloop and twin-masted boats such as yawl and ketch. ...

On cruising yachts with more than one jib, it is common for the innermost jib to be self-tacking, either by using a boom along the foot of the sail, or by cleating the jib sheet to a track, or both. On other cruising yachts, and nearly all racing sailboats, the jib needs to be worked when tacking. On these yachts, there are two sheets attached to the clew of the jib. As the yacht comes head to wind during a tack, the active sheet is released, and the other sheet (the lazy sheet) on the other side of the boat is pulled in. This sheet becomes the new active sheet until the next tack. This article or section needs copy editing for grammar, style, cohesion, tone and/or spelling. ... Tack is a term used in sailing that has different meanings in different contexts. ... In sailing, a boom is a spar (pole) usually made of aluminum or wood, is connected to the foot of the mainsail and allows the crew to control the angle of the sail to the wind. ... A gaff-rigged cutter flying a mainsail, staysail and genoa jib For other uses, see Sail (disambiguation). ... A digram showing three cleats. ... The piece of chain running diagonally up and right from the bottom-left of this picture to the upper of the two yards is the fore-lower-topsail sheet. ... In sailing, the clew is the lower aft corner of the sail. ... Points of sail is the term used to describe a sailing boats course in relation to the wind direction. ...

See also

Categories: Sailing vessels and rigging | Ship construction | Sailboat anatomy | Sailing ship elements | Nautical terms A lateen (from Latin) is a triangular sail set on a long yard mounted at an angle on the mast, and running in a fore-and-aft direction. ... A sail-plan is a formal set of drawings, usually prepared by a marine architect. ... A gaff-rigged cutter flying a mainsail, staysail and genoa jib For other uses, see Sail (disambiguation). ... This article is about the convenience store. ... To meet Wikipedias quality standards, this article or section may require cleanup. ... In sailing, a course sail is the principal sail on a mast. ... A driver is a kind of sail used on some sailboats. ... In sailing, an extra is a sail that is not part of the working sail plan. ... A genoa (pronounced like the city, or as jenny) is a type of large headsail used on bermuda rigged craft, commonly the single-masted sloop and twin-masted boats such as yawl and ketch. ... A gennaker is a downwind sail that can be described as a cross between a genoa and a spinnaker. ... A vessel (xebec) with three lateens Dhow with lateen sail in bad tack with the sail pressing against the mast, in Mozambique. ... A mainsail is the most important sail raised from the main (or only) mast of a sailing vessel. ... A moonsail, sailing on the moon also known as a moonraker or hope-in-heaven, is a sail flown immediately above the skysail (see sail-plan) on the very top of the royal mast on large, square rigged sailing ships. ... A royal is a sail flown immediately above the topgallant, below the skysail on the royal mast on square rigged sailing ships. ... A moonsail, also known as a skysail or moonraker, is a sail flown immediately above the royals (see sail-plan) on large, square rigged sailing ships. ... A spanker is either of two kinds of sail. ... For other uses, see Spinnaker (disambiguation). ... A form of sailing rig mainly employed on the Thames Sailing Barge, which uses two similarly sized spars to form the framework for the sail area. ... A staysail is a fore-and-aft rigged sail whose luff is affixed to a stay running forward (and most often but not always downwards) from a mast to the deck, the bowsprit or to another mast. ... USS Monongahela with a full set of studding sails set A studding sail or studsail is a sail used to increase the sail area of a square rigged vessel in light winds. ... A spanker is either of two kinds of sail. ... On a square rigged sailing vessel, a topgallant sail is the square-rigged sail or sails immediately above the topsail or topsails. ... A topsail is a sail set above another sail; on square-rigged vessels further sails may be set above topsails. ... A small fore-and-aft sail hoisted abaft the foremast and mainmast in a storm to keep a ships bow to the wind. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... Polyethylene terephthalate (aka PET, PETE or the obsolete PETP or PET-P) is a thermoplastic polymer resin of the polyester family and is used in synthetic fibers; beverage, food and other liquid containers; thermoforming applications; and engineering resins often in combination with glass fiber. ... Kevlars molecular structure; BOLD: monomer unit; DASHED: hydrogen bonds. ... Chemical structure of Kevlar. ... In sailing, a boom is a spar (pole) usually made of aluminum or wood, is connected to the foot of the mainsail and allows the crew to control the angle of the sail to the wind. ... Bowsprit of the Falls of Clyde, showing the dolphin striker, the use of chain for the bobstays, and three furled jibs. ... Dolphin striker is a small vertical spar attached under the bowsprit to provide support for it and the jib boom. