|
Toyota Motor Corporation's M family of engines were a longitudinally mounted straight-6 engine design. They were used from the 1960s through the 1990s. All M family engines were OHC designs. While the M family was born with a chain-driven single camshaft it evolved into a belt drive DOHC system after 1980. All M family engines used a cast-iron block with an aluminum cylinder head. The Japanese market only M-E was the first Toyota engine to be equipped with fuel injection (at the same time as the 4 cylinder 18R-E). The 4M-E was the first Toyota engine to be equipped with fuel injection for non Japanese markets. The M family were Toyota's most prestigious engines (apart from the uncommon V family V8) for 30 years. They were commonly found on the large Toyota Crown, Cressida, Celica Supra, and Supra models. Image File history File linksMetadata 2000gtengine. ...
Automakers, also known as carmakers, automobile manufacturers, motor manufacturers, or the automobile industry are companies that design and manufacture automobiles. ...
To meet Wikipedias quality standards, this article may require cleanup. ...
Year 1965 (MCMLXV) was a common year starting on Friday (link will display full calendar) of the 1965 Gregorian calendar. ...
Year 1993 (MCMXCIII) was a common year starting on Friday (link will display full 1993 Gregorian calendar). ...
To meet Wikipedias quality standards, this article may require cleanup. ...
The straight-6 (also inline 6, I-6, or I6) is an internal combustion engine with six cylinders aligned in a single row. ...
Overhead cam (OHC) piston engines place the camshaft above the cylinder heads and drive the valves or lifters directly instead of using pushrods. ...
Computer animation of a camshaft The camshaft is an apparatus often used in piston engines to operate poppet valves. ...
A double overhead cam (also called a dual overhead cam, DOHC, or twincam) engine is a type of internal combustion engine where the camshafts that operate the intake and exhaust valves are mounted above the cylinders, and where there are separate camshafts for inlet and exhaust valves. ...
For the cookware, see Cast iron cookware. ...
Aluminum is a soft and lightweight metal with a dull silvery appearance, due to a thin layer of oxidation that forms quickly when it is exposed to air. ...
The cylinder head from a GMC van. ...
Toyota Motor Corporations M family of engines were a longitudinally mounted straight-6 engine design. ...
// Fuel injection is a means of metering fuel into an internal combustion engine. ...
// Fuel injection is a means of metering fuel into an internal combustion engine. ...
Toyota Motor Corporations V family of engines were a longitudinally mounted V8 engine design. ...
The Liberty V8 aircraft engine clearly shows the configuration A V8 engine is a V engine with eight cylinders. ...
The Toyota Crown is a line of full-size luxury sedans by Toyota. ...
The Toyota Cressida was a mid-size, high-end luxury sedan introduced by Toyota in 1973, first exported in its second generation in 1977. ...
This article is about the automobile. ...
This article is about the automobile. ...
M
The first M was a 2.0 L (1988 cc) version produced from 1965 through 1988. It was a 2-valve SOHC engine. Cylinder bore and stroke was square at 75 mm (2.95 in). Output was 110 hp (82 kW) at 5600 rpm and 116 ft·lbf (157 Nm) at 3800 rpm. Single overhead cam (also SOHC) refers to the internal combustion engine design where one camshaft is located above the valves. ...
An LPG version, the M-LPG, was produced from 1966 through 1988. Autogas is the common name for liquified petroleum gas when it is used as a fuel in internal combustion engines in vehicles. ...
Twin SU sidedraft carburetors pushed output for the M-B and M-D to 129 hp. Bendix-Technico (Stromberg) 1-barrel downdraft carburetor model BXUV-3, with nomenclature The carburetor, carburettor, or carburetter (see spelling differences), also called carb (in North America) or carbie (chiefly in Australia) for short, is a device that blends air and fuel for an internal combustion engine. ...
Anti emissions versions, the M-U, M-U LPG and M-EU, replaced the M, M-LPG and M-E on the Japanese market in mid 1976.
Applications:
The Toyota Crown is a line of full-size luxury sedans by Toyota. ...
