|
Laser cooling is a technique that uses light to cool atoms to a very low temperature. It was simultaneously proposed by Wineland and Dehmelt and by Theodor W. Hänsch and Arthur Leonard Schawlow in 1975, and first demonstrated by Wineland and coworkers in 1978. One conceptually simple form of laser cooling is referred to as optical molasses, since the dissipative optical force resembles the viscous drag on a body moving through molasses. Steven Chu, Claude Cohen-Tannoudji and William D. Phillips were awarded the 1997 Nobel Prize in Physics for their work in laser cooling. Prism splitting light Light is electromagnetic radiation with a wavelength that is visible to the eye (visible light) or, in a technical or scientific context, electromagnetic radiation of any wavelength[1]. The elementary particle that defines light is the photon. ...
Theodor Wolfgang Hänsch (b. ...
Arthur Leonard Schawlow (May 5, 1921-April 28, 1999) was an American physicist. ...
In physics, dissipation embodies the concept of a dynamical system where important mechanical modes, such as waves or oscillations, lose energy over time, typically due to the action of friction or turbulence. ...
In physics, force is an influence that may cause a body to accelerate. ...
Viscosity is a measure of the resistance of a fluid to deformation under shear stress. ...
How it works
Brief explanation This technique works by tuning the frequency of light slightly below an electronic transition in the atom. Because the light is detuned to the "red" (i.e. at lower frequency) of the transition, the atoms will absorb more photons if they move towards the light source, due to the Doppler effect. Thus if one applies light from two opposite directions, the atoms will always scatter more photons from the laser beam pointing opposite to their direction of motion. In each scattering event the atom loses a momentum equal to the momentum of the photon. If the atom, which is now in the excited state, emits a photon spontaneously, it will be kicked by the same amount of momentum but in a random direction. The result of the absorption and emission process is to reduce the speed of the atom, provided its initial speed is larger than the recoil velocity from scattering a single photon. If the absorption and emission are repeated many times, the mean velocity, and therefore the kinetic energy of the atom will be reduced. Since the temperature of an ensemble of atoms is a measure of the random internal kinetic energy, this is equivalent to cooling the atoms. Molecular electronic transitions take place when valence electrons in a molecule are excited from one energy level to a higher energy level. ...
Atomic redirects here. ...
The word light is defined here as electromagnetic radiation of any wavelength; thus, X-rays, gamma rays, ultraviolet light, microwaves, radio waves, and visible light are all forms of light. ...
A source of waves moving to the left. ...
A laser (acronym for light amplification by stimulated emission of radiation) is an optical source that emits photons in a coherent beam. ...
In classical mechanics, momentum (pl. ...
The velocity of an object is its speed in a particular direction. ...
Kinetic energy is the energy by virtue of the motion of an object. ...
Fig. ...
Detailed explanation The vast majority of photons that come anywhere near a particular atom are completely unaffected by that atom. The atom is completely transparent to most frequencies (colors) of photons.
A few photons happen to "resonate" with the atom, in a few very narrow bands of frequencies (a single color rather than a mixture like white light). When one of those photons comes close to the atom, the atom typically absorbs that photon (absorption spectrum) for a brief period of time, then emits an identical photon (emission spectrum) in some random, unpredictable direction. (Other sorts of interactions between atoms and photons exist, but are not relevant to this article.) This article is about resonance in physics. ...
White rose. ...
A materials absorption spectrum shows the fraction of incident electromagnetic radiation absorbed by the material over a range of frequencies. ...
A materials emission spectrum is the amount of electromagnetic radiation of each frequency it emits when it is heated (or more generally when it is excited). ...
The popular idea that one can heat up and vaporize objects with a laser is not exactly true when we are looking at individual atoms. If we have an atom that is practically motionless (a "cold" atom), and control the frequency of the laser we shine at it, we find that most frequencies just pass by the atom — it is invisible at those frequencies. There are only a few points on our frequency control dial that have any effect on that atom. At those frequencies, the photon slams into the atom, the atom starts drifting away from the laser, and later the atom releases the photon. If it happens to shoot the photon towards the laser, it makes the atom drift away from the laser twice as fast. If it happens to shoot the photon directly away from the laser, then the atom stops and becomes motionless again. But usually the photon speeds away in some other direction, giving the atom at least some sideways thrust.
