Tack is a term, that depending on its application has several different meanings. Many of these are related to sailing:

Look up Tack on Wiktionary, the free dictionary

Wikipedia does not have an article with this exact name. ... Wiktionary full URL is a sister project to Wikipedia intended to be a free wiki dictionary (including thesaurus and lexicon) in every language. ...

Sails and Rigging

In sailing, the tack is the lower corner of the sail's leading edge. On a sloop rigged sailboat, the mainsail tack is connected to the mast and the boom at the gooseneck. On the same boat, a foresail tack is clipped to the deck and forestay.

A sail is a surface intended to generate thrust by being placed in a wind; basically it is a vertically oriented wing. ... A sloop-rigged J-24 sailboat In sailing, a sloop is a vessel with a single mast on which is hoisted a fore-and-aft rigged mainsail and a single jib, plus extras such as a spinnaker. ... A mainsail is the most important sail raised from the main (or only) mast of a sailing vessel. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... There are several meanings of the word boom: a sound such as a sonic boom - onomatopoeia the sound of an explosion. ... Categories: Move to Wiktionary | Stub ... A foresail refers to one of several types of sail set on the foremost mast (foremast) of a sailing vessel: Any triangular sail set forward of the foremast, such as a jib. ... A permanent covering over a compartment or a hull[1]. On a boat or ship, the primary deck is the horizontal structure which forms the lid of the hull, which both strengthens the hull and serves as the primary working surface. ... On a sailing vessel, a forestay is a piece of standing rigging which keeps a mast from falling backwards. ...

