FACTOID # 104: In Ethiopia, nine out of ten births occur without skilled health staff present.
 
 Home   Encyclopedia   Statistics   Countries A-Z   Flags   Maps   Education   Forum   FAQ   About 
 
WHAT'S NEW
RECENT ARTICLES
More Recent Articles »
 

SEARCH ALL

FACTS & STATISTICS    Advanced view

Search encyclopedia, statistics and forums:

 

 

(* = Graphable)

 

 


Encyclopedia > Working fluid

Working mass is a mass against which a system operates in order to produce acceleration. All acceleration requires an exchange of momentum, which can be thought of as the "unit of movement". Momentum is related to mass and velocity, as given by the formula P = mv, where P is the momentum, m the mass, and v the velocity. The velocity of a body is easily changeable, but in most cases the mass is not, which makes it important. In rockets, the total velocity change can be calculated as follows:



Where:

  • v = ship velocity.
  • u = exhaust velocity.
  • M = ship mass, not including the fuel.
  • m = total mass ejected from the ship (working mass).


The term working mass is used primarily in the aerospace field. In more "down to earth" examples the working mass is typically provided by the Earth, which contains so much momentum in comparison to most vehicles that the amount it gains or loses can be ignored. However in the case of an aircraft the working mass is the air, and in the case of a rocket, it is the rocket fuel itself. Most rocket engines use light-weight fuels (liquid hydrogen, oxygen, or kerosene) accelerated to super-sonic speeds. However, ion engines often use heavier elements like mercury as the reaction mass, accelerated to much higher speeds using electric fields.


In most cases the working mass is separate from the energy used to accelerate it. In a car the engine provides power to the wheels, which then accelerates the Earth backward to make the car move forward. This is not the case for most rockets however, where the rocket fuel is the working mass, as well as the energy source. This means that rockets stop accelerating as soon as they run out of fuel, regardless of other power sources they may have. This can be a problem for satellites that need to be repositioned often, as it limits their useful life. In general, rocket fuels can provide more energy than they can use, which leads to a number of techniques designed to provide external working mass in order to carry a smaller fuel load. These air-augmented rockets are only useful on rockets that travel through the atmosphere, and have not been used in service.


See also rocket equation.


  Results from FactBites:
 
Fluid bearing - Wikipedia, the free encyclopedia (1087 words)
Fluid bearings, also called fluid dynamic bearings or hydrostatic or gas bearings, are bearings which support load on a thin layer of liquid or gas.
Fluid Bearings use a thin layer of liquid or gas fluid between the bearing faces, typically sealed around or under the rotating shaft.
Ice skates are a hydrodynamic fluid bearing where the skate and ice are separated by a layer of water caused by entropy (formerly thought to be caused by pressure-induced melting; see ice skating for details).
Class 415: ROTARY KINETIC FLUID MOTORS OR PUMPS / U.S. Patent Classification Definitions (11715 words)
The working fluid* in the device flows from a position outside and on one side of the cylinder through the blade row to a position inside the cylinder and then again through the blade row to a position outside and generally on the other side of the cylinder.
Apparatus in which a runner* is caused to rotate by action of working fluid* thereon comprising a cavity or chamber in the runner* fully closed or bounded by walls (runner* or casing*) and trapping working fluid* delivered thereto until the pocket registers with an exhaust conduit to discharge the working fluid* therefrom.
Apparatus comprising a fluid path between the normal working fluid* path and the interior part of an assembly which is positioned between two relatively moving apparatus parts (e.g., casing*, shaft*) the assembly service to (1) reduce or prevent unwanted working fluid* leakage between the parts, or (2) reduce the friction between the parts.
  More results at FactBites »


 

COMMENTARY     


Share your thoughts, questions and commentary here
Your name
Your comments
Please enter the 5-letter protection code

Want to know more?
Search encyclopedia, statistics and forums:

 


Lesson Plans | Student Area | Student FAQ | Reviews | Press Releases |  Feeds | Contact
The Wikipedia article included on this page is licensed under the GFDL.
Images may be subject to relevant owners' copyright.
All other elements are (c) copyright NationMaster.com 2003-5. All Rights Reserved.
Usage implies agreement with terms.