Early 20th century Alternator made in Budapest, Hungary, in the power generating hall of a hydroelectric station.

An alternator is an electromechanical device that converts mechanical energy to alternating current electrical energy. Most alternators use a rotating magnetic field but linear alternators are occasionally used. In principle, any AC generator can be called an alternator, but usually the word refers to small rotating machines driven by automotive and other internal combustion engines. Download high resolution version (704x601, 89 KB) Alternators made in Budapest, Hungary, in the power generating hall of a hydroelectric station in Iolotan on the Murghab River Early color photograph from Russia, created by Sergei Mikhailovich Prokudin-Gorskii as part of his work to document the Russian Empire from 1909... Download high resolution version (704x601, 89 KB) Alternators made in Budapest, Hungary, in the power generating hall of a hydroelectric station in Iolotan on the Murghab River Early color photograph from Russia, created by Sergei Mikhailovich Prokudin-Gorskii as part of his work to document the Russian Empire from 1909... This article does not cite any references or sources. ... Hydroelectric dam diagram The waters of Llyn Stwlan, the upper reservoir of the Ffestiniog Pumped-Storage Scheme in north Wales, can just be glimpsed on the right. ... Generator redirects here. ... City lights viewed in a motion blurred exposure. ... Generator redirects here. ...

History

Alternating current generating systems were known in simple forms from the discovery of the magnetic induction of electric current. The early machines were developed by pioneers such as Michael Faraday and Hippolyte Pixii. Faraday developed the "rotating rectangle", whose operation was heteropolar.^[1] The first public demonstration of a more robust "alternator system" took place in 1886.^[2] Large two-phase alternating current generators were built by a British electrician, J.E.H. Gordon, in 1882. Lord Kelvin and Sebastian Ferranti also developed early alternators, producing frequencies between 100 and 300 hertz. In 1891, Nikola Tesla patented a practical "high-frequency" alternator (which operated around 15,000 hertz).^[3] After 1891, polyphase alternators were introduced to supply currents of multiple differing phases.^[4] Later alternators were designed for varying alternating-current frequencies between sixteen and about one hundred hertz, for use with arc lighting, incandescent lighting and electric motors.^[5] Electromagnetic induction is the production of an electrical potential difference (or voltage) across a conductor situated in a changing magnetic flux. ... Michael Faraday, FRS (September 22, 1791 – August 25, 1867) was an English chemist and physicist (or natural philosopher, in the terminology of that time) who contributed significantly to the fields of electromagnetism and electrochemistry. ... Hippolyte Pixii (1808 - 1835) was an instrument maker from Paris, France. ... William Thomson, Archbishop of York, has the same name as this man. ... Sebastian Ziani de Ferranti (1864-1930) was an electrical engineer and inventor. ... Year 1891 (MDCCCXCI) was a common year starting on Thursday (link will display the full calendar) of the Gregorian calendar (or a common year starting on Saturday of the 12-day slower Julian calendar). ... Nikola Tesla (1856-1943)[1] was a world-renowned Serbian inventor, physicist, mechanical engineer and electrical engineer. ... MHZ redirects here. ... A polyphase system is a means of distributing alternating current electrical power. ...

Theory of operation

Alternators generate electricity by the same principle as DC generators, namely, when the magnetic field around a conductor changes, a current is induced in the conductor. Typically, a rotating magnet called the rotor turns within a stationary set of conductors wound in coils on an iron core, called the stator. The field cuts across the conductors, generating an electrical current, as the mechanical input causes the rotor to turn. The rotor is the non-stationary part of a rotary electric motor or alternator, which rotates because the wires and magnetic field of the motor are arranged so that a torque is developed about the rotors axis. ... The stator is the fixed part of a rotating machine. ...

The rotor magnetic field may be produced by induction (in a "brushless" alternator), by permanent magnets (in very small machines), or by a rotor winding energized with direct current through slip rings and brushes. The rotor magnetic field may even be provided by stationary field winding, with moving poles in the rotor. Automotive alternators invariably use a rotor winding, which allows control of the alternator generated voltage by varying the current in the rotor field winding. Permanent magnet machines avoid the loss due to magnetizing current in the rotor, but are restricted in size, owing to the cost of the magnet material. Since the permanent magnet field is constant, the terminal voltage varies directly with the speed of the generator. Brushless AC generators are usually larger machines than those used in automotive applications. In electrical engineering, a slip ring is a method of making an electrical connection through a rotating assembly. ...