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... Gaff rig is a sailing rig in which the mainsail is a four-cornered fore-and-aft rigged sail controlled at its head by a spar called the gaff. ... First Navy Jack being raised on a jackstaff A jackstaff is a small vertical spar (pole) in the bow of a ship, on which a particular type of flag, know as a jack, is flown. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... Jury rigging (or jerry rigging) refers to makeshift repairs or substitutes, made with only the tools and materials that happen to be on hand. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... A masthead truck is a nautical term for a wooden cap at the top of a mast, with holes in it through which halyards are passed. ... A spinnaker pole being used to set a conventional symmetric spinnaker A spinnaker pole is a spar used in sailboats (both dinghys and yachts) to help support and control a variety of headsails, particularly the spinnaker. ... A traditional ships mast, consisting of lower (ie Main-, Fore- or Mizzen-) mast, topmast and topgallant/royal mast. ... The fore royal yard on the Prince William. ... On a sailing vessel, a backstay is a piece of standing rigging which runs from the mast to the transom of the boat, counteracting the forestay and jib. ... In sailing, a block is a pulley or a number of pulleys enclosed in sheaves so as to be fixed to the end of a line or to a spar or surface. ... A boom vang is an item of rigging in a sail-powered vessel (usually small ones, but it is sometimes found on larger ones as well). ... The starboard main-brace and main-topsail-braces are clearly visible over the sea in this photo of the Prince Williams bridge and stern deck from her masthead. ... Clewlines and buntlines are lines used to handle the sails of a square rigged ship. ... A digram showing three cleats. ... A clevis pin inside a shackle A clevis pin is a type of fastener that will allow rotation of the connected parts about the axis of the pin. ... Clewlines and buntlines are lines used to handle the sails of a square rigged ship. ... In sailing, a cunningham or cunninghams eye is a type of downhaul used on a Bermuda rigged sailboat to change the shape of a sail. ... The downhaul is a line (or rope) which is part of the rigging on a sailboat; it applies downward force on a spar or sail. ... On a sailing vessel, a forestay is a piece of standing rigging which keeps a mast from falling backwards. ... A gasket holding the main-royal on a modern square-rigged training ship. ... Categories: Move to Wiktionary | Stub ... A guy is a term for a line (rope) attached to and intended to control the end of a spar on a sailboat. ... In sailing, a halyard is a line (rope) that is used to hoist (pull up) a sail or a yard to which a sail has been attached (bent on). ... This page is a candidate for speedy deletion. ... Parrel beads (also spelled parral[1] or parrell) are an element of sailing rigging, usually deployed at the jaws of a gaff on a gaff rigged or gunter rigged craft[2], or on the tack of a spinnaker rigged over a furled jib[3]. A set of parrel beads is... In sailing, the peak halyard (or peak for short) is a line that raises the end of a gaff further from the mast, as opposed to the throat halyard which raises the end nearer to the mast. ... A Preventer is a mechanical device on a sailing vessel which limits the booms ability to swing dangerously across the boat during an accidental gybe. ... Ratlines, pronounced rattlins, are lengths of thin line tied between the shrouds of a sailing ship to form a ladder. ... Running rigging is the term for the rigging of a sailing vessel that is used for raising, lowering and controlling the sails - as opposed to the standing rigging, which supports the mast and other spars. ... A shackle is a U-shaped piece of metal secured with a pin or bolt across the opening, or a hinged metal loop secured with a quick-release locking pin mechanism. ... On a sailing boat, the standing rigging is that collection of lines which are fixed. ... The piece of chain running diagonally up and right from the bottom-left of this picture to the upper of the two yards is the fore-lower-topsail sheet. ... On a sailboat, the shrouds are pieces of standing rigging which hold the mast up from side to side. ... On a sailing ship, stay mouse refers to the bulge in a part of the standing rigging called a stay. ... Stays are the heavy ropes on sailing vessels that run from the masts to the hull. ... In sailing, the throat halyard (or throat for short) is a line that raises the end of a gaff nearer to the mast, as opposed to the peak halyard which raises the end further from the mast. ... The topping lift (more rarely known as an uphaul) is a line which is part of the rigging on a sailboat; it applies upward force on a spar or boom. ... A 49er with both skipper and crew on the trapeze In Sailing, the trapeze refers to a wire that comes from a point high on the mast, usually where the shrouds are fixed, to a hook on the crew members harness at approximately waist level. ...