|
To meet Wikipedia's quality standards, this article or section may require cleanup.
Please discuss this issue on the talk page, or replace this tag with a more specific message. Editing help is available.
This article has been tagged since August 2006.
 A gantry of British semaphore signals seen from the cab of a steam locomotive. Railway signalling is a system used on railways to control traffic safely, for example, to prevent trains from colliding. Trains are uniquely susceptible to collision because, running on fixed rails, they are not capable of avoiding a collision by steering away, as can a road vehicle; furthermore, trains cannot decelerate rapidly, and are frequently operating at speeds where by the time the driver/engineer can see an obstacle, the train cannot stop in time to avoid colliding with it. This necessity was at the base of the establishment of strict guidelines for time keeping and railway chronometers in 1891 by the general time inspector Webb C. Ball of Cleveland, Ohio, USA and in 1889 by the UK parliament passing the Regulation of Railways Act 1889 - a series of requirements on matters such as the implementation of interlocked block signalling and other safety measures as a direct result of the Armagh rail disaster in that year. Image File history File links Please see the file description page for further information. ...
It has been suggested that this article or section be merged into railway signalling. ...
Shortcut: WP:TP A talk page is a special Wikipedia page containing discussion about the contents of its associated subject page. ...
Image File history File links Download high resolution version (813x503, 154 KB) Summary (c) John Griffiths. ...
Image File history File links Download high resolution version (813x503, 154 KB) Summary (c) John Griffiths. ...
This article is about trains in rail transport. ...
// Physical collision Dynamics Deflection happens when an object hits a plane surface In physics, collision means the action of bodies striking or coming together (touching). ...
track Rail tracks are used on railways (or railroads), which, together with railroad switches (or points), guide trains without the need for steering. ...
Railroad chronometers (railroaders watches) were critical to the safe and correct operation of trains in the United States. ...
1891 (MDCCCXCI) was a common year starting on Thursday (see link for calendar). ...
Webb C. Ball was born in Fredericktown, Ohio, on October 6, 1847 and became a jeweller & watchmaker. ...
1889 (MDCCCLXXXIX) was a common year starting on Tuesday (see link for calendar). ...
As a result of the Armagh rail disaster, the UK Parliament passed a law, the Regulation of Railways Act 1889, which made continuous automatic brakes mandatory on British passenger railways, along with the block system of signaling and the interlocking of all main line points and signals. ...
The Armagh rail disaster happened on June 12, 1889 near Armagh, Northern Ireland. ...
In Australia, railway signalling is known as safeworking, perhaps due to the fact that not all safeworking systems involve signals.
Most forms of train control involve messages being passed from those in charge of the rail network or portions of it (e.g., a stationmaster) to the train crew; these are known as 'signals' and from this the topic of train control is known as 'signalling'.
Timetable operation
The simplest form of operation, in terms of equipment at least, is operation according to a timetable. Everything is laid down in advance and every train crew knows the timetable. Trains can only operate in pre-arranged time periods, during which they have 'possession' of the track and no other train can operate.
When trains are operating in opposing directions on a single-line railroad, meets are scheduled, where each train must wait for the other at a point they can pass. Neither is permitted to move until the other has arrived.
The timetable system has several disadvantages. The first is that there is no positive confirmation that the track ahead is clear; only that it should be clear. This system does not allow for breakdowns and other such problems. The timetable is set up in such a way that there should be sufficient time between trains for the crew of a broken-down or delayed train to walk back up the line far enough to set up warning flags, flares and the explosive devices known as detonators or torpedoes (UK and US practice, respectively) which alert a train crew to a blocked track ahead.
The second problem is the timetable system's inflexibility; trains cannot be added or delayed; trains cannot be rescheduled.
The third is a corollary of the second; the timetable system is inefficient. To give a little flexibility, the timetable must give trains a broad swath of time to allow for some delay. Thus, the line is possessed by the train for much longer than is really necessary.
Nonetheless, this system permits operation on a vast scale, with no requirements for any kind of communication that travels faster than a train. Timetable operation was the normal mode of operation on American railroads in the early days.
With the advent of the telegraph, a more sophisticated system became possible because the telegraph provided the first system available where messages could be transmitted faster than the trains themselves. The telegraph allows the dissemination of alterations to the timetable, known as train orders. These override the timetable, allowing the cancellation, rescheduling and addition of trains, and almost anything else. Sufficient time must be given, however, so that all train crews can receive the changed orders. Train order operation is a system by which the railroads of North America conveyed operating instructions before the days of centralized traffic control and use of track warrants conveyed by radio. ...