Another way of changing frequencies is to move the laser. Imagine that we have a fixed-frequency (single-color) laser that has a frequency that is a little below one of the "resonant" frequencies of this atom (this laser will go right through our atoms without affecting them.) If we strapped that laser to the front of a train coming towards us (and our pile of cold atoms), then the doppler effect would raise its frequency. At one specific velocity, the frequency would be just right for these atoms to start absorbing those photons. A source of waves moving to the left. ...
Yet another way of changing frequencies is to move the atoms. If we bolt that laser to the ground, and put an iceball of cold atoms in the beam, then normally the laser beam would pass right through the transparent iceball. But at one specific speed of the iceball towards the laser, suddenly the iceball will absorb photons slamming into it. That slows down the iceball. The iceball will also emit photons in all directions. That accelerates the atoms in the iceball in all directions, which is pretty much the definition of a higher temperature.
Something very similar happens in a laser cooling apparatus, except we start with a warm cloud of atoms moving in all directions at all different speeds. We start with a laser frequency well below the resonant frequency. Photons from any one laser pass right through the majority of atoms. However, atoms moving rapidly towards a particular laser catch the photons for that laser, slowing those atoms down until they become transparent again. (Atoms rapidly moving away from that laser are transparent to that laser's photons — but they are rapidly moving towards the laser directly opposite it).
On a graph of atom velocities (atoms moving rapidly to the right correspond with stationary dots far to the right, atoms moving rapidly to the left correspond with stationary dots far to the left), there is a narrow band on the left edge corresponding to the speed those atoms start absorbing photons from the left laser. Atoms in that band are the only ones that interact with the left laser. When a photon from the left laser slams into one of those atoms, it suddenly slows down an amount corresponding to the momentum of that photon (we redraw that dot some fixed "quantum" distance further to the right). If the atom releases the photon directly to the right, then we redraw the dot that same distance to the left, putting it back in the narrow band of interaction. But usually the atom releases the photon in some other random direction, and we redraw the dot that quantum distance in the opposite direction.
We design the apparatus with many lasers, corresponding to many boundary lines that completely surround that cloud of dots.
As we ramp the laser frequency up, the boundary contracts, pushing all the dots on that graph towards zero velocity. That's the definition of "cold".
Limitations The atom performs a random walk in momentum space with steps equal to the photon momentum due to spontaneous emission and photon absorption. This constitutes a heating effect, which counteracts the cooling process and imposes a limit on the amount by which the atom can be cooled. Moreover, the optical transition used for cooling in reality must have a finite frequency width, which limits the velocity discrimination (i.e. the likelihood that an atom will scatter light from the "correct" beam, as described above), and therefore the temperature. This temperature is called the Doppler temperature. Lower temperatures, down to the recoil temperature, may be obtained by sub-Doppler cooling. Beyond that, evaporative cooling is used to further cool the ultracold atoms. In mathematics, computer science, and physics, a random walk, sometimes called a drunkards walk, is a formalisation of the intuitive idea of taking successive steps, each in a random direction. ...
In physics, absorption is the process by which the energy of a photon is taken up by another entity, for example, by an atom whose valence electrons make a transition between two electronic energy levels. ...
Doppler temperature is the minimum achievable temperature with Doppler cooling, one of the methods of laser cooling. ...
In laser cooling, the Boltzmann constant times the recoil temperature is equal to the recoil energy deposited in a single atom initially at rest by the spontaneous emission of a single photon. ...
Evaporative cooling is a system in which latent heat of evaporation is used to carry heat away from an object to cool it. ...
Ultracold atoms is a term used to describe atoms that are maintained at temperatures close to 0 kelvin (Absolute Zero), where their quantum-mechanical properties become important. ...
Configurations Counterpropagating sets of laser beams in all three Cartesian dimensions may be used to cool all the three degrees of freedom of the atom. Common laser-cooling configurations include optical molasses, the magneto-optical trap, and the Zeeman slower. Cartesian means of or relating to the French philosopher and mathematician René Descartes. ...
Degrees of freedom is a general term used in explaining dependence on parameters, and implying the possibility of counting the number of those parameters. ...
The Zeeman effect (IPA ) is the splitting of a spectral line into several components in the presence of a magnetic field. ...
See also Resolved sideband cooling is a laser cooling technique to cool a ion in a trap (for example Penning trap) to the ground state of motion. ...
An optical tweezer is a scientific instrument that uses a focused laser beam to provide an attractive force (typically on the order of piconewtons) to physically hold and move microscopic dielectric objects. ...
External links - Introductory laser cooling explanation with several applets
|
Feeds |
Contact