|
A jibe or gybe is when a sailing boat (yacht) turns its stern through the wind, such that the direction of the wind changes from one side of the boat to the other. The term wearing ship is used in square-rigged ships for jibing, but involves bringing the ship before the wind with braces carefully controlling the sails. Aft of the Soleil Royal, by Jean Bérain the Elder. ...
The other way to change the side of the boat that faces the wind tack is turning the bow of the boat through the direction of the wind. Tack is a term used in sailing that has different meanings in different contexts. ...
The bow is the foremost point of the hull of a ship or boat: the point that is ahead when the vessel is underway. ...
Spelling
While jibe and gybe are both acceptable spellings of the term, gybe is the more common spelling in British English, while jibe is the more common spelling in American English. British English (BrE) is a broad term used to distinguish the forms of the English language used in the United Kingdom from forms used elsewhere. ...
For other uses, see American English (disambiguation). ...
Use of jibing Jibing is a less common technique than tacking, as a sailboat can sail straight downwind, whereas they cannot sail directly into the wind, but have to tack or sail zig-zagged at alternating angles away from the wind direction. However, many sailboats are significantly faster sailing on a broad reach than running (sailing straight downwind), so the increased speed of a zig-zag course of alternating broad reaches can make up for the extra distance it takes over a straight downwind course. The sailboat will execute a jibe manueuver when it changes course as it zig-zags downwind. Jibing is also used commonly in races, which often use a triangular course marked with buoys; the most direct way of rounding a buoy may be to jibe. A jibe can generally be completed more quickly than a tack because the boat never turns into the wind, and thus a jibing boat's sails are always powered where a tacking boat's sails are unpowered as the bow crosses into the direction of the wind. Tack is a term, that depending on its application has several different meanings. ...
Points of sail is the term used to describe a sailing boats course in relation to the wind direction. ...
Points of sail is the term used to describe a sailing boats course in relation to the wind direction. ...
Because of the dangers in jibing, warning the crew is important. The phrase "ready to jibe" is usually used to let a prepared crew take necessary action. The phrase "jibe ho" is the common phrase when the helmsman actually applies rudder action to change direction.
When running (sailing nearly directly downwind), one may jibe the mainsail on the opposite side of the boat from the foresail. This keeps both sails exposed to the wind, and allows wind to spill from the mainsail to the foresail, resulting in more efficient use of wind. This technique is sometimes referred to as running "goose-winged", "gull-winged", or "wing and wing". When running wing and wing, a spinnaker pole or whisker pole is often used to hold the clew of the foresail out to the windward side of the boat. A mainsail is the most important sail raised from the main (or only) mast of a sailing vessel. ...
A foresail refers to one of several types of sail set on the foremost mast (foremast) of a sailing vessel: Any triangular sail set forward of the foremast, such as a jib. ...
A spinnaker pole is a spar used in sailboats (both dinghys and yachts) to help support and control a variety of headsails, particularly the spinnaker. ...
Dangers inherent in jibing A jibe can be a dangerous operation in a fore-and-aft rigged boat because, as the direction of the wind crosses the boats centline, the "old" leeward side of the mainsail and boom suddenly becomes the new windward side, and the sails are always fully exposed to the wind. Load on the sail and mainsheet can remain high througout the manuver, and if uncontrolled, the boom and mainsail can swing across the deck with great force, injuring anyone standing in the path of the boom, the mainsheet or its tackle as they sweep across the boat. An uncontrolled boom slamming to the limit of its range may also put excessive stress on the rigging, and can break the boom or standing rigging, perhaps even bringing the mast down. A jibe can also result in a sudden change in the direction of heeling, which can cause unwary passengers or crew to lose their balance or even go overboard. Leeward is the side of a boat away from the direction where the wind is coming (i. ...
In sailing, a boom is a spar (pole) usually made of aluminum or wood, is connected to the foot of the mainsail and allows the crew to control the angle of the sail to the wind. ...