Telegraphy (from the Greek words tele = far away and grapho = write) is the long distance transmission of written messages without physical transport of letters, originally over wire. ...
Train crews generally receive the orders at the next station at which they stop, or sometimes orders are handed up to a locomotive 'on the run' via a long staff. Train orders allowed train dispatchers to set up meets at sidings, force a train to wait at a siding for a priority train to pass from behind, and to keep at least one block spacing between trains going the same direction.
In North American railway traffic control, a "Y" (yellow) train order gave crews information about track speed (in areas where tracks and bridges needed repair). These were called "slow orders" by train crews. An "R" (red) order dealt with meets, waits and other important traffic control issuse. Orders were flagged at train stations by telegraph operators who signaled using a fixed "order board".
Timetable and train order operation was commonly used on American railroads until the 1960s, including some quite large operations such as the Wabash Railroad and the Nickel Plate Road. Train order traffic control was used in Canada until the late 1980s on the Algoma Central Railway and some spurs of the Canadian Pacific Railway. Categories: Rail stubs | Defunct railroad companies of the United States | Illinois railroads | Indiana railroads | Ohio railroads ...
Categories: Defunct railroad companies of the United States | Illinois railroads | Indiana railroads | Missouri railroads | New York railroads | Ohio railroads | Pennsylvania railroads ...
Timetable and train order was not used widely outside North America and has been phased out in favor of radio dispatching on many light-traffic lines and electronic signals on higher-traffic lines. More detail on North American operating methods is available below.
Blocks
 British lower-quadrant semaphore home signal (absolute block) with calling-on arm (permissive block) below If two trains cannot be running on the same section of track at the same time, then they cannot collide. This notion forms the basis of most signalling systems. Image File history File linksMetadata Download high-resolution version (2048x3072, 1837 KB)Source: http://www. ...
Image File history File linksMetadata Download high-resolution version (2048x3072, 1837 KB)Source: http://www. ...
The rail network is divided into sections, known as blocks. Two trains are not allowed to be in the same block at the same time. A train cannot enter a block until it is permitted, generally by a signal that the block ahead is empty.
On high-speed railways, block signalling has disadvantages because the required block length to safely stop a train would severely decrease the line's capacity. Also, signals become increasingly hard to spot and recognize at higher speeds. Several cab signalling systems have been developed to overcome those disadvantages. The European Train Control System will (at level 3) feature moving blocks that allow trains to follow each other at exact braking distance. Historically some lines operated rules where certain large high speed trains were signalled under differing rules and only given the right of way if two blocks in front of the train were clear. Japanese Shinkansen trains began the development of modern high-speed railways (shown here: West Japan Railway Company 500 Series Shinkansen at Kyoto) French-Belgian-German-Dutch Thalys train at Paris Gare du Nord station High-speed rail is public transport by rail at speeds in excess of 200 km/h...
Cab signalling refers to communication systems used by modern trains to send track status information to the train cab. ...
The European Train Control System (ETCS) is a signalling and control system designed to replace the 14 incompatible safety systems currently used by European Railways, especially on high-speed lines. ...
There are two distinct forms of block signalling. Absolute block signalling (as is required by UK law since 1889 for all passenger lines in the UK) is operated in a manner designed to ensure two trains may not occupy the same block at once. Telegraph codes are used to communicate between signal boxes, each of which controls a block. The signalman only allows entry to a given block when no train occupies the block. When the train traverses the block the signalman signals ahead to the next block who will accept the train if they have space or delay it otherwise. As an additional safety check all trains have a tail lamp. If no tail lamp is seen the signalman assumes his block is not empty after the train has passed as the lack of a tail lamp may indicate the train has come apart. Instead the block remains occupied and the signalman telegraphs the next signalbox to halt the train and investigate. 1889 (MDCCCLXXXIX) was a common year starting on Tuesday (see link for calendar). ...
In a permissive block system trains are permitted to pass signals indicating the line ahead is occupied, but only to do so in a manner where they can stop safely driving by sight. This allows improved efficiency in some situations and is mostly used in the USA, and in most countries is restricted to freight trains only, and may be restricted depending on the level of visability.
