Veneer, in woodworking, refers to thin slices of wood, usually thinner than 3 millimetres (1/8 inch). Veneer layers are usually glued and pressed onto core panels of different materials (such as wood, particle board or medium density fiberboard) to obtain doors, tops and side panels for cabinets, parquet floors and pieces of furniture. They are also used in marquetry. Plywood is made up of a number of layers of veneer, each layer glued at right angles to the adjacent layers. Artists can use woodworking to create delicate sculptures. ... A millimetre (American spelling: millimeter), symbol mm is an SI unit of length that is equal to one thousandth of a metre. ... Mid-19th century tool for converting between different standards of the inch An inch is an Imperial and U.S. customary unit of length. ... Historically, glue only refers to protein colloid adhesives prepared from animal tissues, such as hide glue, bone glue, or fish glue. ... A clamp is a device to hold or secure an object, to prevent it from moving. ... A tree trunk as found at the Veluwe, The Netherlands Wood derives from woody plants, notably trees but also shrubs. ... Particle board is a material manufactured from wood particles (e. ... Medium-density fibreboard (MDF), is an engineered wood product formed by breaking down softwood into wood fibres, often in a defibrator, combining it with wax and resin, and forming panels by applying high temperature and pressure. ... The Doors self titled debut. ... Alternate meanings in cabinet (disambiguation) A Cabinet is a body of high-ranking members of government, typically representing the executive branch. ... Parquetry floor. ... Flooring is the general term for a permanent covering of a floor. ... Furniture is the collective term for the movable objects which support the human body (seating furniture and beds), provide storage, and hold objects on horizontal surfaces above the ground. ... Marquetry is the craft of forming a decorative panel of veneers composed of shaped sections of wood (sometimes including bone or ivory, turtle-shell (conventionally called tortoiseshell), mother-of-pearl or fine metals) and applying it to a structural carcass. ... Plywood was the first type of engineered wood to be invented. ...

Veneer is obtained by 'peeling' the trunk of a tree, which is the predominant area used for architectural veneers (see also inlay). The appearance of the grain, or "figure", in wood comes from slicing through the growth rings of a tree and depends upon the angle at which the wood is sliced. There are three main types of veneer slicing equipment used commercially: The coniferous Coast Redwood, the tallest tree species on earth A tree can be defined as a large, perennial, woody plant. ... // Scope and intentions According to the very earliest surviving work on the subject, Vitruvius De Architectura, good buildings satisfy three core principles: Firmness, Commodity, and Delight; architecture can be said to be a balance and coordination among these three elements, with none overpowering the others. ... Inlay: Decorative technique of inserting pieces of coloured materials to form patterns or pictures. ... Wood grain describes the alignment, texture and appearance of the wood fibres. ... Growth rings of Pinus taeda Growth rings can be seen in a horizontal cross section cut through the trunk of a tree. ...

• A rotary lathe in which the wood is turned against a very sharp blade and peeled off in one continuous or semi-continuous roll. Rotary cut veneer is mainly used for plywood as the appearance is not desirable.
• A slicing machine in which the flitch or piece of log is raised and lowered against the blade and slices of the log are made.
• A half round lathe in which the log or piece of log can be turned and moved in such a way to expose the most interesting parts of the grain.

Each slicing processes gives a very distinctive type of grain, depending upon the tree species. In any of the veneer slicing methods, when the veneer is sliced, a distortion of the grain occurs. As it hits the wood, the knife blade creates a "loose" side where the cells have been opened up by the blade, and a "tight" side. This article is about a lathe as a tool. ... A tree trunk as found at the Veluwe, The Netherlands Wood derives from woody plants, notably trees but also shrubs. ... For other uses of the word blade, see Blade (disambiguation) A blade is the flat part of a tool or weapon that (usually) has a cutting edge typically made of a metal, such as steel used to cut, thrust or strike like knife dagger sword sabre axe bayonet machete cleaver... Loggers on break, c. ... The coniferous Coast Redwood, the tallest tree species on earth A tree can be defined as a large, perennial, woody plant. ...

Traditionally, veneers were also sawn but this is more wasteful of wood. Veneering is an ancient art, dating back to the ancient Egyptians who used veneers in some of their furniture. Portable saw The article is about the cutting tool. ... ... Furniture is the collective term for the movable objects which support the human body (seating furniture and beds), provide storage, and hold objects on horizontal surfaces above the ground. ...