To reduce the dangers of jibing on a small boat, the boom is often sheeted in and guided across the boat by hand as the direction of the wind crosses the centerline of the boat, and then the mainsail is eased out to its new sailing position. On a larger boat the mainsheet is also tightened during the turn to limit the range of movement of the boom (see preventer). When jibing it is usually safer to sail nearly directly downwind briefly before and after the jibe and make a small boat direction change when jibing, so that there less heeling force on the boat during a jibe. Then you can continue a course change to higher points of sail(broad or beam reach)after the jibe is complete and crew relocated. Once on the new course the mainsheet is eased and/or trimmed mainsail. These techniques prevent the boom from swinging unexpectedly. In sailing, a sheet is a line (or rope) used to control how much wind a sail (or part of a sail) gathers. ...
A Preventer is a mechanical device on a sailing vessel which limits the booms ability to swing dangerously across the boat during an accidental gybe. ...
A mainsail is the most important sail raised from the main (or only) mast of a sailing vessel. ...
Accidental jibes may occur when sailing on a course that is running dead downwind if the wind catches the leeward side of the sail. When the wind direction crosses the centerline of the boat, and a jibe is not executed, the point of sail is refered to as "by the lee" When sailing "by the lee" the outer edge of the mainsail is facing slightly into the wind. Slight changes in the boat heading, rolling motion, or wind direction can cause an unexpected and surprizing jibe, suddenly and forcefully flipping the mainsail to the opposite side of the boat. Do not sail "by the lee" except for brief durations (such as to avoid an obstacle), and only when keeping the crew clear of the boom swing and the arc of the mainsheet sweep. See broach, Chinese gybe, death roll. Broaching is a sudden change in heading angle of a sailboat, caused by a number of wind/sail interactions. ...
The introduction to this article provides insufficient context for those unfamiliar with the subject matter. ...
Death roll is a term used by dinghy racing sailors to describe a capsize where the mast hits the water first with the boom and sail pointing outward, still catching the wind, causing the craft to rotate nose-first into the water. ...
When sailing dinghies in high winds, a boat can capsize shortly after a jibe due to helmsman error (loss of tiller control) or tripping over the centerboard. It is partly for this second reason that centerboards are often lifted while sailing downwind even in non-planing hulls. A team at the 2005 ISAF Team Racing World Championship narrowly avoids capsizing. ...
Alternatives to jibing The term chicken jibe refers to the process of turning a fore-and-aft rigged upwind and tacking through more than 180 degrees to avoid having to jibe on a downwind course. While much slower, this technique avoids the dangers of passing the boom across the boat under load. It is the opposite to the practice of wearing ship on a square-rigged vessel, in which the vessel jibes to avoid the dangers that square-rigged vessels face when tacking.
See also: Points of sail Points of sail is the term used to describe a sailing boats course in relation to the wind direction. ...
Broaching is a sudden change in heading angle of a sailboat, caused by a number of wind/sail interactions. ...
A team at the 2005 ISAF Team Racing World Championship narrowly avoids capsizing. ...
Points of sail is the term used to describe a sailing boats course in relation to the wind direction. ...
Death roll is a term used by dinghy racing sailors to describe a capsize where the mast hits the water first with the boom and sail pointing outward, still catching the wind, causing the craft to rotate nose-first into the water. ...
Heeling is the angular rotation or lean caused by the winds force on the sails of a sailing boat or a sailing ship. ...
In sailing, hiking is the action of moving the sailors body weight as far to windward (upwind) as possible, in order to counteract the force of the wind pushing sideways against the boats sails. ...
Points of sail is the term used to describe a sailing boats course in relation to the wind direction. ...
A Musto Skiff, planing on a fast reach A planing boats hull skims across the surface of the water rather than pushing through the water in the way a traditional displacement hull works. ...
Points of sail is the term used to describe a sailing boats course in relation to the wind direction. ...
Points of sail is the term used to describe a sailing boats course in relation to the wind direction. ...
Reefed mainsail on a Bavaria 36 yacht, genoa fully rolled up. ...
Tack is a term used in sailing that has different meanings in different contexts. ...
A 49er with both skipper and crew on the trapeze In Sailing, the trapeze refers to a wire that comes from a point high on the mast, usually where the shrouds are fixed, to a hook on the crew members harness at approximately waist level. ...
See also Wikimedia Commons has media related to: jibe |
Feeds |
Contact