See parts of a sail. A sail is a surface intended to generate thrust by being placed in a wind; basically it is a vertically oriented wing. ... This article is about the convenience store. ... This article is about the rigging of ships, and is based on the detailed article in the 1911 Encyclopedia Britannica, now in the public domain. ... In sailing, a course sail is the principal sail on a mast. ... A driver is a kind of sail used on some sailboats. ... In sailing, an extra is a sail that is not part of the working sail plan. ... A genoa (pronounced like the city, or as jenny) is a type of large jib-sail used on bermuda rigged craft, commonly the single-masted sloop and twin-masted yawl, less frequently on a ketch. ... A gennaker is a downwind sail that can be described as a cross between a genoa and a spinnaker. ... See also: Jib (television) A jib is a triangular staysail set ahead of the foremost mast of a sailing boat. ... A lateen (from Latin) is a triangular sail set on a long yard mounted at an angle on the mast, and running in a fore-and-aft direction. ... A mainsail is the most important sail raised from the main (or only) mast of a sailing vessel. ... Also known as a skysail or moonraker. ... A spanker is either of two kinds of sail. ... A spinnaker is a special type of sail that is designed specifically for sailing downwind (with the wind behind the boat). ... A staysail is a fore-and-aft rigged sail whose luff is affixed to a stay running forward (and most often but not always downwards) from a mast to the deck, the bowsprit or to another mast. ... USS Monongahela with a full set of studding sails set A studding sail or studsail is a sail used to increase the sail area of a square rigged vessel in light winds. ... A spanker is either of two kinds of sail. ... On a square rigged sailing vessel, a topgallant sail is the square-rigged sail or sails immediately above the topsail or topsails. ... A topsail is a sail set above another sail; on square-rigged vessels further sails may be set above topsails. ... A small fore-and-aft sail hoisted abaft the foremast and mainmast in a storm to keep a ships bow to the wind. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... The term plastics covers a range of synthetic or semi-synthetic organic condensation or polymerization products that can be molded or extruded into objects or films or fibers. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... Kevlar, also known as super steel crapTwaron and poly-paraphenylene terephthalamide, is a synthetic fibre that is five times stronger than steel, weight for weight. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ... The boom is a spar usually made of aluminum or wood which provides support to the foot of the mainsail. ... Bowsprit of the Falls of Clyde, showing the dolphin striker, the use of chain for the bobstays, and three furled jibs. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... In sailing, a gaff is the upper spar used to control a fore-and-aft sail set aft of the mast, such as a mainsail. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... On sailing ships, the jury rig is a replacement mast and yards improvised in case of loss of the original mast. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... mizzen mast, mainmast and foremast Grand Turk The mast of a sailing ship is a tall vertical pole which supports the sails. ... The word truck is used in various different ways in different varieties of English. ... A spinnaker pole is a spar used in sailboats (both dinghys and yachts) to help support and control a variety of headsails, particularly the spinnaker. ... The fore royal yard on the Prince William. ... On a sailing vessel, a backstay is a piece of standing rigging which keeps a mast from falling forewards. ... In sailing, a block is a pulley or a number of pulleys enclosed in sheaves so as to be fixed to the end of a line or to a spar or surface. ... A boom vang is an item of rigging in a sail-powered vessel (usually small ones, but it is sometimes found on larger ones as well). ... This page is a candidate to be moved to Wiktionary. ... link titleA clevis pin is a type of fastener that will allow rotation of the connected parts about the axis of the pin. ... This article is about the sailing term. ... The downhaul is a line (or rope) which is part of the rigging on a sailboat; it applies downward force on a spar or sail. ... On a sailing vessel, a forestay is a piece of standing rigging which keeps a mast from falling backwards. ... Categories: Move to Wiktionary | Stub ... A guy is a term for a line (rope) attached to and intended to control the end of a spar on a sailboat. ... In sailing, a halyard is a line (rope) that is used to hoist (pull up) a sail or a yard to which a sail has been attached (bent on). ... This page is a candidate for speedy deletion. ... Anatomy In anatomy, the throat is the part of the neck anterior to the vertebral column. ... One of the most dangerous things that can happen on a sailing boat, apart from falling overboard, is for someone to get caught up in the uncontrolled gybe of a sail. ... Running rigging is the term for the rigging of a sailing vessel that is used for raising, lowering and controlling the sails - as opposed to the standing rigging, which supports the mast and other spars. ... A shackle is a U-shaped piece of metal secured with a pin or bolt across the opening, or a hinged metal loop secured with a quick-release locking pin mechanism. ... On a sailing boat, the standing rigging is that collection of lines which are fixed. ... In sailing, a sheet is a line attached to the clew of a sail, and is the main control used in trimming the sail. ... On a sailboat, the shrouds are pieces of standing rigging which hold the mast up from side to side. ... On a sailing ship, stay mouse refers to the bulge in a part of the standing rigging called a stay. ... Stays are the heavy ropes on sailing vessels that run from the masts to the hull. ... Anatomy In anatomy, the throat is the part of the neck anterior to the vertebral column. ... An acrobat below a balloon Trapeze artists, in lithograph by Calvert Litho. ... diagram showing the names of the parts of a sail The lower edge of a triangular sail is called the foot of the sail, while the upper point is known as the head. ...

Manoeuvre

Also, a "tack" is the manoeuvre where a sailing boat (yacht) turns its bow through the wind so that the wind changes from one side to the other. Contrast this with a jibe which is turning the stern of the boat through the wind. In small boats with low booms, the skipper announces, "Ready about" to prepare the crew for the tack and the swinging of the boom, which can otherwise cause serious injury to an unprepared crew member. Upon the acknowledgement of the crew, the skipper announces, "Coming about" (or alternatively "Helm's a-lee", "Hard a-lee", or "Lee Ho") during the actual tacking. "Coming about" is an alternate term for "tacking".

Lobster boat A boat is a watercraft, usually smaller than most ships. ... A jibe (also spelled gybe) is when a sailing boat (yacht) turns its stern through the wind, such that the direction of the wind changes from one side of the boat to the other. ...