Permissive block working may also be used in an emergency, either when a driver is unable to get intouch with the signalman after being held at a danger signal for a specific time, although this is only allowed when the signal does not protect any conflicting moves, and also where the signaller is unable to get intouch with the next signalbox to make sure the previous train has passed, for example if the telegraph wires are down. In these cases, trains must proceed at very low speed (typically 20mph or less) and able to stop short of any obstruction, and in most cases it will not be allowed during times of poor visabilty (e.g fog or falling snow).
An absolute block system is itself not entirely absolute. Multiple trains may enter a block given specific authorisation. This is necessary in order to join trains together, split trains, rescue failed trains and the like. The signalman in giving authorization also ensures the driver knows precisely what to expect ahead, and the driver must operate the train in a safe manner considering this information. Generally, the signal will remain at danger, and the driver will be givern verbal authority, usually accompanied by a yellow flag, to pass the signal at danger, and the presence of the train in-front will be explained. At locations where trains regularly enter occupied blocks, such as stations where coupling up takes place, a second, smaller signal arm known as a "calling on" signal will be provided for these movements.
History of block signalling In the very early days of railways, on double-tracked railway lines, where trains travelled in one direction on the same stretch of track, a means was needed to space out the trains to ensure that they did not collide. In the very early days of railways, men (originally called 'policemen') were employed to stand next to the line at certain intervals with a stop watch, these men used hand signals to signal to train drivers that a preceding train had passed more or less than a certain number of minutes ago, this was called "time interval working". If a train had passed the man only a short while ago, the following train was expected to slow down or stop to allow sufficient space to develop between the trains, to prevent a collision. A wrist watch A watch is a small portable clock that displays the time and sometimes the day, date, month and year. ...
This system was flawed, however, as the watchman had no way of knowing whether the preceding train had cleared the tracks ahead. And so if the preceding train broke down or stopped for some reason, the following train would have no way of knowing, and collide with it rear-on. Accidents of this type were common in the early days of railways. However, with the invention of the electrical telegraph, it became possible for the station or signal box ahead to send a message (usually a bell ring) back to confirm that a train had passed and that the line ahead was clear; this was called the "block system". It has been suggested that this article or section be merged into Telegraphy. ...
To meet Wikipedias quality standards, this article or section may require cleanup. ...
A bell is a simple sound-making device. ...
Mechanical semaphore signals replaced hand signals in the early 1840s. When the all-clear message was received, a signalman in a signal box would pull a lever which would move the signal into the all-clear position. This required the placing of signal boxes at regular intervals along the line. // Events and Trends Technology First use of general anesthesia in an operation, by Crawford Long The first electrical telegraph sent by Samuel Morse on May 24, 1844 from Baltimore to Washington, D.C.. War, peace and politics First signing of the Treaty of Waitangi (Te Tiriti o Waitangi) on February...
The block system came into use gradually during the 1850s and 1860s but became mandatory in the United Kingdom after Parliament passed legislation in 1889 as a response to numerous railway accidents, particularly Armagh. This required block signalling for passenger railways, along with interlocking and most of the practices still required and used today. Similar legislation was passed by the United States around the same period. // Events and Trends Technology Production of steel revolutionised by invention of the Bessemer process Benjamin Silliman fractionates petroleum by distillation for the first time First transatlantic telegraph cable laid First safety elevator installed by Elisha Otis Science Charles Darwin publishes The Origin of Species, putting forward the theory of evolution...
// Events and trends Technology The First Transcontinental Railroad in the United States is built in the six year period between 1863 and 1869. ...
The Parliament of the United Kingdom of Great Britain and Northern Ireland is the supreme legislative body in the United Kingdom and British overseas territories. ...
1889 (MDCCCLXXXIX) was a common year starting on Tuesday (see link for calendar). ...
The Armagh rail disaster happened on June 12, 1889 near Armagh, Northern Ireland. ...
Not all blocks are signalled using fixed signals placed along the track. On single line railways in the UK, particularly those with low usage, it is common to use token systems that rely upon the physical possession of a unique object by a train's driver as authority to occupy the single line. On railways, a token (also staff or tablet, depending on its shape) is a physical object which a locomotive driver is required to have before entering onto a particular section of single track. ...
Interlocking Signals Timetable and train order operation still has some significant flaws, such as an over-reliance on the ability of the crew of a stranded train to let other trains know of the problem, and a general intolerance for human error. When everything goes perfectly it works well, but mistakes are easy and deadly.