The Toyota Corona Mark II was an upscale version of the Toyota Corona sedan. ...
M-E The M-E appeared in the 1972-1976 Toyota Corona Mark II LG sedan and hardtop as sold in Japan. It was not sold outside of Japan. The Toyota Corona Mark II was an upscale version of the Toyota Corona sedan. ...
The M-E was replace by the anti emissions M-EU in mid 1976.
Applications:
The Toyota Corona Mark II was an upscale version of the Toyota Corona sedan. ...
M-T The turbocharged M-TEU appeared in 1980 with 145 hp (108 kW) at 5600 rpm and 156 ft·lbf (211 Nm) at 3000 rpm. It used a Garret T-03 turbo. Turbocharger Cut-away A turbocharger is a device used in internal-combustion engines to increase the power output of the engine by increasing the mass of oxygen and fuel entering the engine. ...
Meanings for the term include: Attic (always capitalised) is an adjective for something or someone coming from Attica or Athens. ...
In 1983, Toyota added an air/water intercooler to the M-TEU. Output was bumped to 160 hp (119 kW) at 5600 rpm and 170 ft·lbf (230 Nm) at 3000 rpm. An intercooler, or charge air cooler, is an air-to-air or air-to-liquid heat exchange device used on turbocharged and supercharged internal combustion engines to improve their volumetric efficiency by increasing intake air charge density through isochoric cooling. ...
Applications:
This article is about the automobile. ...
It has been suggested that this article or section be merged into Lexus SC. (Discuss) 2nd Generation Toyota Soarer 3rd Generation Toyota Soarer The Toyota Soarer was a personal luxury coupé sold by Toyota in Japan from 1981 to 2005. ...
The Toyota Crown is a line of full-size luxury sedans by Toyota. ...
The Toyota Corona Mark II was an upscale version of the Toyota Corona sedan. ...
This article is about the automobile. ...
2M The 2-valve SOHC 2M was stroked (to 85 mm/3.35 in) for 2.3 L (2253 cc). It was produced from 1966 through 1972. Output was 109-115 hp (81-86 kW) at 5200 rpm and 117-123 ft·lbf (158-166 Nm) at 3600 rpm. Image File history File linksMetadata Download high-resolution version (1024x768, 381 KB) Toyota 2M engine. ...
Image File history File linksMetadata Download high-resolution version (1024x768, 381 KB) Toyota 2M engine. ...
Single overhead cam (also SOHC) refers to the internal combustion engine design where one camshaft is located above the valves. ...
2M engines were placed in the Crown, Corona Mark II, and 9 special MF-12 2000GTs. [1]
Applications:
The Toyota Crown is a line of full-size luxury sedans by Toyota. ...
The Toyota Corona Mark II was an upscale version of the Toyota Corona sedan. ...
The Toyota 2000GT was a sports car produced in very limited numbers by Toyota in Japan. ...
3M Another 2.0 L (1988 cc) inline 6 engine, the 2-valve DOHC 3M, was produced from 1966 through 1971. This special engine shared the original M's block but featured an aluminum sump, a special Yamaha-designed aluminum head with wide 79° valves and a hemispherical shape. It powered the Yamaha/Toyota 2000GT, the original Japanese supercar. Output was 150 hp (112 kW) at 6600 rpm and 172 ft·lbf (233 Nm) at 4800 rpm. Image File history File linksMetadata 2000gtengine. ...
Image File history File linksMetadata 2000gtengine. ...
A double overhead cam (also called a dual overhead cam, DOHC, or twincam) engine is a type of internal combustion engine where the camshafts that operate the intake and exhaust valves are mounted above the cylinders, and where there are separate camshafts for inlet and exhaust valves. ...
Yamaha Motor Company Limited (ヤマãƒç™ºå‹•æ©Ÿæ ªå¼ä¼šç¤¾) TYO: 7272 , a Japanese motorized vehicle-producing company, was initially part of the Yamaha Corporation. ...