Broaching is a sudden change in heading angle of a sailboat, caused by a number of wind/sail interactions. ... Points of sail is the term used to describe a sailing boats course in relation to the wind direction. ... Death roll is a term used by laser dinghy sailors to describe a capsize where the mast hits the water first with the boom and sail pointing outward, still catching the wind, causing the craft to rotate nose-first into the water. ... Gybe (also spelled jibe) is when a sailing boat (yacht) turns its stern through the wind, such that the wind changes from one side of the boat to the other. ... Heeling is the angular rotation or lean caused by the winds force on the sails of a sailing boat or a sailing ship. ... Points of sail is the term used to describe a sailing boats course in relation to the wind direction. ... A jibe (also spelled gybe) is when a sailing boat (yacht) turns its stern through the wind, such that the direction of the wind changes from one side of the boat to the other. ... A Musto Skiff, planing on a fast reach A planing boats hull skims across the surface of the water rather than pushing through the water in the way a traditional displacement hull works. ... Points of sail is the term used to describe a sailing boats course in relation to the wind direction. ... Points of sail is the term used to describe a sailing boats course in relation to the wind direction. ... To reef the main sail means to reduce its sail area. ... A jibe (also spelled gybe) is when a sailing boat (yacht) turns its stern through the wind, such that the direction of the wind changes from one side of the boat to the other. ...

Heading

The wind is blowing from right to left.

Also "tack" describes the position of a sailboat's bow with respect to the wind. If the vessel's bow is positioned so that the wind is blowing across the starboard (right) side of the vessel, then the vessel is said to be on a starboard tack. If the wind is blowing across the port (left) side of the vessel, then the vessel is said to be on a port tack. A sailing vessel on a starboard tack always has the right of way over another sailing vessel on "port tack" by nautical convention. Image File history File links Right of Way at Sea showing Red and Green lights File history Legend: (cur) = this is the current file, (del) = delete this old version, (rev) = revert to this old version. ... Image File history File links Right of Way at Sea showing Red and Green lights File history Legend: (cur) = this is the current file, (del) = delete this old version, (rev) = revert to this old version. ... Starboard is the nautical term (used on boats and ships) that refers to the right side of a vessel, as perceived by a person facing forward (i. ... Port is the nautical term (used on boats and ships) that refers to the left side of a ship, as perceived by a person facing towards the bow (the front of the vessel). ... Right-of-way is a legal term which may have any of several meanings: the property along the sides of, and including, railroad tracks. ...

The colours of the lights on the other ship as seen by each helmsman explain the convention Red=Stop, Green=Proceed. Red is a color at the lowest frequencies of light discernible by the human eye. ... Look up Green on Wiktionary, the free dictionary Green is a color seen commonly in nature. ...

Stickiness

"Tack" is a technical term used in the printing process to represent the stickiness or adherence value of an ink as it applied to paper. In a similar usage "tack" would also describe the adherence property of a glue or adhesive. It can also represent the setting state of a glue. The folder of newspaper web offset printing press Printing is an industrial process for mass production of texts and images, typically with ink on paper using a printing press. ... Historically, glue only refers to protein colloids prepared from animal tissues, such as hide glue, bone glue, or fish glue. ... An adhesive is a compound that adheres or bonds two items together. ...

Nail

"Tack" is a type of nail. Nornally cut from sheet steel (as opposed to wire); the nail is used in upholstery, shoe making and saddle manufacture. The triangular shape of the nail's cross section gives greater grip and less tearing of materials such as cloth and leather compared to a wire nail.

Pin

A "Tack" is a pin or sewing stitch used to temporarily attach things together.

Cheap Goods

"Tack" or "tacky" also refers to cheap goods and possibly derives from the poor quality stitching (see Pin above) which causes the goods to fall apart prematurely.

Equestrian Equipment

"Tack" is the general term for equestrian equipment, horse tack or harness, that which is carried by the horse. Includes the saddle and bridle, and associated equipment. To tack up a horse is to place these objects on the horse in preparation for riding or similar activity. Tack is any of the various accessories worn by horses in the course of their use as domesticated animals. ... Equestrianism relates to the riding of horses. ... Tack is any of the various accessories worn by horses in the course of their use as domesticated animals. ... The term harness has been used for many centuries for part of the collection of equipment known as horse tack, essential in the domestic, military, and agrarian use of horses. ...