Timetable and train order is only suitable for railway lines which carry relatively little traffic, and is unworkable on busy rail lines because it requires great separation between trains. Where this is the case, physical signals need to be used (either mechanical semaphore signals, or - more commonly in the modern era - electric light signals) to show the train crew whether the line ahead is occupied and to ensure that sufficient space is kept between trains to allow them to stop. A signal is a mechanical or electrical device that indicates to train drivers information about the state of the line ahead, and therefore whether he or she must stop or may start, or instructions on what speed the train may go. ...
Track circuits and signal blocks One of the basic components of most signalling systems is the track circuit. The track at either end of the block is electrically insulated, and electrical current from a battery or power supply is fed to both running rails at one end of the block. A relay at the other end is connected to both rails. When the block is unoccupied, the circuit is completed, and the relay is energized. However, when a train passes a signal and enters a block, the metal wheels and axle of the train short-circuit the current in the block, and the relay is de-energized. A track circuit is an electrical circuit used to detect the presence of a train. ...
Automotive style miniature relay A relay is an electrical switch that opens and closes under control of another electrical circuit. ...
A driving wheel on a steam locomotive. ...
An axle is a central shaft for a rotating wheel or gear. ...
This type of circuit is used to detect trains, both for the purpose of setting the signal indication and for providing various interlocking functions — for example, not permitting points to be moved when a train is standing on them. Electrical circuits are also used to prove switch points as being in proper position before a signal over them may be cleared. Modern UK trains carry electrical cables so that, in the event of a derailment fouling an adjacent track, the derailed train's guard can short-circuit the two rails of the adjacent track; this triggers danger signals on that track and can be used to prevent a collision with the derailed trains before the train's crew is able to contact the signalman.
When calculating the size of the blocks and hence the spacing between the signals, the following has to be taken into account:
- Line speed (the maximum speed the train is allowed to travel)
- Gradient (to compensate for the assistance or otherwise afforded to deceleration)
- The braking characteristics of the train(s) that travel on that line
- Sighting (the ability of the driver to see the signal)
- Reaction time (of the driver)
Safety systems The purpose of signalling is to inform the driver when it is safe to proceed on the line ahead. In early days the signalman was responsible for ensuring any points (US: switches) were set correctly before allowing a train to proceed. Mistakes were made and accidents occurred, sometimes with fatalities. The concept of interlocking of points, signals, and other appliances was introduced to improve safety. Interlocking prevents the signalman from operating appliances in an unsafe sequence, such as setting the signal to clear while one or more points in the route the signal governs are improperly set. Early interlocking systems used mechanical devices both to operate the signalling appliances and ensure their safe operation, but contemporary interlocking systems perform using complex electronic circuitry. It has been suggested that Railway Switching be merged into this article or section. ...
Interlocking in railway terminology (US) is a term used to describe an at-grade crossing or other junction of two or more railroads, or any railroad switching complex in which the switches and the signals controlling train movement over those switches is interlocked so that it is impossible to give...
A second area of safety concern was fog. Because of the propensity for heavy fog in some parts of the British Isles, fog signal rules were established on the UK railway system to keep train traffic moving without incurring the severe delays that would be necessary if drivers had to stop or travel slowly up to each signal and read its indication. During heavy fog, fogsignalmen would be stationed at distant signals with a lantern and detonators — small explosive charges that could be strapped to the rail to be exploded by the wheels of a train. The fogsignalman's duty was to repeat the indication of the signal using his lantern; the semaphore blade was usually obscured by fog and hence invisible to the driver of a moving train. If the distant signal were displaying Caution (warning that the home signal was at danger), the detonators remained on the rail and the fogsignalman would show a yellow lamp to show Caution; if the distant signal were clear, the detonators would be removed from the rails and a green lamp would be displayed. Overview In railway signalling, a distant signal (British English) or approach signal (US English) is a signal that repeats the aspects of a signal some distance ahead. ...
In railway signalling, a home signal (British English and sometimes in American English as well) or absolute signal (US English) is a signal that protects junctions, points (switches in American terminology), movable bridges platforms, or block sections. ...
In the UK all trains were required to carry detonators so that in the event of an incident (such as an emergency brake application) the train crew could place them on the line to warn any other train approaching from the rear or on any adjacent tracks.