The Toyota 2000GT was a sports car produced in very limited numbers by Toyota in Japan. ...
For other uses, see Supercar (disambiguation). ...
Applications:
The Toyota 2000GT was a sports car produced in very limited numbers by Toyota in Japan. ...
4M The engine was bored out to 80 mm (3.15 in) to create the 2.6 L (2563 cc) 2-valve SOHC 4M. Produced from 1972 through 1980, output was 108-122 hp (81-91 kW) at 5600 rpm and 134-141 ft·lbf (181-191 Nm) at 3600 rpm. Single overhead cam (also SOHC) refers to the internal combustion engine design where one camshaft is located above the valves. ...
The fuel injected 4M-E was produced from 1978 through 1980. It was also a 2-valve SOHC engine. Output was 110 hp (82 kW) at 4800 rpm and 136 ft·lbf (184 Nm) at 2400 rpm. Fuel injection is a technology used in internal combustion engines to mix the fuel with air prior to combustion. ...
Single overhead cam (also SOHC) refers to the internal combustion engine design where one camshaft is located above the valves. ...
Applications:
This article is about the automobile. ...
The Toyota Crown is a line of full-size luxury sedans by Toyota. ...
5M The Bore was up again to 83.1 mm (3.27 inches) in the 2.8 L (2759 cc) 5M, produced from 1979 through 1988. Although 2-valve SOHC and carbureted versions were made, it is the fuel injected DOHC 5M-GE that is the most common. Single overhead cam (also SOHC) refers to the internal combustion engine design where one camshaft is located above the valves. ...
Bendix-Technico (Stromberg) 1-barrel downdraft carburetor model BXUV-3, with nomenclature The carburetor, carburettor, or carburetter (see spelling differences), also called carb (in North America) or carbie (chiefly in Australia) for short, is a device that blends air and fuel for an internal combustion engine. ...
Fuel injection is a technology used in internal combustion engines to mix the fuel with air prior to combustion. ...
A double overhead cam (also called a dual overhead cam, DOHC, or twincam) engine is a type of internal combustion engine where the camshafts that operate the intake and exhaust valves are mounted above the cylinders, and where there are separate camshafts for inlet and exhaust valves. ...
The SOHC engine produced just 116 hp (87 kW) at 4800 rpm and 145 ft·lbf (196 Nm) at 3600 rpm. Single overhead cam (also SOHC) refers to the internal combustion engine design where one camshaft is located above the valves. ...
In Australia the 5M-E (in 1985) was just 103 kW at 4800 rpm and 226 Nm at 3600 rpm due to the leaded petrol at the time.
Applications:
The Toyota Crown is a line of full-size luxury sedans by Toyota. ...
The Toyota Crown is a line of full-size luxury sedans by Toyota. ...
This article is about the automobile. ...
This article is about the automobile. ...
The Toyota Cressida was a mid-size, high-end luxury sedan introduced by Toyota in 1973, first exported in its second generation in 1977. ...
5M-GE The 12-valve (2 valves per cylinder) DOHC 5M-GE is familiar as the engine of the Toyota Supra and Toyota Cressida of the 1980s. It was quite different from any previous member of the M family, with Bosch L Jetronic-derived electronic fuel injection (using an AFM intake measuring scheme), wide-angle valves, and belt-driven dual camshafts. It used hydraulic valve lifters, a first for Toyota. This version of the M made its US debut in 1982's Toyota Celica Supra MK2. The 1982 version had a vacuum-advance distributor, whereas the 1983-1987 versions found in the Celica Supra and Cressida had full electronic control of the ignition system and distributor. The newer engine control system found in these later cars was named TCCS, or Toyota Computer Control System. A double overhead cam (also called a dual overhead cam, DOHC, or twincam) engine is a type of internal combustion engine where the camshafts that operate the intake and exhaust valves are mounted above the cylinders, and where there are separate camshafts for inlet and exhaust valves. ...
This article is about the automobile. ...
The Toyota Cressida was a mid-size, high-end luxury sedan introduced by Toyota in 1973, first exported in its second generation in 1977. ...