Automotive alternators

Alternators are used in automobiles to charge the battery and to power a car's electric system when its engine is running. Alternators have the great advantage over direct-current generators of not using a commutator, which makes them simpler, lighter, less costly, and more rugged than a DC generator. The stronger construction of automotive alternators allow them to turn twice as fast as the engine, improving output when the engine is idling. The availability of low-cost solid-state diodes from about 1960 allowed auto manufacturers to substitute alternators for DC generators. Automotive alternators use a set of rectifiers (diode bridge) to convert AC to DC. To provide direct current with low ripple, automotive alternators have a three-phase winding. Karl Benzs Velo model (1894) - entered into the first automobile race An automobile or motor car (usually shortened to just car) is a wheeled passenger vehicle that carries its own motor. ... A Pair of AA Energizer Alkaline Cells Symbols representing a single Cell (top) and Battery (bottom), used in circuit diagrams. ... This article does not cite any references or sources. ... Conventional continuous current flows from the battery. ... Types of diodes A diode functions as the electronic version of a one-way valve. ... AC, half-wave and full wave rectified signals A rectifier is an electrical device, comprising one or more semiconductive devices (such as diodes) or vacuum tubes arranged for converting alternating current to direct current. ... Three bridge rectifiers. ... City lights viewed in a motion blurred exposure. ... Direct current (DC or continuous current) is the continuous flow of electricity through a conductor such as a wire from high to low potential. ... Three phase systems have 3 waveforms (usually carrying power) that are 2/3π radians (120 degrees,1/3 of a cycle) offset in time. ...

Typical passenger vehicle and light truck alternators use Lundell or claw-pole field construction, where the field north and south poles are all energized by a single winding, with the poles looking rather like fingers of two hands interlocked with each other. Larger vehicles may have salient-pole alternators similar to larger machines. The automotive alternator is usually belt driven at 2-3 times the engine crankshaft speed.

Modern automotive alternators have a voltage regulator built into them. The voltage regulator operates by modulating the small field current in order to produce a constant voltage at the stator output. The field current is much smaller than the output current of the alternator; for example, a 70-amp alternator may need only 2 amps of field current. A voltage regulator is an electrical regulator designed to automatically maintain a constant voltage level. ...

Efficiency of automotive alternators is limited by fan cooling loss, bearing loss, iron loss, copper loss, and the voltage drop in the diode bridges; at part load, efficiency is between 50-62% depending on the size of alternator, and varies with alternator speed.^[6] In comparison, the best permanent magnet generators, such as those used for bicycle lighting systems, achieve an efficiency of around only 60%. In physics and engineering, including mechanical and electrical engineering, energy efficiency is a dimensionless number, with a value between 0 and 1 or with times 100 given in percent. ... Bicycle lighting has two purposes: seeing and being seen. ...

The field windings are initially supplied via the ignition switch and charge warning light, which is why the light glows when the ignition is on but the engine is not running. Once the engine is running and the alternator is generating, a diode feeds the field current from the alternator main output, thus equalizing the voltage across the warning light which goes out. The wire supplying the field current is often referred to as the "exciter" wire. The drawback of this arrangement is that if the warning light fails or the "exciter" wire is disconnected, no priming current reaches the alternator field windings and so the alternator will not generate any power. However, some alternators will self-excite when the engine is revved to a certain speed. The driver may check for a faulty exciter-circuit by ensuring that the warning light is glowing with the engine stopped. Types of diodes. ...

Very large automotive alternators used on buses, heavy equipments or emergency vehicles may produce 300 amperes. Very old automobiles with minimal lighting and electronic devices may have only a 30 ampere alternator. Typical passenger car and light truck alternators are rated around 70 amperes, though higher ratings are becoming more common. Very large automotive alternators may be water-cooled or oil-cooled.

Many alternators are also linked to the vehicles on board computer system, and in recent years many other factors including air flow are considered in adjusting the battery charging voltage supplied by the alternator.

