NationMaster - Encyclopedia: Spar

In sailing, a spar is a round pole of wood or metal used on a sailing ship. In modern usage it almost always refers to the mast, but historically the term was also used for booms, gaffs, yards, etc. A spar is a round pole of wood or metal, used on a sailing ship. ... For either of the songs named Sailing, see Sailing (song). ... Timber in storage for later processing at a sawmill Timber is a term used to describe wood, either standing or that has been processed for useâ€”from the time trees are felled, to its end product as a material suitable for industrial useâ€”as structural material for construction or wood... This article is about metallic materials. ... INS Tarangini, the only sail ship currently in-service with the Indian Navy. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... In sailing, a boom is a spar (pole) usually made of aluminum or wood, is connected to the foot of the mainsail and allows the crew to control the angle of the sail to the wind. ... It has been suggested that this article or section be merged into Gaff rig. ... The fore royal yard on the Prince William. ...

Spars of all types are used in the rigging of sailing ships to resist compressive and bending forces, and to provide support for the sails. To meet Wikipedias quality standards, this article or section may require cleanup. ... Compressive stress is the stress applied to materials resulting in their compaction (decrease of volume). ... Figure 1. ... A gaff-rigged cutter flying a mainsail, staysail and genoa jib For other uses, see Sail (disambiguation). ...

Wooden ships from the age of sail often carried many extra spars of all types for repairs while at sea. The spar deck of a frigate was so named because it was used to carry spare spars. The age of sail is the period in which international trade and naval warfare were both dominated by sailing ships. ... This article is about the body of water. ... For the bird, see Frigatebird. ...