Logo of Robert Bosch GmbH Robert Bosch GmbH [1] is a German corporation which was started in 1886 by Robert Bosch in Stuttgart, Germany. ...
Jetronic is a trade name for a type of fuel injection technology marketed by Bosch from the 1960s forward. ...
// Fuel injection is a means of metering fuel into an internal combustion engine. ...
Computer animation of a camshaft The camshaft is an apparatus often used in piston engines to operate poppet valves. ...
This article is about the automobile. ...
Output ranged from 145 to 175 hp (108 and 130 kW respectively), depending on exhaust system, emissions controls, compression ratio, intake runner shape (earlier models had round intake runners and later models had D-shaped intake runners), and ECU tuning.
There were aftermarket crank and piston kits offered for the 5M-GE that took the displacement up to 2.9 L (for 230 hp/171 kW) and 3.1 L (for 250 hp/186 kW). Outfitted with kits like the Kuwahara 3100, these engines were often used quite successfully in powerboat racing in the mid 1980s.
Applications:
Differences between years on US model of the Celica Supra: This article is about the automobile. ...
The Toyota Cressida was a mid-size, high-end luxury sedan introduced by Toyota in 1973, first exported in its second generation in 1977. ...
The Toyota Crown is a line of full-size luxury sedans by Toyota. ...
It has been suggested that this article or section be merged into Lexus SC. (Discuss) 2nd Generation Toyota Soarer 3rd Generation Toyota Soarer The Toyota Soarer was a personal luxury coupé sold by Toyota in Japan from 1981 to 2005. ...
- 1982 Supra 5M-GE had vacuum-advance distributors and 9-to-0 volt output AFMs.
- 1982-1983 Supra 5M-GE had dual V-belt accessory drive, 65 amp alternator, square-tooth camshaft belts, 8.8:1 compression ratio, shallower oil pan, and round intake runners.
- 1983-1985.5 Supra 5M-GE had 0-to-5 volt output AFM's and TCCS.
- 1984-1985.5 Supra 5M-GE had 7-rib serpentine accessory drive belts, 60 amp alternator, round-tooth camshaft belts, 9.2:1 compression ratio, knock sensor, deeper oil pan, and D-shaped intake runners.
6M-GE The 5M-GE was stroked to 91 mm (3.58 in) to create the 3.0 L (2954 cc) 6M-GE. Only produced in 12-valve (2 valves per cylinder) DOHC/fuel injected versions, it was available as the 6M-GE and Japan-spec 6M-GEU from 1984 through 1987. The 6M engine used the same crank, machined to accept a different torsional dampener, as the 1986-1989 7M-GE engines; this fact is witnessed by the designation "7M" stamped on the counterweight of the crank on the later 1989-1992 7M engines. The 6M crank did not have counterweights on cylinders 2 and 5, making it lighter and prone to rev a tad higher. A double overhead cam (also called a dual overhead cam, DOHC, or twincam) engine is a type of internal combustion engine where the camshafts that operate the intake and exhaust valves are mounted above the cylinders, and where there are separate camshafts for inlet and exhaust valves. ...
Fuel injection is a technology used in internal combustion engines to mix the fuel with air prior to combustion. ...
Torsional vibration is vibration of an object, commonly a shaft, along its axis of rotation. ...
Output was 170-190 hp (127-142 kW) at 5600 rpm and 170-192 ft·lbf (230-260 Nm) at 4400 rpm. The 6M-GEU is usually the lower powered variant of 6M engines.
Applications:
The Toyota Crown is a line of full-size luxury sedans by Toyota. ...
It has been suggested that this article or section be merged into Lexus SC. (Discuss) 2nd Generation Toyota Soarer 3rd Generation Toyota Soarer The Toyota Soarer was a personal luxury coupé sold by Toyota in Japan from 1981 to 2005. ...
