|
The Mazda B engine family is a four cylinder SOHC and DOHC engine family ranging from 1.1 L to 1.8 L. It was nodesigned for front-wheel drive economy car applications but was later modified for the turbocharged full-time 4WD 323 GTX and rear-wheel drive Miata as well as numerous other models. Mazda Motor Corporation ) (TYO: 7261 ) is a Japanese automobile maker based in Hiroshima, Japan. ...
The straight-4 or inline-4 is an internal combustion engine with four cylinders aligned in one row. ...
Single overhead cam (also SOHC) refers to the internal combustion engine design where one camshaft is located above the valves. ...
A double overhead cam (also called a dual overhead cam, DOHC, or twincam) engine is a type of internal combustion engine where the camshafts that operate the intake and exhaust valves are mounted above the cylinders, and where there are separate camshafts for inlet and exhaust valves. ...
Turbocharger Cut-away A turbocharger is a device used in internal-combustion engines to increase the power output of the engine by increasing the mass of oxygen and fuel entering the engine. ...
Four wheel drive or 4x4, is a type of four wheeled vehicle drivetrain configuration that enables all four wheels to receive power from the engine simultaneously in order to provide maximum traction. ...
It has been suggested that this article or section be merged into Mazda Familia. ...
The Mazda MX-5 is a popular sports car built by Mazda in Hiroshima, Japan. ...
B1
1.1L B1 - 1138 cc (59.2x78.3 mm) - came only as a SOHC 8-valve. It was available in the 1987-1989 Mazda 121 and later model Kia Pride in European and Asian markets. A fuel injected variant was used in select European market 1991-1995 Mazda 121s Single overhead cam (also SOHC) refers to the internal combustion engine design where one camshaft is located above the valves. ...
The Mazda 121 name has been used on different types of automobiles sold by Mazda of Japan since 1975. ...
The Kia Pride was a subcompact automobile produced from 1991 to 2000. ...
The Mazda 121 name has been used on different types of automobiles sold by Mazda of Japan since 1975. ...
B3 1.3 L B3 - 1324 cc (71x83.6 mm). It was available in SOHC and DOHC variants and was found in the Kia-built 1988-1993 Ford Festiva, the 1987-1989 Mazda Familia and the 1987-1989 Ford Laser, and 1994-1997 Ford Aspire. Later variants were used in the Mazda Demio microcar as late as 1999. A double overhead cam (also called a dual overhead cam, DOHC, or twincam) engine is a type of internal combustion engine where the camshafts that operate the intake and exhaust valves are mounted above the cylinders, and where there are separate camshafts for inlet and exhaust valves. ...
It has been suggested that Ford Aspire be merged into this article or section. ...
It has been suggested that multiple sections of Mazda 323 be merged into this article or section. ...
The Ford Laser was a small family car sold by Ford in Asia, Australasia, and parts of South America and Africa. ...
It has been suggested that this article or section be merged into Ford Festiva. ...
See also Mazda 121 for other cars using this name The Demio (also sold as the Mazda 121, Mazda Metro, Mazda2 and Ford Festiva Mini Wagon) is a small minivan or tall station wagon which debuted in 1996. ...
B5 1.5 L B5 - 1498 cc (78x78.4 mm) - The SOHC B5 upped the displacement to 1.5 L and was found in the rear-wheel drive 1977 Familia/GLC, the 1987-1989 Mazda Familia and the 1987-1989 Ford Laser. Later variants were used in the Kia Sportage, Ford Festiva and Mazda Demio microcar as late as 1999. It has been suggested that multiple sections of Mazda 323 be merged into this article or section. ...
It has been suggested that multiple sections of Mazda 323 be merged into this article or section. ...
The Ford Laser was a small family car sold by Ford in Asia, Australasia, and parts of South America and Africa. ...
2005 Kia Sportage The first generation Kia Sportage was produced as a conventional small SUV, but the second generation Sportage was produced as a crossover SUV. First generation (1995-2001) The first generation Sportage was a compact or toy sport-utility vehicle (SUV) which was based on a MAZDA BONGO...