A gaff-rigged cutter flying a mainsail, staysail and genoa jib For other uses, see Sail (disambiguation). ... To meet Wikipedias quality standards, this article or section may require cleanup. ... In sailing, a course sail is the principal sail on a mast. ... A driver is a kind of sail used on some sailboats. ... In sailing, an extra is a sail that is not part of the working sail plan. ... A genoa (pronounced like the city, or as jenny) is a type of large headsail used on bermuda rigged craft, commonly the single-masted sloop and twin-masted boats such as yawl and ketch. ... A gennaker is a downwind sail that can be described as a cross between a genoa and a spinnaker. ... For other uses, see Jib (disambiguation). ... A vessel (xebec) with three lateens Dhow with lateen sail in bad tack with the sail pressing against the mast, in Mozambique. ... A mainsail is the most important sail raised from the main (or only) mast of a sailing vessel. ... A moonsail, sailing on the moon also known as a moonraker or hope-in-heaven, is a sail flown immediately above the skysail (see sail-plan) on the very top of the royal mast on large, square rigged sailing ships. ... A royal is a sail flown immediately above the topgallant, below the skysail on the royal mast on square rigged sailing ships. ... A sail-plan is a formal set of drawings, usually prepared by a marine architect. ... A spanker is either of two kinds of sail. ... For other uses, see Spinnaker (disambiguation). ... A form of sailing rig mainly employed on the Thames Sailing Barge, which uses two similarly sized spars to form the framework for the sail area. ... A staysail is a fore-and-aft rigged sail whose luff is affixed to a stay running forward (and most often but not always downwards) from a mast to the deck, the bowsprit or to another mast. ... USS Monongahela with a full set of studding sails set A studding sail or studsail is a sail used to increase the sail area of a square rigged vessel in light winds. ... On a square rigged sailing vessel, a topgallant sail is the square-rigged sail or sails immediately above the topsail or topsails. ... A topsail is a sail set above another sail; on square-rigged vessels further sails may be set above topsails. ... A small fore-and-aft sail hoisted abaft the foremast and mainmast in a storm to keep a ships bow to the wind. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... PETE redirects here. ... Technora is the brandname of Teijin Twaron for a aromatic copolyamid. ... Kevlars molecular structure; BOLD: monomer unit; DASHED: hydrogen bonds. ... Chemical structure of Kevlar. ... In sailing, a boom is a spar (pole) usually made of aluminum or wood, is connected to the foot of the mainsail and allows the crew to control the angle of the sail to the wind. ... Bowsprit of the Falls of Clyde, showing the dolphin striker, the use of chain for the bobstays, and three furled jibs. ... Dolphin striker is a small vertical spar attached under the bowsprit to provide support for it and the jib boom. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... Gaff rig is a sailing rig in which the mainsail is a four-cornered fore-and-aft rigged sail controlled at its head by a spar called the gaff. ... First Navy Jack being raised on a jackstaff A jackstaff is a small vertical spar (pole) in the bow of a ship, on which a particular type of flag, know as a jack, is flown. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... Jury rigging (or jerry rigging) refers to makeshift repairs or substitutes, made with only the tools and materials that happen to be on hand. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... A masthead truck is a nautical term for a wooden cap at the top of a mast, with holes in it through which halyards are passed. ... A spinnaker pole being used to set a conventional symmetric spinnaker A spinnaker pole is a spar used in sailboats (both dinghys and yachts) to help support and control a variety of headsails, particularly the spinnaker. ... A traditional ships mast, consisting of lower (ie Main-, Fore- or Mizzen-) mast, topmast and topgallant/royal mast. ... The fore royal yard on the Prince William. ... On a sailing vessel, a backstay is a piece of standing rigging which runs from the mast to the transom of the boat, counteracting the forestay and jib. ... In sailing, a block is a pulley or a number of pulleys enclosed in sheaves so as to be fixed to the end of a line or to a spar or surface. ... A boom vang is an item of rigging in a sail-powered vessel (usually small ones, but it is sometimes found on larger ones as well). ... The starboard main-brace and main-topsail-braces are clearly visible over the sea in this photo of the Prince Williams bridge and stern deck from her masthead. ... Clewlines and buntlines are lines used to handle the sails of a square rigged ship. ... A digram showing three cleats. ... A clevis pin inside a shackle A clevis pin is a type of fastener that will allow rotation of the connected parts about the axis of the pin. ... Clewlines and buntlines are lines used to handle the sails of a square rigged ship. ... In sailing, a cunningham or cunninghams eye is a type of downhaul used on a Bermuda rigged sailboat to change the shape of a sail. ... The downhaul is a line (or rope) which is part of the rigging on a sailboat; it applies downward force on a spar or sail. ... On a sailing vessel, a forestay is a piece of standing rigging which keeps a mast from falling backwards. ... A gasket holding the main-royal on a modern square-rigged training ship. ... Categories: Move to Wiktionary | Stub ... A guy is a term for a line (rope) attached to and intended to control the end of a spar on a sailboat. ... In sailing, a halyard is a line (rope) that is used to hoist (pull up) a sail or a yard to which a sail has been attached (bent on). ... This page is a candidate for speedy deletion. ... Parrel beads (also spelled parral[1] or parrell) are an element of sailing rigging, usually deployed at the jaws of a gaff on a gaff rigged or gunter rigged craft[2], or on the tack of a spinnaker rigged over a furled jib[3]. A set of parrel beads is... In sailing, the peak halyard (or peak for short) is a line that raises the end of a gaff further from the mast, as opposed to the throat halyard which raises the end nearer to the mast. ... A Preventer is a mechanical device on a sailing vessel which limits the booms ability to swing dangerously across the boat during an accidental gybe. ... Ratlines, pronounced rattlins, are lengths of thin line tied between the shrouds of a sailing ship to form a ladder. ... Running rigging is the term for the rigging of a sailing vessel that is used for raising, lowering and controlling the sails - as opposed to the standing rigging, which supports the mast and other spars. ... A shackle is a U-shaped piece of metal secured with a pin or bolt across the opening, or a hinged metal loop secured with a quick-release locking pin mechanism. ... On a sailing boat, the standing rigging is that collection of lines which are fixed. ... The piece of chain running diagonally up and right from the bottom-left of this picture to the upper of the two yards is the fore-lower-topsail sheet. ... On a sailboat, the shrouds are pieces of standing rigging which hold the mast up from side to side. ... On a sailing ship, stay mouse refers to the bulge in a part of the standing rigging called a stay. ... Stays are the heavy ropes on sailing vessels that run from the masts to the hull. ... In sailing, the throat halyard (or throat for short) is a line that raises the end of a gaff nearer to the mast, as opposed to the peak halyard which raises the end further from the mast. ... The topping lift (more rarely known as an uphaul) is a line which is part of the rigging on a sailboat; it applies upward force on a spar or boom. ... A 49er with both skipper and crew on the trapeze In Sailing, the trapeze refers to a wire that comes from a point high on the mast, usually where the shrouds are fixed, to a hook on the crew members harness at approximately waist level. ...