Brushless Alternators

Terminology

The stationary part of a motor or alternator is called the stator and the rotating part is called the rotor. The coils of wire that are used to produce a magnetic field are called the field and the coils that produce the power are called the armature. The coils of wire that are used to create the field and the armature are sometimes referred to as the “windings”.

Construction

A brushless alternator is composed of two alternators built end-to-end on one shaft. Smaller brushless alternators may look like one unit but the two parts are readily identifiable on the large versions. The larger of the two sections is the main alternator and the smaller one is the exciter. The exciter has stationary field coils and a rotating armature (power coils). The main alternator uses the opposite configuration with a rotating field and stationary armature.

Exciter

The exciter field coils are on the stator and its armature is on the rotor. The AC output from the exciter armature is fed through a set of diodes that are also mounted on the rotor to produce a DC voltage. This is fed directly to the field coils of the main alternator, which are also located on the rotor. With this arrangement, brushes and slip rings are not required to feed current to the rotating field coils. This can be contrasted with a simple automotive alternator where brushes and slip rings are used to supply current to the rotating field.

Main Alternator

The main alternator has a rotating field as described above and a stationary armature (power generation windings). With the armature stationary, the high current output does not have to go through brushes and slip rings. Although the electrical design is more complex, it results in a very reliable alternator because the only parts subject to wear are the bearings.

Control System

Varying the amount of current through the stationary exciter field coils controls the strength of the magnetic field in the exciter. This in turn controls the output from the exciter. The exciter output is fed into the rotating field of the main alternator to supply the magnetic field for it. The strength of the magnetic field in the main alternator then controls its output. The result of all this is that a small current, in the field of the exciter indirectly controls the output of the main alternator and none of it has to go through brushes and slip-rings.

AVR

AVR is an abbreviation for Automatic Voltage Regulator. An AVR serves the same function as the “voltage regulator” in an automobile or the “regulator” or “controller” in a home power system.

Hybrid automobiles

Hybrid automobiles replace the separate alternator and starter motor with a combined motor/generator that performs both functions, cranking the internal combustion engine when starting, providing additional mechanical power for accelerating, and charging a large storage battery when the vehicle is running at constant speed. These rotating machines have considerably more powerful electronic devices for their control than the simple automotive alternator described above. Honda Insight, a hybrid gas-electric vehicle 2004 Toyota Prius, a hybrid gas-electric vehicle A hybrid vehicle uses multiple propulsion systems to provide motive power. ...

Radio alternators

Main article: Alexanderson alternator

Extending Tesla's work on high-frequency alternators, high frequency alternators of the variable-reluctance type were applied commercially to radio transmission in the low-frequency radio bands. These were used for transmission of Morse code and, experimentally, for transmission of voice and music. Alexanderson Alternator in the Grimeton VLF transmitter. ... 1922 Chart of the Morse Code Letters and Numerals Morse code is a method for transmitting telegraphic information, using standardized sequences of short and long elements to represent the letters, numerals, punctuation and special characters of a message. ...

Notes

See also

• Electrical generator as in pre-1960 motor cars
• Linear alternator

“Dynamo” redirects here. ... The simplest type of Linear alternator is a torch (UK) or flashlight (USA) which contains a coil and a permanent magnet. ...

References

• Thompson, Sylvanus P., Dynamo-Electric Machinery, A Manual for Students of Electrotechnics, Part 1, Collier and Sons, New York, 1902
• White, Thomas H.,"Alternator-Transmitter Development (1891-1920)". EarlyRadioHistory.us.

Alternators

• "Alternators". Integrated Publishing (TPub.com).
• "Wooden Low-RPM Alternator". ForceField, Fort Collins, Colorado, USA.
• "Understanding 3 phase alternators". WindStuffNow.
• Author unknown, "Alternator secrets". date unknown.
• "Alternator, Arc and Spark. The first Wireless Transmitters". The G0UTY Homepage.
• Tesla, Nikola, "The Ewing High-Frequency Alternator and Parson's Steam Engine". 12-17-1892. (Pepe's Tesla Pages, DOC)
• First practical alternating current with transformers system demonstrated (by William Stanley)