It has been suggested that Ford Aspire be merged into this article or section. ...
See also Mazda 121 for other cars using this name The Demio (also sold as the Mazda 121, Mazda Metro, Mazda2 and Ford Festiva Mini Wagon) is a small minivan or tall station wagon which debuted in 1996. ...
B5 DOHC 1.5 L B5 - 1498 cc (78x78.4 mm) - A Japanese-only variant of the B5 with fuel injection and revised head/intake system. Found in the 1989-1994 Mazda Familia Interplay and Ford Laser S. Power output 81 kW (110 PS) at 6500 rpm and 12.9 kgf·m (127 N·m) at 5500 rpm. The kilowatt (symbol: kW) is a unit for measuring power, equal to one thousand watts. ...
SHP redirects here. ...
KGF is the short form of Kolar Gold Fields in Karnataka. ...
Newton metre is the unit of moment in the SI system. ...
B6 1.6 L B6 - 1597 cc (78x83.6 mm) - This was a bored-out version of the B3. The 8-valve SOHC B6 was found in the 1985-1989 Mazda 323, the 1988-1990 Mercury Tracer, and the 1990-1994 Mazda 323. The B6 produced 82 hp (61 kW). It has been suggested that this article or section be merged into Mazda Familia. ...
The Mercury Tracer was a compact Mercury car. ...
It has been suggested that this article or section be merged into Mazda Familia. ...
In Japan and Australia a fuel-injected version called the B6F was available.
B6-2E 1.6 L B6-2E - 1597 cc (78x83.6 mm), also known as B6-ME - This was a variant of the B6-E with a 16-valve cylinder head. It is found in the 1992-1994 California-spec Mazda 323 and 1992-1993 Mazda MX-3. The B6-ME produced 88 hp (66 kW) and 96 ft·lbf (130 N·m). It has been suggested that this article or section be merged into Mazda Familia. ...
The Mazda MX-3 was a nine-seat hatchback produced from September 1991 to 1998. ...
SHP redirects here. ...
In physics, a foot-pound force (symbol ft·lbf) is most of the time incorrectly abbreviated to foot-pounds, is from the English Engineering System and U.S. customary unit of mechanical work, or energy, although in scientific fields one commonly uses the equivalent metric unit of the joule (J). ...
B6T 1.6 L B6T - 1597 cc (78x83.6 mm) - The ubiquitous turbocharged, fuel-injected and intercooled 16-valve DOHC B6, released in 1985 and used in numerous models worldwide including the 323 GT-X, 1985-1989 Mazda Familia GT-X/GT/Infini, 1985-1989 Ford Laser TX3 turbo, and later Mercury Capris. This engine was most commonly found mated to a 4WD drivetrain although FWD models were also available. Power and torque outputs varied across markets due to emission and fuel standards, but the Japanese version of the B6T was the most powerful, producing 147 hp (110 kW) and 137 ft·lbf (186 N·m). Turbocharger Cut-away A turbocharger is a device used in internal-combustion engines to increase the power output of the engine by increasing the mass of oxygen and fuel entering the engine. ...
For the Australian rock group, see Intercooler_(band). ...
A double overhead cam (also called a dual overhead cam, DOHC, or twincam) engine is a type of internal combustion engine where the camshafts that operate the intake and exhaust valves are mounted above the cylinders, and where there are separate camshafts for inlet and exhaust valves. ...
It has been suggested that multiple sections of Mazda 323 be merged into this article or section. ...
The Ford Laser was a small family car sold by Ford in Asia, Australasia, and parts of South America and Africa. ...
The name Mercury Capri has been used for several different cars over the years. ...
B6D 1.6 L B6D - 1597 cc (78x83.6 mm) - The same strengthened and fuel-injected DOHC B6 as the B6T, but with no turbo, although gasket companys list B6-D as a non-turbo and turbo also. Most commonly found in the Japanese market Familias, Etudes and Lasers, this engine was also used in the 1991-1994 Mercury Capri and 1994-1996 Mazda MX-3. A double overhead cam (also called a dual overhead cam, DOHC, or twincam) engine is a type of internal combustion engine where the camshafts that operate the intake and exhaust valves are mounted above the cylinders, and where there are separate camshafts for inlet and exhaust valves. ...
