The square shown above is 200 pixels by 200 pixels. To determine a monitor's PPI, measure the width and height, in inches, of the above square with a ruler. Dividing 200 by the measured width or height gives the monitor's horizontal or vertical PPI, respectively, at the current screen resolution.
Pixels per inch (PPI) or pixel density is a measurement of the resolution of a computer display, related to the size of the display in inches and the total number of pixels in the horizontal and vertical directions. This measurement is often referred to as dots per inch, though that measurement more accurately refers to the resolution of a computer printer. PPI may also be used to describe the resolution of an image scanner or digital camera; in this context, it is synonymous with samples per inch.
Typical circa-2000cathode ray tube computer displays are generally capable of 72 to 130 pixels per inch. For example, a display that is 11 inches wide by 8.5 inches high, capable of a maximum 1024 by 768 pixel resolution, can display about 93 PPI in both the horizontal and vertical directions. This figure is determined by dividing width (or height) of the display area in pixels, by width (or height) of the display area in inches. It is possible for a display's horizontal and vertical PPI measurements to be different. The apparent PPI of a monitor depends upon the screen resolution (that is, number of pixels) in use; a monitor in 800 by 600 mode has a lower PPI than the same monitor at 1024 by 768 mode. The dot pitch of a computer display determines the absolute limit of possible pixel density.
The measure of pixel density is useful for calibrating a monitor with a printer; software can use the PPI measurement to display a document at "actual size" on the screen.
PPI could also broadly describe the resolution, in pixels, of an image to be printed within a specified space. For instance, a 100x100-pixel image that is printed in a 1-inch square could be said to have 100 pixels per inch, regardless of the printer's DPI capability. Used in this way, the measurement is only meaningful when printing an image.
As a result, as the size increases, the pixelsperinch decrease because the same number of pixels are spread over a wider area.
There are problems printing with less than 200 pixelsperinch and with resampling to increase the number of pixels so youll have to experiment to see which works best for a particular image.
Pixels begin to show when the print is enlarged to a point where the dots perinch (dpi) fall too low.
Feeds |
Contact