7M-GE The Toyota 7M-GE introduced in the early months of 1986 is a 3.0 litre (2954 cc) 24-valve (4 valves per cylinder) DOHC/fuel injected engine. The valves are spaced at a performance-oriented 50° angle. Cylinder bore is 83 mm (3.27 in) and stroke is 91 mm (3.58 in). A 7M-GE Engine The 7M-GE and 7M-GTE were both high-performance engines used by Toyota in the 1980s and early 1990s. ...
A double overhead cam (also called a dual overhead cam, DOHC, or twincam) engine is a type of internal combustion engine where the camshafts that operate the intake and exhaust valves are mounted above the cylinders, and where there are separate camshafts for inlet and exhaust valves. ...
Fuel injection is a technology used in internal combustion engines to mix the fuel with air prior to combustion. ...
The 7M-GE was produced from 1986 through 1992. Output was 190-204 hp (142-152 kW) at 6000 rpm and 185-196 ft·lbf (250-265 Nm) at 4800 rpm.
Notwithstanding the technical sophistication and powerful output of the engine, it was plagued with the problem of regularly blowing head gaskets. This was because the head gasket was originally meant to be made out of asbestos; at the last second they changed the material--but not the 56 ft·lbf torque spec. The turbo version 7M-GTE suffered from the same problem. Permanent fixes typically involved a metal after-market headgasket, higher torque settings (usually 70-80 ft·lbf) and upgrading to head studs (through the ubiquitous ARP and their hardware) rather than bolts. Toyota Motor Corporations M family is a straight-6 engine design used from the 1960s through the 1990s. ...
Specifications:
- Displacement: 2954 cc (180.2 cu in)
- Bore: 83.00 mm (3.27 in)
- Stroke: 91.00 mm (3.58 in)
- Compression Ratio: 9.1:1
- Weight: 119.5 kg (440 lb)
Applications: This article is about the automobile. ...
It has been suggested that this article or section be merged into Lexus SC. (Discuss) 2nd Generation Toyota Soarer 3rd Generation Toyota Soarer The Toyota Soarer was a personal luxury coupé sold by Toyota in Japan from 1981 to 2005. ...
The Toyota Cressida was a mid-size, high-end luxury sedan introduced by Toyota in 1973, first exported in its second generation in 1977. ...
To meet Wikipedias quality standards, this article or section may require cleanup. ...
The Toyota Crown is a line of full-size luxury sedans by Toyota. ...
7M-GTE The turbocharged 7M-GTE was Toyota's top performance engine from 1987 through 1992. Output was 232 hp (173 kW) at 5600 rpm and 240 ft·lbf (325 Nm) at 4000 rpm for most 5 lbf/in²/0.35 bar versions. Turbocharger Cut-away A turbocharger is a device used in internal-combustion engines to increase the power output of the engine by increasing the mass of oxygen and fuel entering the engine. ...
The bar (symbol bar), decibar (symbol dbar) and the millibar (symbol mbar, also mb) are units of pressure. ...
A special 7M-GTEu version, with a modified CT26 high-flow turbocharger and large volume intercooler, pushed output to 267 hp (199.1 kW) at 5600 rpm and 264 ft·lbf (357 Nm) at 4400 rpm. This was used only in the racing homologation Toyota Supra Turbo A road and race cars. The Turbo A models also measured air based on manifold pressure rather than using an air flow meter, had a larger intercooler, larger throttle body, optimized CT-26 turbo, and various other differences. In fact, for the short time it was produced, it was the fastest Japanese car ever made.
Specifications:
- Displacement: 2954 cc (180.2 cu in)
- Bore: 83.00 mm (3.27 in)
- Stroke: 91.00 mm (3.58 in)
- Compression Ratio: 8.4:1
- Weight: 119.5 kg (440 lb)
Applications: This article is about the automobile. ...
It has been suggested that this article or section be merged into Lexus SC. (Discuss) 2nd Generation Toyota Soarer 3rd Generation Toyota Soarer The Toyota Soarer was a personal luxury coupé sold by Toyota in Japan from 1981 to 2005. ...
See also | 
Feeds |
Contact