Britain's Great Western Railway introduced the Automatic Train Control (ATC) system in 1906. This system is the forerunner of today's Automatic Warning System (AWS) and consists of an electrical system that sounded a bell in the cab as the train approached a signal at clear. Power was fed through a metal ramp to a pickup on the underside of the locomotive to power the bell. An absence of the electrical voltage on the ramp caused a warning horn to sound in the locomotive's cab. The driver then had a set time to acknowledge the warning and start braking his train accordingly. If the driver did not acknowledge the warning, the brakes would be applied automatically. This dic away with the need for fog signalling, since the driver could tell the state of the distant signal regardless of his ability to see it. The original Bristol Temple Meads station, first terminus of the GWR, is the building to the left of this picture The Great Western Railway (GWR) was a British railway company, linking South West England, the West Country and South Wales with London. ...
1906 (MCMVI) was a common year starting on Monday (see link for calendar). ...
The Automatic Warning System (AWS) refers to the specific form of limited cab signalling introduced in 1948 in the United Kingdom to help train drivers observe and obey warning signals, yellow or green. ...
The current system of AWS in use on Britain's railways is similar in principle to the Great Western's ATC but does not rely on physical contact between a ramp and the train; instead an inductive system is used. The most recent train control systems use modern electronic systems to indicate the state of the signals ahead to the driver on cab displays at all times and can halt a train automatically if a signal is passed at danger.
The railroads of the United States use systems of different designs; some systems are similar in behavior to AWS wherein they provide warnings only in conjunction with fixed signal locations. Other systems provide a continuous in-cab signal indication.
Colour light signals Main article: Railway signal A signal is a mechanical or electrical device that indicates to train drivers information about the state of the line ahead, and therefore whether he or she must stop or may start, or instructions on what speed the train may go. ...
On most modern railways, detection of the train's position on the line and signal changing are done automatically, and colour-light signals have largely replaced mechanical ones.
Although signals vary widely between countries and even railways within a given country, a general guide to the lights displayed in a typical signal system would be:
- Green: Proceed at line speed. Expect to find next signal green or yellow.
- Yellow: Prepare for next signal to be at red.
- Red: Stop.
In the UK a variation of this is used whereby each set of signal lights has four lights in order from top down: yellow, green, yellow, red. The red and green signals are used as described, as is the lower yellow light. The upper yellow light is used to provide a 'double yellow' signal which serves as a warning that the next signal is at yellow, thus providing a warning of a red signal a further block in advance.
Double signalling is sometimes used; this is the method used in some areas of New South Wales, Australia. It derives from semaphore signalling. Two sets of lights are displayed, one above the other. The upper light is the condition at the current signal, and the lower is an indication of the aspect being shown the next signal. Some lights have a small lamp at the bottom; this is an indication to continue at low speed. Emblems: Floral - Waratah (Telopea speciosissima); Bird - Kookaburra (Dacelo gigas); Animal - Platypus (Ornithorhynchus anatinus); Fish - Blue Groper (Achoerodus viridis) Motto: Orta Recens Quam Pura Nites (Newly Risen, How Brightly You Shine) Slogan or Nickname: First State, Premier State Other Australian states and territories Capital Sydney Government Const. ...
The double signals indicate:
- green over green: continue
- green over yellow: caution, next signal at green over red
- green over red: caution, next signal at stop
- red over red: stop and stay stopped
- red over red with small lamp lit: low speed, 25 km/h.
Operation When a track in a signal block is occupied, the signal which the train has just passed automatically turns from green (or yellow) to red, the signal behind that one automatically turns yellow to warn following trains of the red signal, and the signals behind that one can show green.
If any train is following behind, the yellow signal will warn it to slow down in order to stop at the next signal. If, however, the train in front has passed into the next block, the following train will come across another yellow signal. If the train in front is travelling faster than the following train and clears two blocks, the following train will come across a green signal.
The genius of this relay-based track circuit system is its fail-safe mode of operation. If the relay accidentally becomes de-energized, it fails, or the circuit is otherwise disturbed, the track circuit's status and the potential for presence of a train are unknown. In all of these cases, the track circuit causes the associated signal to drop to red.
The track circuit is also used by signalmen to detect exactly where a train is on a line. In a signal box, a map of the stretch of track the signal box is controlling is usually put up on the wall (called a mimic panel), and when a train enters a particular block, a light representing that block on the map lights up to show the train's location. In the UK, in large signalboxes it is usually numbered with the train's headcode so that the signalman can see which train it is. Track circuits are also used to trigger automatic barriers (gates) on level crossings (grade crossings in U.S. usage). To meet Wikipedias quality standards, this article or section may require cleanup. ...