The name Mercury Capri has been used for several different cars over the years. ...
The Mazda MX-3 was a nine-seat hatchback produced from September 1991 to 1998. ...
B6ZE(RS) 1.6 L B6ZE(RS) - 1597 cc (78x83.6 mm) - Developed for the Mazda Miata (1989-93). The engine uses a DOHC 16-valve alloy head with a lightened crankshaft and flywheel to allow a 7200 rpm redline. An aluminum sump with cooling fins is an unusual featue of this engine. The Japanese version of the engine had a 9.4:1 compression ratio and produced 120 hp (90 kW) and 100 ft·lbf (136 N·m). The Mazda MX-5 is a popular sports car built by Mazda in Hiroshima, Japan. ...
A double overhead cam (also called a dual overhead cam, DOHC, or twincam) engine is a type of internal combustion engine where the camshafts that operate the intake and exhaust valves are mounted above the cylinders, and where there are separate camshafts for inlet and exhaust valves. ...
B8 The 1.8 L (1839 cc) B8 is not just a bored and stroked B6. Rather, a new block with widened cylinder spacing is used. The bore was 83 mm and the stroke was 85 mm. This SOHC engine was used in various Australian Mazda 323s and the American 1990-1994 Mazda Protege. It came in both 8 (B8-E) and 16-valve variants (B8-ME). Single overhead cam (also SOHC) refers to the internal combustion engine design where one camshaft is located above the valves. ...
It has been suggested that this article or section be merged into Mazda Familia. ...
The Mazda 323 (called the Mazda Familia in Japan) was a subcompact car produced by Mazda in Japan between 1976 and 2003. ...
BP The 1.8 L (1839 cc) BP is a dual-overhead variant of the B8. It was first found in the 1989 Mazda Familia and American-market 1990 Mazda Protege LX. This engine was dubbed BP-ZE and featured a forged crankshaft, piston oil squirters, an aluminum baffled oil pan and is the first engine to featured Mazdas patented VICS (Variable Induction Control System) system. This particular variant can be found in the following vehicles: It has been suggested that multiple sections of Mazda 323 be merged into this article or section. ...
The Mazda 323 (called the Mazda Familia in Japan) was a subcompact car produced by Mazda in Japan between 1976 and 2003. ...
There is also a non-performance version that is most easily recognized by its black stamped-steel oil pan. It also features a cast crankshaft, no oil squirters, a plastic oil pickup tube and less aggressive camshafts. It is found in the 1995-1998 Mazda Protege ES. The Mazda 323 (called the Mazda Familia in Japan) was a subcompact car produced by Mazda in Japan between 1976 and 2003. ...
It has been suggested that this article or section be merged into Mazda Familia. ...
The Ford Escort was a compact car manufactured by the Ford Motor Company from 1967 through 2003. ...
The Ford Escort was a compact car manufactured by the Ford Motor Company from 1967 through 2003. ...
The Kia Sephia (known as the Mentor in some markets) was a family car manufactured by Kia of South Korea from 1994 to 2004. ...
It has been suggested that multiple sections of Mazda 323 be merged into this article or section. ...
The Mazda MX-5 is a popular sports car built by Mazda in Hiroshima, Japan. ...
The Mazda 323 (called the Mazda Familia in Japan) was a subcompact car produced by Mazda in Japan between 1976 and 2003. ...
BPT The BPT is a turbocharged and intercooled variant of the BP. It produced 179 hp (134 kW) and 174 ft·lbf (237 N·m) of torque. A detuned variant of the BPT with considerably less power (due to fuel standards) was sold in Australia. Turbocharger Cut-away A turbocharger is a device used in internal-combustion engines to increase the power output of the engine by increasing the mass of oxygen and fuel entering the engine. ...
For the Australian rock group, see Intercooler_(band). ...
