|
McGard Lug Nuts (173 words) |
 | Lug Nuts are for multi-fit custom replacement steel wheels having an oval slotted hole where the wheel stud passes through the wheel. |
| Lug Nuts are for use with custom replacement cast or forged aluminum wheels that are between 11/16" and 7/8" thick at the stud hole. |
| Lug Nuts are for use with custom replacement cast or forged aluminum wheels that are at least 7/8" thick, but less than 1-1/4" thick at the stud hole. |
| Tires & Wheels/Lug Nuts (774 words) |
| A rim which uses ACORN lug nuts has TAPERED HOLES, wider on the outside of the rim, tapering at an angle matching the taper on the lug nut to a smaller diameter on the inside of the rim. |
| The lug nuts on the Hummer are compressed to produce a resistance thread. |
| Lug nuts should be snug but not difficult to hand turn, but they do "stretch" after being torqued a few times which can make them very tough to get on and off (especially with a manual wrench...in the field), and it's a good idea to replace them at regular intervals. |
Feeds |
Contact