A headcode or train reporting number is used by railway staff in the United Kingdom to identify a particular train service. ...
The examples and perspective in this article or section may not represent a worldwide view. ...
Moving block signalling This is a system which uses computers to calculate a 'safe zone' behind each moving train, which no other train may enter. It depends on precise knowledge of where each train is and how fast it is moving. With Moving Block, lineside signals are unnecessary, and instructions are passed direct to the trains. It has the advantage of increasing track capacity by allowing trains to run much closer together.
Moving Block is in use on London's Docklands Light Railway and planned for future use on the Jubilee Line. It was supposed to be the enabling technology on the modernisation of Britain's West Coast Main Line which would allow the running of trains at a far higher maximum speed (140mph), but the technology was deemed not mature enough, considering the large number of junctions on the WCML, and the plan was dropped at much expense to the British taxpayer[citation needed]. It forms part of the European Rail Traffic Management System's level-3 specification for future European installation. The Docklands Light Railway (DLR) is a light rail public transport metro serving the redeveloped Docklands area of east London, England. ...
The Jubilee Line is a line on the London Underground, coloured silver grey on the Tube map. ...
The WCML running alogside the M1 motorway in Northamptonshire The West Coast Main Line (WCML) is one of the most important intercity railway lines in the United Kingdom, part of the British railway system. ...
Modern signaling in the U.S. U.S. railroads have historically used a far greater variety of signaling systems than other countries. There have never been national standards for signal appearance and operation, so each of the hundreds of rail lines developed its own signaling techniques.
As Trains magazine describes: Trains is a monthly magazine dedicated to trains and railroading and is the flagship publication of Kalmbach Publishing. ...
- This was no problem as long as crews stayed on home territory. But as roads merged, split, and spun off new short lines, and tenant operators such as Amtrak and regional commuter systems came into existence, train crews could find themselves on several different properties in the course of a work week.
- The creation of Conrail in 1976 out of the remains of a half-dozen bankrupt railroads only made things worse. It was hard enough to rationalize the systems of the constituent companies, let alone interact with other operators over the dense Northeastern U.S. rail network.
- After several years, the situation had become intolerable. Training costs were getting out of hand, because crews had to qualify separately on each road over which they might operate. Having to consult half a dozen rulebooks increased enormously the potential for a disastrous mistake.[1]
As railroad companies eventually began to standardize their rule books via industry-wide committees, the implementation of signal systems between railroads became, if not standardized, at least more similar. Different legacy systems still in use, however, mean that some signal indications can be shown in several different ways.
While each company is free to modify its operating practices (subject to the Code of Federal Regulations), there are three major groups of railroads that share rule books, and therefore, have similar operating practices. Major railroads on the East Coast have adopted the Northeast Operating Rules Advisory Committee (NORAC) rules. Most railroads west of the Mississippi River, as well as the Canadian Pacific Railway, use the General Code of Operating Rules (GCOR). All other Canadian railroads, including Canadian National, use the Canadian Rail Operating Rules (CROR). (Some railroads, including CSX and Norfolk Southern, still use proprietary rule books.) These rule books specify various methods of operation in both signaled territory and "dark territory," where manual methods of granting track authority must be used. The Code of Federal Regulations (CFR) is the codification of the general and permanent rules and regulations (sometimes called administrative law) published in the Federal Register by the executive departments and agencies of the Federal Government of the United States. ...
East Coast can refer to: East Coast of the United States East Coast hip hop East Coast Park East-coast liberal East Coast Railway East Coast Akalat East Coast bias East Coast Music Awards East Coast Bays East Coast Main Line East Coast Greenway East Coast Parkway East Coast Swing...
The Mississippi River, derived from the old Ojibwe word misi-ziibi meaning great river (gichi-ziibi big river at its headwaters), is the second-longest river in the United States; the longest is the Missouri River, which flows into the Mississippi. ...
The Canadian Pacific Railway (CPR; AAR reporting marks CP, CPAA, CPI), known as CP Rail between 1968 and 1996, is a Canadian Class I railway operated by Canadian Pacific Railway Limited. ...
CN redirects here, as its the most common usage of the abbreviation in Canada; for more uses, see CN (disambiguation). ...