The most powerful version was named the BPD. It is commonly known as the 'big turbo' variant as it utilised a much larger IHI RHF6CB turbocharger. The BPT was used as the basis for the engine, with changes such as sodium filled exhaust valves, larger (and front mounted) intercooler, bigger fuel injectors and stronger engine internals helping to up the performance of the engine to produce 206 hp (154 kW) and 184 ft·lbf (250 N·m). This engine was designed to power Mazda to a world rally championship win, and was thus used in the limited production Mazda Familia GT-R (2200 built) and GTAe (300 built). It has been suggested that multiple sections of Mazda 323 be merged into this article or section. ...
Applications:
It has been suggested that multiple sections of Mazda 323 be merged into this article or section. ...
It has been suggested that multiple sections of Mazda 323 be merged into this article or section. ...
The Ford Laser was a small family car sold by Ford in Asia, Australasia, and parts of South America and Africa. ...
The Ford Laser was a small family car sold by Ford in Asia, Australasia, and parts of South America and Africa. ...
BP-4W The 1999 Miata uses a modified BP, the BP-4W, which replaces the old Hall Effect Cam Angle Sensor with a magnetic unit at the front and has an improved intake system. The United States 2004-2005 Mazdaspeed MX-5 turbo is based on this engine rather than the newer BP-Z3 and produces 178 hp (133 kW) and 166 ft·lbf (225 N·m) with slightly-reduced compression. Hall effect diagram, showing electron flow (rather than conventional current). ...
In physics, magnetism is a phenomenon by which materials exert an attractive or repulsive force on other materials. ...
In automotive engineering, an intake manifold or inlet manifold is a part of an engine that supplies the fuel/air mixture to the cylinders. ...
The Mazda Miata (sold as the Mazda MX-5 in Europe and Australia, and Eunos Roadster in Japan) is a convertible sports car made by Mazda since 1989. ...
Applications:
The Mazda MX-5 is a popular sports car built by Mazda in Hiroshima, Japan. ...
The Mazda Miata (sold as the Mazda MX-5 in Europe and Australia, and Eunos Roadster in Japan) is a convertible sports car made by Mazda since 1989. ...
In terms of internal-combustion, most often Turbo is short for turbine supercharger. ...
BP-Z3 In 2001, Mazda introduced the BP-Z3 (also called BP-VE) variant of the BP engine with S-VT variable valve timing on the intake side, but no more VICS. This was found in the 2001+ Miata. The Z family is an evolution of this engine. S-VT, or Sequential Valve Timing, is an automobile variable valve timing technology developed by Mazda. ...
Variable valve timing, or VVT, is a generic term for an automobile piston engine technology. ...
In automotive engineering, an intake manifold or inlet manifold is a part of an engine that supplies the fuel/air mixture to the cylinders. ...
VICS may stand for: Variable Length Intake Manifold Vehicle Information and Communication System This is a disambiguation page — a navigational aid which lists other pages that might otherwise share the same title. ...
The Mazda Z engine family is an evolution of the B family. ...
In Australia, a turbocharged version of this engine produced 201 hp (150 kW) and 206 ft·lbf (280 N·m) in the Mazda MX-5 SP. The United States 2004-2005 Mazdaspeed MX-5 turbo is a BP-4W, not a BP-Z3. Turbocharger Cut-away A turbocharger is a device used in internal-combustion engines to increase the power output of the engine by increasing the mass of oxygen and fuel entering the engine. ...
The Mazda MX-5 is a popular sports car built by Mazda in Hiroshima, Japan. ...
The Mazda Miata (sold as the Mazda MX-5 in Europe and Australia, and Eunos Roadster in Japan) is a convertible sports car made by Mazda since 1989. ...
Applications:
The Mazda MX-5 is a popular sports car built by Mazda in Hiroshima, Japan. ...
The Mazda MX-5 is a popular sports car built by Mazda in Hiroshima, Japan. ...
In terms of internal-combustion, most often Turbo is short for turbine supercharger. ...
See also Mazda makes both piston and Wankel rotary engines. ...
External links | 
Feeds |
Contact