Categories: Companies traded on NYSE | Railway companies of the United States | Alabama railroads | Connecticut railroads | Delaware railroads | Florida current railroads | Georgia railroads | Illinois railroads | Indiana railroads | Kentucky railroads | Louisiana railroads | Maryland railroads | Massachusetts railroads | Michigan railroads | Mississippi railroads | New Jersey railroads | New York railroads | North Carolina railroads | Ohio railroads | Pennsylvania...
Norfolk Southern Corporation (AAR reporting mark NS) NYSE: NSC is a US publicly-traded stock corporation based in Norfolk, Virginia. ...
Automatic Block Signals Automatic Block Signal, or ABS, systems consist of a series of signals that govern blocks of track between the signals. The signals are automatically activated by the conditions of the block beyond the signal. If a train is currently occupying a block, that block's signal will not allow a train in the previous block to proceed into the block, or will only allow it to proceed at a speed which allows the train to stop before colliding with the train or another object (also known as restricted speed).
Automatic block signals also detect the status of a following signal. If a signal is displaying a stop indication, the preceding signal will display an aspect that warns the train crew that the following signal may require the train to stop.
ABS systems detect track occupancy by passing a low-voltage current through the track between the signals and detecting whether the circuit is closed, open, or shorted. A train's metal wheels and axles will pass current from one rail to the other, thereby shorting the circuit. If the ABS system detects that the circuit is shorted between two signals, it understands that a train is occupying that block and will "drop" the signals (display a stop indication) on either side of that block to prevent another train from entering. ABS system electronics are also able to detect breaks in the rail or improperly-lined switches, which result in an open circuit. These will also cause the signal's aspect to drop, preventing any trains from entering the block and running the risk of bending, breaking, or overturning the rail and derailing or running through an improperly-lined switch.
Rule 251 Much of the trackage in the U.S. has been converted to double track, which allows two opposing trains to pass without one having to pull out and stop in a siding. Track under Rule 251 has two tracks, each with a designated "current of traffic" (much like a two-lane road). The track contains signals that operate similarly to ABS signals but that govern movement only in one direction. Like ABS signals, these signals are not controlled directly by the train dispatcher but are instead automatically activated by track occupancy. Rule 251 is mostly used in the dense northeastern United States.
Track Warrant Control In Track Warrant Control, or TWC, the train dispatcher issues "track warrants" via radio that authorize the train between two specified limits. The limits are often mileposts or stations. The track warrant may authorize a train to proceed to a station and "clear the main," or enter a siding so an oncoming train can pass. Generally, no more than one train or piece of equipment may be given the same or overlapping limits of authority, unless the movements will be made at restricted speed. While TWC is generally used in dark territory, it may be combined with ABS to enable more than one train to be given the same authority (although this generally only applies to trains moving in the same direction). This reduces the workload of the dispatcher and train crew, as new track warrants do not need to be copied every few minutes to ensure that following trains are not delayed due to running out of authority. Track warrants are systematized permissions used on some rail lines instead of or in addition to signals. ...
This article belongs in one or more categories. ...
Direct Traffic Control Direct Traffic Control, or DTC, is similar to TWC, except that the rail line is divided up into predefined blocks--somewhat similar to ABS blocks without the signals--and dispatchers authorize trains to proceed in a specified number of blocks. Only one train may occupy a stretch of authority (which may consist of a single block or a stretch of dozens) at any given time, unless movements are to be made at restricted speed. Like TWC, DTC may be combined with ABS in high-traffic areas to aid with train separation and safety. Direct Traffic Control (DTC) is a system for authorizing track occupancy used on some railroads instead of or in addition to signals. ...
Form D Control Form D Control System, or DCS, is a system similar to Track Warrant Control that is used by railroads subscribing to NORAC (Track Warrant Control is a GCOR term). The name comes from the form that train crews copy the authority on. A sample Form D is available here; line two is used to grant authority for occupying the track.
Centralized Traffic Control Many large or heavily-trafficked railways use Centralized Traffic Control, or CTC. In CTC, train dispatchers (called "control operators" on larger railroads) monitor the location of trains electronically using track circuits, direct traffic by controlling the indication of absolute signals, and efficiently arrange oncoming train meets by automatically lining electronically-operated ("dual controlled") switches to cause trains to enter sidings. In addition to absolute signals controlled by the dispatcher, CTC territory usually includes intermediate signals between the absolute signals that operate similarly to ABS signals. These signals help keep trains separated between absolute signals, which can often be dozens of miles apart. Centralized traffic control (CTC) is a signalling system used by railroads around the world. ...
Because of the electronics used (the signals, the electronic switches, and the communications infrastructure), CTC track is much more expensive to build and maintain than track used in other methods of operation. In other methods of operation, train crews must stop to line switches when entering a siding (and may often be required to line them back when the entire train has left the main track, causing members of the train crew to walk long distances, unless otherwise authorized by the train dispatcher). CTC also enhances safety, as it allows train dispatchers to monitor the movement of trains to ensure they do not overrun their authority and provides for detecting the condition of the track.
In the western United States, railroads have built large sections of multiple main track, but they are operated under CTC instead of Rule 251. This allows the dispatcher greater flexibility in managing traffic by having some trains "cross over" to the other main track to pass slower or stopped trains or allow access by trains moving in both directions to spurs and industries on both sides of the track. In some extremely high-density corridors, there may be three or even more CTC-controlled tracks in parallel.
Signaling enhancements Automatic Cab Signaling, or ACS, is often used as an overlay for ABS, Rule 251 and CTC. This system provides train crews with information about the next signal indication, even if the signal mast is not visible. Automatic Train Stop, or ATS, systems provide wayside inductors that, when activated, signal the train to apply its brakes. Automatic Train Control, or ATC, adds in-cab enforcement to these and will apply the brakes if a dangerous situation arises, such as when the next signal is displaying a stop indication but the engineer has not begun slowing the train. ATC is required on all U.S. rail lines that operate at more than 79 miles per hour. An automatic train stop is a system on a train that will automatically stop a train if certain situations happened (unresponsive train operator, earthquake, disconnected rail, train running over a stop signal, etc) to prevent accidents from happening. ...
Automatic Train Control (ATC) is a safety system for railways, ensuring the safe and smooth operation of trains on ATC-enabled lines. ...
A further enhancement designed to work in both signaled and dark territory is Positive Train Control, or PTC. This system is an overlay on the conventional methods of operation but also uses satellite-based tracking and computerized radio communication to verify the authority given to the train, current location of the train, the status of the next signal (if any), the position of switches (which will be equipped with a sensor and radio transmitter), and the location of any oncoming trains. As in ATC, if a dangerous situation arises, the system will apply the brakes.[2][3][4]
References - ^ "NORAC: Northeast Operating Rules Advisory Committee: A common rulebook for a diverse Northeast" by Martin Graetz, Trains May 1, 2006, retrieved August 16, 2006
- ^ Positive Train Control: Intelligent Railroad Systems, Federal Railroad Administration, retrieved August 16, 2006
- ^ Most Wanted List of Transportation Safety Improvements, National Transportation Safety Board, retrieved August 16, 2006
- ^ BNSF starts positive train control trial - North American Viewpoint, by William Vantuono, International Railway Journal, March, 2004, retrieved August 16, 2006
- Railroad's traffic control systems by Frank W. Brian, Trains May 1, 2006, retrieved August 16, 2006
- General Code of Operating Rules, Fifth Edition. Copyright 2005 General Code of Operating Rules Committee (modified by BNSF Railway Company)
See also A signal is a mechanical or electrical device that indicates to train drivers information about the state of the line ahead, and therefore whether he or she must stop or may start, or instructions on what speed the train may go. ...
Just as Australia has suffered from a gauge muddle, the different states have tended to go their own way regarding signalling practice. ...
Railway signals in Germany are regulated by the Eisenbahn-Signalordnung (ESO, railway signalling rules). ...
The signaling system used on the rail transport in Norway is regulated by the Regulations of December 4, 2001 no. ...
The signalling system used on standard gauge railway network in Sweden is based on the traditional mechanical semaphore signals. ...
The UK railway signalling system used across the majority of the United Kingdom railway network uses colour lights to tell the driver the status of the section of track ahead. ...
List of rail diagrams includes: Platforms Platforms Side Turnback 3EH.jpg East Hills Turnback Platforms Olympic Park Sydney. ...
An Automatic train protection system is a technical installation on railway lines and trains to ensure safe operation in presence of human failures. ...
Train speed optimization, also known as Zuglaufoptimierung, is a system that reduces the need for trains to brake and accelerate, resulting in smoother and more efficient operation. ...
External links |
Feeds |
Contact